I edited a video with iMovie but I can not burn it to DVD because I get an "error" answer number 49!How may I correct this?
I took the video with my iPAD 2 then I send it to my Macbook through iTunes and edited the movie. Now everything is ready to be put on a DVD but I tryed to "finalise"but could get there because once for an error number 50, then I tryed to export it and got another error 49 ... I would like to put it on a DVD beore this saterday because the family is going back home and wold lke to have the movie of their just born baby at home.
Can somebody help me?
Thanks
Cesar
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W
Similar Messages
-
I just bought a macbook book pro. I was told by several people that it should have come with iMovie. I can't find it anywhere and it does not come up when I search for it. Someone else said that if it is not already on my computer I can download it for free? Please help! I would like to use it to burn some of my videos onto dvd.
Yes, your MBP should definitely have come with iMovie. If it doesn't have it, contact Apple directly and ask them what to do.
-
I purchased a video from iTunes but it will not sync to my iPod. I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod." I tried to use the "create an iPod version" but the command is grayed out
I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2 -
My iphone 4 is locked with icloud, but i can not contact the previous owner
My iphone 4 is locked with Icloud, but I can not contact the previous owner. help
gerardofromtijuana wrote:
how u can contact the previous owner?
thx
The same way you would contact anyone. Call them, e-mail them, speak to them in person, write a letter. There are many ways to communicate with a fellow human.
No one here would have the contact information for a random seller of an iPhone. -
I have a CC student membership for one year, but I can only download trial versions of for example illustrator and indesign (30 days). How do I solve this problem?
If there is no billing issue,
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If you use Photoshop at all, you may need to install the latest update to resolve this issue. See this blog post for more information:
http://blogs.adobe.com/crawlspace/2013/01/photoshop-13-0-413-1-2-updat es-now-available.html
If you do not have Photoshop, then try the solution that others have mentioned previously:
Open the Adobe Application Manager (AAM).
If applicable, let AAM complete any automatic updates and restart itself.
Sign in with your Adobe ID. (Optionally, you can close AAM at this point.)
Open a CS6 application (e.g. InDesign CC).
If prompted (e.g. you get the trial screen), click "License This Software" and sign in with your Adobe ID.
Refer to: Re: Top Ten Questions About Creative Cloud
creative cloud software says my free trial has expired, but I have a paid subscription
Regards
Rajshree -
i brought a macbook pro, but i can not use my apple id.because its already register onther account.i couldnt found that person.i want reset that account,can tell me how can i do this?
maxsurovi wrote:
i brought a macbook pro, but i can not use my apple id.because its already register onther account.i couldnt found that person.i want reset that account,can tell me how can i do this?
Restore the Mac to Factorty settings to make it Truly Yours.
Note:
This should have been done before you took possession...
Apple What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
Also See Thomas Reed's How to Prepare your Mac for sale -
When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA
You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
I have downloaded Peppa Pig series using Itunes and have tried to sync the tv programme to both my Ipad Mini and IPhone 5. However neither work saying that 'videos from Itunes Libary can not be copied to 'ipad' because they can not be played on this I Pad. I have downloaded the HD episodes is this my problem or do i need to download a 'video watching' app? Please help we are going away next week and the episodes were to help keep my toodler occupied on the plane. thank you
The error you received kinda looks like the one in this article: http://support.apple.com/kb/ts4223
But the iPhone 5 and the iPad mini should support HD videos.
What I would try is downloading the movies directly to your iPad mini or your iPhone. You will want to do this when connected to Wi-Fi, but you can follow these steps in this article: http://support.apple.com/kb/HT2519
I hope that helps! -
I recently made a video for my YouTube channel, but with this happening, I can't get videos out on time. I planned a video for today but it's been set back by a day. So, iCommunity, why is my video not showing in my pictures (where videos can go too) after a successful export? (It won't let me re-export it)
You really need to ask in the Elements forum (this is Photoshop)
Photoshop Elements
But I wonder if it is a similar situation to Photoshop CS2 which needs a special download now because the activation server no longer functions
Activation & Deactivation Help
Good luck -
Hi!
In the latests kernel upgrades (3 or 4 weeks) I lost my dvd burn capabilities...
it was working previously...
apparently dvd drive is detected properly, I can see dvd contents, etc... but brasero do not give me an option to burn on it (just shows .iso file)
that is happening in my desktop, and laptop too.... any idea?
