I entered data for an address book I called: Wine Stompers and cannot seem to access it.
I have seen the name "Wine Stompers" fly by on the screen, but am unable to find the book. Can you Help, Please
Hi fco43051,
Where did you enter the data? Was is a download? Or was it an addon? With more information we can better assist you, thank you!
Similar Messages
-
Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.
In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM. -
Secure LDAP for GWIA Address book
I've setup the GWIA 7.0.3 May 2009 code set and configured for Secure LDAP.
I'm using the same *.b64 and *.key files we use for all our POA and MTAs.
I cannot get the Novell LDAP address book to connect to 636.
Is there a document I can use to help me figure this out.
I can revert to 389 but that port is not open through the firewall.
MikePOP and IMAP both work on secure port
>>>
From: jgrubbs<[email protected]>
To:novell.support.groupwise.7x.gwia
Date: 9/9/2009 6:36 PM
Subject: Re: Secure LDAP for GWIA Address book
Does POP3 work on the secure port?-- Jeff Grubbs
Novell Technical Support Engineer II
[email protected]-------------------------jgrubbs's Profile: http://forums.novell.com/member.php?userid=41638View this thread: http://forums.novell.com/showthread.php?t=385674 -
Please do not enter data for payment method Cheque papel error in IT0009
Hi Experts,
Whenever i try to maintain bank details infotype for payment type C(Check Papel),the system is throwing error "Please do not enter data for payment method Cheque papel". As per SAP std, I had deleted the entries for bank key, bank account and bank control key and maintained IBAN field in IT0009.While saving i am getting the error""Please do not enter data for payment method Cheque papel" and I couldn't save the record.
Then i deleted the entries for bank key, bank account and bank control key and IBAN field also in IT0009. While saving i am getting the error "Fill in all required entry fields". System behaves as if Iban a required field in IT0009. Our bank details infotype is country specific.We made it country
specific through feature P0009 and setting in table T588M.As per our conf setting IBAN field is optional. Even though IBAN field is optional, this field behaves as that of a mandatory field in IT0009.Iam facing this issues only for a few countries like Spain,Italy etc.For other counties i am able to change of create Bank details record for payment type C.
I have checked in Payment Methods by Country in FBZP (Payment Method Classification is set to Check and BANK DETAILS box is unchecked) but still no solution. Do i need to check in any other setting.
Please shed some light on this issue.Thanks in Advance.Hi Jobish,
It's weird but I tried the below method and it works
Here's what you can try in case you do not want to enter the bank details for payment method 'C'..
Tcode FBZP - > payment methods by country - > select payment method as 'C' and make below changes (make a note of these changes as you will have to undo them after saving the table):
a. Payment method by classification - select bank transfer
b. Reqd master record specifications - check the bank details options and select the options which you want to be entered (a/c no required, IBAN rqd, SWIFT code rqd)
Save the table.
PA30- > Edit any record once again and save it.
Again go to FBZP and undo the above changes, i.e, revert to the original entries and again save the table.
Try editing the record now in PA30 and it allows to save. This is the second weird workaround that I have come across and still not sure why
After above workaround, I didn't get any error while maintaining the record, for this or any pernr.
See if it works.
Regards
Neha -
How to populate date & time when user enter data for custom table in sm30
Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in AdvanceYou have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
IF l_total-vim_action = aendern OR
l_total-vim_action = neuer_eintrag.
MOVE-CORRESPONDING l_total TO s_record.
s_record-zz_user = sy-uname.
s_record-zz_date = sy-datum.
s_record-zz_time = sy-uzeit.
READ TABLE extract WITH KEY l_total.
IF sy-subrc EQ 0.
f_index = sy-tabix.
ELSE.
CLEAR f_index.
ENDIF.
MOVE-CORRESPONDING s_record TO l_total.
MODIFY total FROM l_total.
CHECK f_index GT 0.
MODIFY extract INDEX f_index FROM l_total.
ENDIF.
ENDLOOP.
ENDFORM. " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated. -
Looking for bright ideas for moving address book from MacBookPro that can't be upgraded from OS 10.5.8 (big bummer!) to iCloud and iPad2
Have you tried exporting the contacts from address book on your mac to your desktop and importing them into the iCloud contact file using the import command from the menu when you select the gear icon.
-
About warning "enter data for payroll past retroactive accounting"
Hi,
When I am entering master data, a message is coming
" enter data for payroll past retroactive accounting"
although i m not enteringh payoll data,
is there some date setting whcih needs to b doine to avoid that message?Hi
(Assuming that you have not resolved this.)
The message Enter data for payroll past (retroactive accounting) is generated because you are maintaining an infotype that has been flagged as payroll relevant and you are making a change to data that has an effective date before the last payroll run. Note that it is only a warning message so you can go past it.
