I edited a photo and saved it.  Then couldn't find it in the organizer!

I had a couple photos in the organizer that I edited.  After editing I saved them (I'm pretty sure).  Then I couldn't find them in the organizer.  They seem to have disappeared.  Where did they go?  I certainly never deleted them!

It was Elements 12.  The photos were opened from the Organizer.  99+% of them return there OK.  A couple didn't out of thousands.  I don't remember what I did to them specifically in returning them--assume I did the same with all.  With thousands of photos, I can't remember the file names in order to search for the ones missing.

Similar Messages

  • Images edited in PSE10 and saved as Jpegs open up too dark on the desktop. OS is windows 7.

    Hi I have a new Laptop runnings Windows 7 Home Premium. I installed PSE10 this week. I uploaded scans of my artwork and I resized them and adjust the blue colour (by only one click/ or 1 shade of blue.) I saved the image as a Jpg - high. It opens up on the desktop far too dark. How do I save the images to the desktop so that I can update my website using jpgs from teh desktop.
    Thank you

    Dear Ken
    I did as you suggest. Saving it for web and I increase blue by one grade and I get a workable jpg. But that bit too dark in comparison to the original. I had the colour setting correctly set. I can save the particular image with the right colours using pse5 on my old Laptop. On the new laptop if I use "increase" blue to lighten up the image it appears too blue in emails and also on my website it will give the wrong colour as if it is overblue....
    Your answer is very reassuring and I will do as you suggest.
    Many Thanks
    Paul;a

  • I am new to ipad and iphoto.  I edited a photo and then selected undo, to return it to the original.  Now there is a spinning disk on the screen and the program is frozen. What can I do now?  I can still access the same photo through the camera roll.

    I am new to ipad and iphoto.  I edited a photo and saved it.  Then used "undo" to change it back.  The thumbnail shows the edited version and the larger window shows the original version.  There is a whirling disk over the orginal version as if the program is stuck saving the reversion back to original.  None of the other features will work.  Turning it off doesn't help.  leaving it on indefinetely so it will "complete saving" doesn't work.  I don't have some of the keys and choices outlined with other posts about stuck iphoto on Macs.  Any help would be appreciated.

    Quit the app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

    Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

    Probably a good question to ask Viber or look at their support site.

  • Can't see iPhoto pics that are edited in PS and saved back to iPhoto

    Photos that are edited in Photoshop and saved back into iPhoto don't show up in the iPhoto window. Only the originals show up. When I do a search, I see that they are saved in a "modified" folder inside iPhoto. How can I see them in the iPhoto window? I would like to "trash" some of them. Can I just drag them to the trash from the "modified" folder or will that foul up the iPhoto database?
    Rick

    Maybe this will help:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    Click to view full size
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window
    Click to view full size
    that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
    Click to view full sizes
    I also suggest the Maximize PSD File Compatabilty be set to Always.
    In PSE’s General preference pane set the Color Picker to Apple as shown:
    Click to view full size
    NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
    OT

  • My Lightroom 3 closed after trying to edit a photo and will not open again.  Help please!

    My Lightroom 3 closed after editing a photo and will not open again.  It says Lightroom is not working and Windows is looking for a solution.  I am in a bind and need my Lightroom opened asap.  Please help!

    In your operating system, go to the folder where your Lightroom catalog is stored and see if there is a file that ends with .lock
    If so, delete it and then LR will open properly.

  • Get i pad 4G 16 giga and i have many family photos and prived data then i will set up my business E-mail so any one can to see my data ??

    i get a prived i pad 4G 16 giga and i have many family photos and prived data then i will set up my business E-mail so any one can to see my data ??
    i have to set up an application in my company server in  so i ask about does my ipad secured ? if my college in germany ( it managment ) can to see or show any data in my i pad or not because they can make that in my blackberry mobile device and some one hacked my facebook account and opened it outside divece so please tell me about details ASAP
    <Email Edited by Host>

    Set up as New now, or set up from iCloud back up if you have this. Then you can Restore from Back Up on iTunes at a later time.

  • IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

    iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

    Hi Anjohi,
    Thanks for visiting Apple Support Communities.
    If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
    iOS: Edited photos show original photo after import or in other apps
    All the best,
    Jeremy

  • I up dated to the ios 5 and lost a few things like photos and contacts but then went to a concert and took photos when i came home i restored from last back-up got my old pictures back but lost the new ones. Is there any way i can recover the new ones?

    i up dated to the ios 5 and lost a few things like photos and contacts but then went to a concert and took photos when i came home i restored from last back-up got my old pictures back but lost the new ones. Is there any way i can recover the new ones?

    Please please help me, if you know how.

