I enabled computer home sharing between my fiance's apple computer and my windows. I am able to play his music on my computer now, however I am making playlists for our wedding, and am unable to transfer any of his songs to my playlists.How can I do this?

I enabled computer home sharing between my fiance's apple computer and my windows computer, so I now can play his music on my computer; however, I am making playlists for our wedding and am unable to transfer any of his songs to my playlists. How can I do this?

Thanks
Are you sure that if I use my windows log in rather than my husbands, then open itunes it won't delete all his hundreds of songs and overwrite with mine? 
I want to maintain my own apple ID login and he wants his but without losing his songs.....
how do i transfer the content of my itunes including apps and songs to the new computer.  There doesn't seem to be an easy explanation on here. Do I just plug my iPhone in and it will all transfer?

Similar Messages

  • My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

    My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

    I Had it on my iPod, but I reset to factory settings and it got deleted :( If I find a way to get it back, I'll post it here so you can too.

  • Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work.

    Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT1689 I downloaded an album and on one of the songs it skips to the next song half way through the song... How can I fix this?

    I downloaded an album and on one of the songs it skips to the next song half way through the song... How can I fix this?

    Welcome to the Apple Community.
    Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
    If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

  • I want to name individual photos in the album but I am unable to select view sort in the drop down menu How can I overcome this?

    I want to name individual photos in the album but I am unable to select view>sort in the drop down menu How can I overcome this?

    Great to hear, but what was the solution?

  • I am running Windows 7 64Bit system and everything was working normal.  However, I am now getting an error message stating objc.dll is missing.  I've re-installed Itunes but to no avail.  How can I get this error message corrected?

    I am running Windows 7 64Bit system and everything was working normal.  However, I am now getting an error message stating objc.dll is missing.  I've re-installed Itunes but to no avail.  How can I get this error message corrected?

    See this User Tip by turingtest2
      https://discussions.apple.com/docs/DOC-6562

  • Adobe Reader won't install in any of the website-given ways. How can I fix this?

    I've been trying to install Adobe Reader 11.0 on my Windows 8 computer for about an hour now. When I download the regular installer, the first thing my PC does is give a security warning. Strange already, but the website mentioned this could happen, so I said "download anyway". Then when I execute the installler file, I get a small error window titled "Host" which tells me "the certificate could not be verified". The only thing I can do is press "OK", which makes it go away, but the installer still does nothing, of course.
    So I tried the other "direct" download which is given as a possible solution. The AdbeRdr11000 file I get from that downloads without any security issues.
    When I execute it, it asks me if I give this installer permission to run. I say "yes", the window dissapears and then nothing happens. At all. I can wait all I want, it's like I never clicked anything to begin with.
    So how can I fix this. I really feel like downloading such a widespread product shouldn't be so difficult.
    Any help would be greatly appreciated.

    When I follow your link, after filling out the information (operating system, language), I still can only choose for version 11,0.
    This is the same version the "direct" download gives me (the one that doesn't do anything after executing).

  • My ipod classic is connected to a new computer, but only sync 241 songs, out 1825.  How can I fix this?

    My ipod classic (80 GB, from 2006) is connected to a new computer, but only sync 241 songs, out 1825.  I have restored several times.  How can I fix this?  my old computer is damaged and the new one run on Windows 8.
    joseruiz1

    I ran into this same problem earlier with my new iPod classic 160 gb. Turns out it could be your files show in iTunes but they aren't connected to the location those music tracks are actually located.
    Does this make any sense?
    You basically have to make sure iTunes is picking your songs from the right music folder via your preferences.
    Option 1: If your iTunes is completely wiped blank and your music is stored in a safe place, backed up, etc. You can do the following:
    Step A. Preferences > iTunes Media Folder Location > choose folder
    **** please be sure to pick a location that is new or different from where you ACTUALLY stored your music to prevent your files from deleting itself as it updates****
    For example, if you stored your music on your Desktop then you wouldn't choose your music folder to be the one in Desktop. You choose the folder where you want your music to go such as C:\My Music or in Mac, you choose the music folder.
    Step B. Once you choose the folder where all your music is stored and you check the box that says "Keep iTunes Media Folder organized" and "Copy Files to iTunes Media when adding to library."
    Step C. This is the part that will make sense. Drag the folder on desktop that houses all your music into iTunes. Because you checked the box "Copy Files to iTunes Media when adding to library," iTunes will copy all the backup music you dragged into the folder location you designated it in "Preferences > iTunes Media Folder Location > choose folder."
    ---- once all that is done, your itunes will have ALL your music tracks linked to the right location on your computer and your iPod will sync with as many or all of the music you desire.
    Hope this helps.
    -Kayla

  • I recently changed my internet service provider and my e mail address. I updated my iTunes account with the new e mail. Now I cannot get updates on my devices, because the login box on each still contains my old e mail. How can I change this please?

    I recently changed my internet service provider and my e mail address. I updated my iTunes account with the new e mail. Now I cannot get updates on my devices, because the login box on each device still contains my old e mail, and I do not know how to change this How can I change this please?

    Try tapping on the id in Settings > iTunes & App Stores on your devices (Settings > Store if they aren't on iOS 6+) and then log back in and see if that 'refreshes' the account on them.