Table V_T582A holds the settings that indicates whether the Infotype is Payroll relevant. Be very careful changing these settings make sure that the Master Data on the Infotype has no relevance for Payroll.
The Payroll Status (IT0003) Infotype for the employee holds the Last Accounted Date and the Retro Dates.
Hope that helps
Regards
Rob -
how do i erase a corrupt contact list from iCloud,iPhone, iPad and MacBook Pro and restore Address Book backup to all devices and cloud?
I saved a corrected, most up to date version of my master Address Book Contacts as a back-up on my Mac Book Pro.
then in an effort to "simplify my life" i attempted to sync my I phone contacts - ( pre clean-up version) with my clean list on Mac Book Pro, New I pad and newly available icloud. DUH!! Using iTunes to do the sync caused the clean MacBOOK Pro list to be commingled with the dirty iphone contacts. amd now the whole mess is in the cloud.
I need to clear out the contaminated lists from all iplaces, and startover with Back-up on my macbook pro. BUT HOW???
Help
KarenI had exported an address book backup: abbu
so since i wrote, i have found my way into the cloud: selected all entries - deleted them all from the cloud.
This wiped out contacts on my iphone and i pad, and MBP, as well as on the cloud. I then imported the abbu back into my now empty address book.
To repopulate the crowd, i selected all in my address book and created a single card vCard for export to my desktop. I then dragged that vcard into my empty cloud. Now my cloud has the same clean contacts as my MBP addressbook. The cloud then pushed the clean contacts into my empty ipad and iphone contacts.
I had to go back to Address Book>preferences>Accounts and Add an I cloud account - but if you accidentally create a second i cloud account - all of a sudden your address book will duplicate itself. I quickly reversed it by deleting one of the icloud accounts in my Address Book>preferences>Accounts.
I created a new entry on my MBP and it is now on all devices and in cloud
I also created a new entry on my iPhone and it is now in the address book on my MBP.
I feel empowered!!
Have i missed anything?? -
When I purchased my iphone 4S, I had all my old phone's information transfer over to my new phone.
I organized my address book on my mac powerbook and then hoped to sync my computer's address book to my phone - in hopes of erasing all the junky contacts on my iphone and only having the my address book contacts on my phone.
I did all I could trying to make this happen (through iTunes) but it hasn't erased/replaced all of the contacts on my phone - I believe since my phone is synced to icloud. So I'm stuck with a very unorgaized contacts list on my phone...
How can I make it so I only have the contacts from my address book on my phone?
Thanks in advance,
SuzanneAlso, I just noticed that syncing my phone effected my calendar in that all my events now repeat. So instead of having one event schedule on a day, I have two of the same events scheduled for the same time.
It seems as if I can't sync my phone to my computer through iTunes and iCloud.
Help???
Suzanne -
One of my 2 address books can no longer be viewed, how do I access it?
''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1051908 /questions/1051908]''
one of my 2 address books can no longer be viewed, how do I access it? It disappeared within the last few days. I can still find addresses that are in the 2nd address book, but I cannot view it, so only 1/8 of my addresses are now viewable. How do I access the 2nd address book?Hi ronc2, there isn't a specific setting for this. Firefox's built-in JavaScript settings allow you to control several aspects of scripts*, but unfortunately not this one.
I previously tried to find some other options for individually turning off this event, but I couldn't find a way. Someone might be able to create an add-on to solve this problem, but it will take someone cleverer than I.
Extensions that disable scripts on a site-specific basis:
* If you regularly visit some sites which do this, you can block JavaScript on that specific site using the YesScript extension. Unfortunately, other script-based functionality will be blocked as well.
* YesScript does not preemptively block scripts on every site. If you have to visit a lot of random sites and want to take a paranoid approach of having scripting blocked until you see as much of the site as you can see without running scripts, then the NoScript extension would be for you. But even then it's "all or nothing".
''* These include: JavaScript enabled yes/no, override right-click menu yes/no, change order of windows yes/no, move and resize windows yes/no, close windows yes/no, specific features of pop-up windows, change images yes/no, detect copy/cut/paste and modify selection yes/no.'' -
How do I move/copy contacts from Entourage to iCloud Address Book without creating duplicates? Address Book on Mac, iCloud, iPhone and iPad is now empty
Thank you for letting me know!
Going to give it a go. Had a back up of all my clients files stupidly not my software as I have the originals disks. Just realised that amongst the software is ibiz and have lost al my accounting and billing files for the last 7 years want to cry so losing my contacts now will really tip me over the edge!