  • I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

    I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

    Hi Stephen, thanx...
    Yes, we are talking about FCP X...this is the thing:
    I worked on a project a few days ago and went to share - export movie.
    Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
    I tried to import the saved .mov file, but it opens the same....as one long clip...
    Pls help...thanx.

  • Scanning photo and does scan then states ;Non writable will not save?????

    scanning photo and does scan then states ;Non writable will not save?????

    If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I have bought a film from itunes and the credit has come out of my account, but i can't find the film anywhere, it said it was downloading, then i left the laptop and on return i couldn't find the film. how do i find the film?

    i have bought a film from itunes and the credit has come out of my account, but i can't find the film anywhere, it said it was downloading, then i left the laptop and on return i couldn't find the film. how do i find the film?

    Maybe it is in the Purchased category of iTunes,
    Try going there

  • I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    I am unable to open a project that I have worked on and saved.  I get an error message that the file is damaged and cannot be opened.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • IPhone 4 in recovery mode after failed update with most recent software (3/25/13), I only have the past 30 days worth of photos and my contacts in iCloud, how do I get the rest of my pictures off of my phone? I have read the apple article already.

    Basically headline says it all, my phone is in recovery mode following a failed update through the phone and I want all my photos back.  I have already read the "iOS: Unable to Update or Restore" and it indicates that when restoring through iTunes, you lose all data on the phone. I have checked my iCloud (I am a Windows7 user so uploading does not happen automatically, as I unfortunately just figured out) and it only will upload my past 30 days of photos and contacts, inline with what I've read about the cloud only storing 30 days of your past data. I really would like to get all of my photos off of my phone, I had photostream activated and most were in that stream. Is there anything I can do? I don't know what operating system is on there currently, but I have always updated my phone succesfully until today when this happened, so I'm assuming whatever is most up to date until today is the OS it has. Thank you!

    When your phone is in recovery mode, it's like it crashed.  The only way that you can get it out of recovery mode is by restoring, and this erases all your data as well.   
    You can believe what you wish by "reading all over the internet".  This is Apple's technical support forum.  We do know what we're talking about.
    since you have very important photos on your phone, why haven't you been importing them to your computer as soon as possible after taking them?  This is how the phone is meant to be used.  Keeping critical data on only a device which can be easily stolen, dropped and broken is just plain foolish.  Also, did you not back up your phone (as you should be doing with any computer) before attempting any operating system update?  As you've now just painfully learned, updates do not always go as planned.
    I'm sorry for your data loss, but let this be a very important lesson.  BTW, when was the last time you backed up your computer?  I'm sure you have important data on your computer.  Hard drives WILL fail.

  • I tried to sinc my photos and i ended up deleting off my phone all the pictures.  i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help

    i tried to sinc my photos and i ended up deleting off my phone all the pictures.  i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help
    and on a second problem.  I need to know for sure that my contacts are backed up on my computer

    Create a parent folder on your computer to store the named folders of photos that you want transferred to your iPhone. Under the Photos tab for your iPhone sync preferences with iTunes, select the parent folder. All named folders of photos within will be transferred to your iPhone as separate folders or albums.
    Regarding your 2nd question, this should be easy. Your contacts should be available on your computer with or without an iPhone or any cell phone, which can be lost or stolen.
    Although contacts are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, not a good idea to depend on this either since the iPhone backup includes a significant amount of other data. Contacts are designed to be synced with a supported address book app on your computer. With Windoze, this can be with Outlook 2003, 2007, or 2010 along with syncing calendar events and notes, or with the address book app used by Outlook Express with XP and by Windows Mail with Vista and Windows 7 called Windows Contacts for syncing contacts only.

Maybe you are looking for

  • Can't send mail to external recipients

    When I invite a new member to a collaboration room, and this member is registered in active directory with an email adress, all invitation and notification mail work as they should. However. I want to invite external users(external to our company) in

  • How do I add a management agent - mixed environment

    I'm running a mixed bag of 8.1, 9.2, and now 10.1 databases; mostly on Solaris 8. I've installed OEM 10.1 on WinNT, and it does a fine job of monitoring itself, but I'd like to add a management agent on one of our Solaris boxes. Our Solaris boxes hav

  • Reg Background Job Notifications

    Hi, I wanna add a user email id for background job failure notifications. How do I do that. Thanks NM

  • Why can't apple use both processors?

    My question that I have had in my mind for quite a while was how apple could just drop powerpc chips for intel. I know the basis of the decision for going to intel was that they had a better road map of putting better processors for their notebooks e

  • Virtual column not allowed while creating "simple view"

    hi, i have created a simple view systax: create view empvu30 as select empno id_number,ename Name,sal*12 ANN_SALARY from emp where deptno=30; when i am going to update this view i am getting error: ORA-01733: virtual column not allowed here