  • TS2621 I have my data retrieval se to manual. When I get mail I get a popup on the screen for each and every e-mail asking if I want to view it or cancel and I have to cancel each one before I can resume any other actions on my ipad. How can I turn this o

    I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?

    Try reset iPad (not Restore)
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I am making a playlist for a wedding and I need to shorten a song how do I do that?

    I am making a playlist on my iPod for a wedding but I need to shorten a song, how can I do that?

    Right-click the track in your iTunes library, Get Info, go to the Options tab, and set the Start and Stop times as you wish.

  • When trying to convert quicktime mpg video files to m4v I am unable to open them or lose the audio completely. How can I fix this?

    So I am in nursing school and am making a group project that involves interviews of current RN's. I've been tasked with putting the video together from all the clips, even though I don't really have any experience with iMovie or iMovieHD (both of which I have on my MacBookPro). One of the interviews was recorded on what I think must have been some kind of Sony camera (I can find out if this is important), but I got the files off of a flash drive that my group member gave me. The files all opened in quicktime with no problem with complete audio and video, but when I tried to open it in either iMovie or iMovieHD it stated it could not "parse" the file (in HD) or just simply did not open (in regular iMovie). I'll have to learn the program either way but have been messing around with iMovieHD more so I would prefer to use this if I can. How can I convert the MPG files to m4v and still retain the audio part of the video? I've tried loading it into iPhoto and they won't load. Any suggestions would be greatly appreciated since I'm running out of time to put this video together! Thanks!!
    -Grace

    Hi Grace,
    The free app MPEG Streamclip may be able to convert the file to a more suitable format. It can be downloaded from the developer's site here:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Here's a User Tip by AppleMan1958 that provides some more information about MPEG Streamclip (it's about importing homemade DVDs, but similar principles apply):
    https://discussions.apple.com/docs/DOC-3951
    John

  • I cannot email a link to any web page from Firefox 22. How can I fix this?

    I am unable to email a link to any webpage from Firefox 22. I have tried everything I can find to fix it. Nothing works.
    There is no longer the ability to right click and send an email link. The "Email link" in the "file" drop down on the menu bar doesn't work either. I even tried one add on program for emailing links. That didn't work.
    If I didn't lose all of my bookmarks, I would reset to the Firefox defaults. I have had to resort to using Chrome to send any links to webpages.
    There has to be some way to fix this. Please help if you can.
    Thanks

    Make sure that you have set a default mail program properly.
    See:
    *https://support.mozilla.org/kb/Changing+the+e-mail+program+used+by+Firefox

  • HT1430 Ipurchased a iphone 4s 8gb in jakarta. it was able to recognise only 2 network providers sim card (mentari & xl).it colud not recognise any other service provider sim cards. How can I use this GSM phone across other countries having different servi

    I purchsed an apple iphone 4s(8gb) GSM phone in jakarta from authorised apple store on 22/3/2014.The phone could recognise only 2 network service providers out of many that are available .Despite all efforts (approximately 6 hours) to make the phone recognise other sim cards,nothing could be done. The  reseller finally begged excuse and said that this phone was meant for use only in indonesia with only 2 service provide(xl & mentari).& with no other service providers at all. That sounds weird to me. At the end of the day, the reseller finally cancelled my transaction and i had to return back home sad &  empty  handed.
    Apple, do u have  any answer to this issue with your i phone 4s 8gb in Indonesia?
    Shakir Ali

    Hi there Shakir Ali,
    You may find the information in the articles below helpful.
    iPhone and iPad: Using cellular networks while in another country
    http://support.apple.com/kb/ht1807
    iPhone: About unlocking
    http://support.apple.com/kb/ht5014
    -Griff W. 

  • I have partially downloaded the new version of adobe flash player on mozilla through the plugin option. it wont let me open it or watch any videos until i download it completely. how can i fix this?

    i cant figure out how to download the application any other way. everytime i click on it in the downloads box it says application not found.

    Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
    Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
    I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
    This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
    Thanks fore responding to my question.
    DFelice

Maybe you are looking for

  • Error while using hr_organization_api.create_hr_organization

    Hi All, I am using following API for creating HR Organization in new implementation for Apps but everytime I run below code ,I get an error "ORA-20001: System Error: Procedure at Step 40" hr_organization_api.create_hr_organization (p_validate => FALS

  • Xml file from studio 2 to fcp 4.5

    Hi I have my son on the other side of the world to me just now, we shot a short film on DVCPRO 720/25p I loged on my mac and made a copy for him to take and edit, all good so far. The school has fcp 4.5 qt 7.6 (ithink) and of course he is working on

  • Creating Division in SD as part of Org. Structure

    How do we create divisions while preparing for having an org structure in SAP? I was able to create Sales Org and Distribution Channel, but I am not able to find the path in IMG for creating Divisions.

  • Insert into JComboBox....

    I am trying to insert another option into a JComboBox, however, I do not wish to append it. I need to insert it in between two other options. I cannot seem to find a method to do this. I know this is possible with JLists as you can specify an int and

  • BPC MS 7.0 Input template sends unchanged values

    Hello, We have created input templates in BPC MS 7.0 that retrieve sales and a driver from BPC and send a corresponding cos value back to the system. Col A and Col B are get only, and Col C is the input value (a formula).       Col A     Col B