Last edited by luuuciano (2009-12-14 16:09:05)yep, I tried wodim --scanbus with the same result (as root too)
here, the lshw output:
# lshw
azuloidesk
description: Desktop Computer
product: System Product Name
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=A0C9C96D-8DFE-D511-98A0-001D60839382
*-core
description: Motherboard
product: M2N-MX SE
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev x.xx
serial: MS6C79B33905155
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 0403 (08/20/2007)
size: 64KiB
capacity: 448KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu:0
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
vendor: Advanced Micro Devices [AMD]
physical id: 3
bus info: cpu@0
version: 15.3.2
serial: To Be Filled By O.E.M.
slot: CPU 1
size: 1GHz
capacity: 2600MHz
width: 64 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy cpufreq
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 1MiB
capacity: 2MiB
capabilities: pipeline-burst internal varies unified
*-memory:0
description: System Memory
physical id: 29
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-cpu:1
physical id: 4
bus info: cpu@1
version: 15.3.2
size: 1GHz
capacity: 1GHz
capabilities: cpufreq
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 1MiB
*-generic UNCLAIMED
physical id: 123
bus info: parisc@123
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: MCP61 LPC Bridge
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
resources: ioport:900(size=256)
*-serial
description: SMBus
product: MCP61 SMBus
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0
resources: irq:10 ioport:dc00(size=64) ioport:600(size=64) ioport:700(size=64)
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-usb:0
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:dffff000-dfffffff
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.31-ARCH ohci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=8 speed=12.0MB/s
*-usb
description: Keyboard
product: USB Keyboard
vendor: CHESEN
physical id: 4
bus info: usb@2:4
version: 1.10
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1.5MB/s
*-usb:1
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:21 memory:dfffec00-dfffecff
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.31-ARCH ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480.0MB/s
*-pci:0
description: PCI bridge
product: MCP61 PCI bridge
vendor: nVidia Corporation
physical id: 100
bus info: pci@0000:00:04.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
resources: ioport:e000(size=4096)
*-multimedia
description: Multimedia audio controller
product: SB Live! EMU10k1
vendor: Creative Labs
physical id: 6
bus info: pci@0000:01:06.0
version: 0a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=EMU10K1_Audigy latency=64 maxlatency=20 mingnt=2
resources: irq:19 ioport:ec00(size=32)
*-input
description: Input device controller
product: SB Live! Game Port
vendor: Creative Labs
physical id: 6.1
bus info: pci@0000:01:06.1
version: 0a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Emu10k1_gameport latency=64
resources: irq:0 ioport:e880(size=8)
*-multimedia
description: Audio device
product: MCP61 High Definition Audio
vendor: nVidia Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:dfff8000-dfffbfff
*-ide:0
description: IDE interface
product: MCP61 IDE
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-bridge
description: Ethernet interface
product: MCP61 Ethernet
vendor: nVidia Corporation
physical id: 7
bus info: pci@0000:00:07.0
logical name: eth0
version: a2
serial: 00:1d:60:83:93:82
size: 100000000
capacity: 1000000000
width: 32 bits
clock: 66MHz
capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.0.33 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100MB/s
resources: irq:27 memory:dfffd000-dfffdfff ioport:d480(size=8)
*-ide:1
description: IDE interface
product: MCP61 SATA Controller
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
logical name: scsi2
logical name: scsi3
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list emulated
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:23 ioport:d400(size=8) ioport:d080(size=4) ioport:d000(size=8) ioport:cc00(size=4) ioport:c880(size=16) memory:dfffc000-dfffcfff
*-disk:0
description: ATA Disk
product: ST380013AS
vendor: Seagate
physical id: 0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 3.18
serial: 3JVBP8E2
size: 74GiB (80GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=2d172d17
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: e4ab96d3-fb4d-4eb6-b1ab-3349147e44a3
size: 14GiB
capacity: 14GiB
capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2008-10-30 13:28:14 filesystem=ext3 modified=2009-11-24 14:14:40 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback mounted=2009-11-24 14:14:40 state=mounted
*-volume:1
description: Windows FAT volume
vendor: MSDOS5.0
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
logical name: /mnt/winxp
version: FAT32
serial: 2ce5-cee4
size: 5141MiB
capacity: 5145MiB
capabilities: primary bootable fat initialized
configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,relatime,fmask=0111,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,errors=remount-ro state=mounted
*-volume:2
description: Linux swap volume
physical id: 3
bus info: scsi@2:0.0.0,3
logical name: /dev/sda3
version: 1
serial: b5b78777-7852-4575-a8c2-7b8e57283778
size: 1027MiB
capacity: 1027MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@2:0.0.0,4
logical name: /dev/sda4
size: 53GiB
capacity: 53GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux filesystem partition
physical id: 5
logical name: /dev/sda5
logical name: /home
capacity: 53GiB
configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback state=mounted
*-disk:1
description: ATA Disk
product: WDC WD1600JS-55M
vendor: Western Digital
physical id: 1
bus info: scsi@3:0.0.0
logical name: /dev/sdb
version: 02.0
serial: WD-WMANM1362942
size: 149GiB (160GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=013e1410
*-volume
description: Windows NTFS volume
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sdb1
logical name: /mnt/enos2005
version: 3.1
serial: c8bfcbc3-28a7-5d4a-b1f4-ef372f1b6da6
size: 149GiB
capacity: 149GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2005-12-12 22:57:50 filesystem=ntfs label=ENOS2005 mount.fstype=fuseblk mount.options=rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 state=mounted
*-pci:1
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:24
*-pci:2
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:25
*-pci:3
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:26
*-display
description: VGA compatible controller
product: C61 [GeForce 6150SE nForce 430]
vendor: nVidia Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a2
width: 64 bits
clock: 66MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:22 memory:de000000-deffffff memory:c0000000-cfffffff(prefetchable) memory:dd000000-ddffffff memory:dffc0000-dffdffff(prefetchable)
*-pci:4
description: Host bridge
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k8temp
resources: irq:0
and, looking at that, the k8temp do not work properly, it shows an error at startup (that happened in the latests kernel upgrades too, I guess)
Currently I have this in my fstab (as it was working previously)
/dev/cdrom /media/cdrom auto iocharset=utf8,ro,user,noauto,unhide 0 0
/dev/cdrom1 /media/cdrom1 auto iocharset=utf8,ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
but I tried commenting those lines without not luck
Last edited by luuuciano (2009-11-24 21:34:49) -
Hi
-I have organized all my songs in iTunes ,deleted unwanted songs and updated the album artwork but it has not changed them in my iTunes media folder location in my C Drive.
