I encounter a problem after upgraded latest software.

My numbers app cannot operating after I updated new software and iOS 7.0.4.

Hi Soren,
Sorry to hear that. Without specifics it's hard to help. Do you have your documents in iCloud and are syncing between iOS and the Mac?
SG

Similar Messages

Problem after downloading latest software update

Just downloaded the latest software update and it has totally fried my Z10. Can't turn it on, doesn't charge. Has anyone else had this problem?

Hi Agrajag17,
Welcome to the BlackBerry Support Community.
Was the software update interupted at all? Was it a wireless update and was your BlackBerry Z10 smartphone connected to a power source during the update?
Do you see an LED light when you connect it to a power source and try removing and reinserting the battery again?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Rington problems after upgrading device software

I just upgraded my 8230 with device software 4.6.1.284. When it came back on it did not show ringtones that I had downloaded in the list. They were still there but did not show up in the list. They had bee saved on a memory card. Now when I download a new one I have to do a battery pull to get it to show up in the list. Any ideas?

read your memory card using the following link.
use Windows Explorer, and display hidden & system files.
on the memory card, delete all the files named BBThumbs.dat . There should be one in every non-empty folder. then open the media application and let the indexation work.
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
HOWTO : use your blackberry as a USB device
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Anyone having problems getting CD covers to print after downloading latest software?

Anyone having problems getting CD covers to print after downloading latest software?

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Problem after upgrading yosemite 10.0.2 to 10.0.3

I have a Macbook pro 15,4 mid 2010 , CPU 2.53, Ram 8GB, VGA Intel 256, HDD SSD 240 OCZ Vertex 460.
After upgrading the software noticed that uses several processor without any reason the photo application thus raises the temperature and vation battery life ...... In general, the new photo application runs in the background without any particular reason, I wanted to know if I somehow disable it, because otherwise you get fired processor from ... temperature reaches 103 degrees Celsius
But I wonder why Apple has not predict ???
Should not inform us about whether there are such problems ??
thank you for your time

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.cloudphotosd
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. Log out or restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Problem after upgrading to ICS 4.0.4

i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
thanx for your help

Do you have many pictures?
Have your tried to reinstall the phone software using SUS to check if the problem remains?
http://www.sonymobile.com/gb/tools/update-service/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

IPhoto slideshow is very very very slow after the latest software update

As the subject states, iPhoto slideshows are very slow: after clicking on the slideshow-button first nothing happens, after a while the screen goes black (that lasts about a minute or so) and the (finally) the slideshow starts. which is very annoying because it displays no options screen at first as it used to do, it just starts using very annoying standard music... quitting slideshow again to go to the options menu takes ages!! this problem started after the latest software update... way to go Apple...
suggestions anyone?!

EelcoR
Welcome to the Apple Discussions.
Well I haven’t seen this problem.
Start with the troubleshooting basics:
1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
2. Repair Permissions using Disk Utility
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Massive battery drain issues after the latest software update - phone hot

After the latest software update (to the NI2 version) I have massive battery drain issues. The phone also stays hot. Even when I don't actively use the phone it seems to stay "awake" according to the stats. When I disable all data (Wifi and/or 3G/4G) it's perfectly fine. Does anyone else experience the same issues or has recommendations?

Is the device trying to sync all your photos with the cloud?
This is what I would do.
Back up your photos and music onto a personal computer. Copy down important settings like for your email, and contacts you can't risk losing.. even icon placement of important apps. Diagram it out.
Then perform a Factory reset on the device. Alternatively you might find the procedure for wiping the low level cache of the device posted in other posts on the site. That might fix the problem and avoid you losing settings and content on your device.
Extremely bizarre behavior post updates are usually associated with low level cache issues that cause the OS to behave poorly. Some people have reported their phones running hot and that could mean the radio is on constantly attempting to back stuff up to the cloud our restore stuff.
Good luck.

E75 problems after upgrade to version: 201.12.01.

I've noticed the following problems after the phone software upgrade to version: 201.12.01.
During the call, when I in move, for example, in car, and the phone switches between different base stations, the conversation breaks.
When I have poor network coverage, where the phone all the time looking for better coverage, in general conversation is impossible. After few words screen appears, "connection error".

After update to 201.12.01 version I have problems with Mail for Exchange. It can't download email message from Exchange 2003! We don't want to upgrade on Exchange 2007 version!
Error message is: "Security Policy that enables downloading HTML messages is disabled" (mayby sorry for wrong translate from Russian)
Message Edited by demonas on 08-Dec-2009 06:58 PM
Message Edited by demonas on 08-Dec-2009 06:58 PM

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password.
Any DEFAULT Password so that i can unlock the settings menu.

That's quite odd, just repeat the update process
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Encounter a problem during upgrade sap r/3 4.7 to ecc6

Hi expert:
i encounter a problem during upgrade sap r/3 4.7 to ecc6
in START_SHDI_FIRST step.
here is the error msg~
MSSCRESPDEFN.LOG
Msg 2812, Level 16, State 62, Server Jack, Line 6
Could not find stored procedure 'dbo.sap_upg_getrelease'.
setuser
i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
can any one tell me how to solve this problem?~
thanks.
Regards
Jack Lee

It's the kernel for the shadow the correct?.
Regards,
Alfredo.

I encounter a problem after upgraded latest software.

Similar Messages

Maybe you are looking for