How do I update it there so it is the same as my iTunes now so i can back it all up?
Thankyou.I solved my problem. Here's how:
1. Right click iTunes and click properties from the "Windows 8 Desktop" (or if you want to call it the 7 desktop thats fine too)
2. Select the compatibility tab.
3. Set compatibility mode to Windows 7 and click apply.
4. Open iTunes, sign into iTunes store, Turn on iTunes Match, Add your computer.
5. Close Program
6. Restart Computer -
I can not purchase music on iTunes and nothing has changed with my computer. I get an error saying "The network connection was reset. Could not purchase." I do have internet conncection. How can I fix this? I am able to do anything iTunes except purchase. The only thing done recently was update iPhone and sync the phone. Help please
Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
My husband and I share the itunes account. I just got an iMac. Everytime I send a message from my iMac, it appears to come from my husband's account phone number. Is there any way to fix this? Also, when I open iMessages, all the texts are from his phone (his text conversations).
Thank you so much for your help!
MyrnaTry This:
Open up the imessage app on your Imac. Once you have it opened go to top left corner of your screen next to the apple picture and the word MESSAGES appears. Click on it then click on preferences and uncheck your husbands phone and number and or any other numbers which are checked. I had same problem this fixed it. Also if you wanted to you can open up your own Apple account, but that's not really necessary. My wife and I both share the same as you do -
Editing GoPro videos with imovie on ipad air
Hello,
I'm new to this discussion board but I have a question. I recently bought a Gopro Hero 3+ and an ipad air. I have a 64gb Sdxc memory card for my gopro. So I already know that I have to convert the files from my gopro (which are Mp4 videos) to .mov files in order for them to come up in imovie. However, after I convert the video to .mov and put the video onto my ipad through Itunes, the video does not come up in imovie, the .mov video is only showing up on the Video app that is already installed on the ipad. Am I missing something? How do i get the .mov video to show up in imovie?
Thanks for your help.You can use the following formats in iMovie:
DV
DV Widescreen
HDV 1080i (25 and 30 fps)
HDV 720p (25 and 30 fps)
MPEG 4 Simple Profile
iSight
So, you may need to convert to mpeg 4 simple profile. -
I just moved all my itunes content to a windows 7 computer. I can only get "songs" in list view. Genre and Artist show as Album views. The box in preferences is checked so that all lists should show as list. How can I get a list view for Artists and Genre also?
Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox
Maybe you are looking for
-
SAP Script output not displayed
Hello, Print preview of purchase document does not show the output. Only "test print only" is displayed on all pages. I can see the data passed to SAP Script in debug. The print is created using output control, ( Save or create of PO ). What could be
-
Request IDoc : Application document not posted ERROR
Hi All, When I am executing Info Package in BW PROD the system is showing error Transfer (IDocs and TRFC): Errors occurred Request IDoc : Application document not posted I searched the forums but no such kind of error regarding this senario.This prob
-
Picture with dynamic size?
Hello, I post a Picture (OLE) on an CR Page. Depending on the parameters in the report, differnt pictures with different Sizes are selected. Now I want to fix the maximal hight and width of the space I reserve for the picture but keep the ratio betwe
-
How do i play my app games on my macbook?
I can't seem to activate any of my app games on my macbook. They show the icons but I can't activate??? Help!
-
Database connectivity toolset and nested transaction
Is it possible to make nested transactions with the Database Connectivity Toolset ? By nested transactions I mean that I want to open a transaction inside a transaction. I use LabVIEW 6.1 and Database Connectivity Toolset 1.1 Any ideas are welcome.