Fingerscrossed this works! -
I have a Mac 10.5.8 op system. My Contacts do not syn with I cloud. Trying to get my address book complete on both systems and now I have lots of duplicates on I cloud adress book. How do I efficiently merge the duplictes that are now on I cloud?
You cannot use iCloud with Leopard 10.5.8. The minimum requirement is Lion 10.7.2. If you have been syncing your contacts with iCloud you can only have been doing it by some sort of unsupported hack, and if it doesn't work it's unlikely to be possible to find an explanation. If you have been using other (compliant) devices by trying to sync using both iTunes and iCloud you are likely to get duplicates.
A computer old enough running Leopard may well not be upgradeable to Lion or Mountain Lion, but if you can do so this is the only way you are going to be able to make proper use of iCloud.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table -
How to sync Address book with iphone(iOS 6) and 10.7.4?
How to sync Address book with iphone(iOS 6) and 10.7.4
i'm having this issue too. it's a bit more complex though i think so i'll give the details:
a few days ago i added some people to my contacts using my phone. the thing they have in common is they're all new contacts.
they synced over to my macbook address book ok.
then a few days later i had to do a full restore of my iphone for various reasons (the new one, already!) which i did. when i then looked in my iphone contacts, these contacts were no longer there. they WERE however, still in my macbook address book.
so i figured i'd switch icloud syncing off for contacts and then resync to get them back on my phone. it didn't work. so i then turned off icloud sync and tried a good old manual sync via itunes, making sure to check the box for syncing contacts. it still didn't work.
now i'm at that odd place where the contacts are in my macbook address book but not in my phone and i can't seem to get them onto my phone (which is frustrating as ultimately they are phone numbers and in my phone is the best place for them!)
any ideas? -
Why does my iPhone automatically enter my entire email address when I simply type "gmail" and how to I turn it off? It also does it whenever I type it in Safari (but not Chrome) and it only does it with one of my email addresses and not any of my other ones (i.e., yahoo, hotmail, etc.).
Thanks so much for your help!I don't see visible underscores in that login form, but they appear to be entered (that form isn't high enough to show them for me).
You can verify that in the Scratchpad and use Execute > Display after pasting the below posted code.
* Firefox/Tools > Web Developer > Scratchpad (Shift+F4)
<pre><nowiki>document.getElementById("userid").value;</nowiki></pre> -
When I hit send/receive on a few clients the process will hang on "Offline address book Connecting to Microsoft Exchange" and will never finish? These same user can long on the OWA and send/receive just fine. The problem is that while it's hanging it can't go out and look for new email. Any thoughts?
I had similar problem.
This actually arose due to the fact I had mistakenly set the Default web Site directory with a HTTP redirect which applied to all subfolders including OAB.
I did then rectify this by going into individual subfolders and unchecking Http Redirect from each sub folder, however unknowingly it created/modified a webconfig file under the OAB virtual directory. (you can explore it to see the
file there)
If you test your OAB url (for people with the issue), which is : http(s)://servername/oab/[code]/oab.xml you will get Error 500.
Each time Outlook 2007 was trying to connect to get OAB, it was trying to read that webconfig file.
I fixed this by changing the permissions on that webconfig file to allow everyone and the above error was done, and also my Outlook 2007 was downloading the OAB again!
Now if the above fix did not fix your problem, you can temporarily effectively disable OAB by unticking Web Distribution of OAB and Public Folder Distribution in EMC under Organisation/Mailbox/Offline Address Book. Users will be able to do a
send/reiceve without any errors/issues. However, if a new contact/user is added to your AD with exchange attributes, the clients will not be able to see this. I'm guessing if cached mode was also not used, issues would also occur if they tried using the GAL.
acidack, you are a lifesaver.
I looked at the other webconfig files in the internet directories and noticed they all had 'Authenticated Users' with read permissions while the OAB one did not. Adding this group with read permissions solved the problem; Outlook 2007
users are no longer frozen on the 'Offline address book connecting to Microsoft Exchange" message.
What caused this? I'm not sure. I was messing with the web settings trying to redirect people to OWA. Something I did must have caused this file to be re-created without the needed permissions.
Acidack and AndrewB, You are both live savers. After all these years, your solution to this problem is still spot on.
Maybe you are looking for
-
Mail rules sending mail to wrong folder
I'm downloading all my multi-account Gmail (thousands) into Mail app with rules set up to reroute gmails into their proper account inboxes/sent folders/etc. However, Mail seems to be ignoring everything I want it to do and moves ALL mail into Account
-
I have the CC Master Collection, I am experiencing bugs in Illustrator version 18.1.0. It appears I do not have Illustrator CC2014.1 (can't tell since you don't list the version number anywhere!), but I can't seem to download it. I go to the download
-
Hi All. Any idea's on the following requirement. Actually, we need to send quarter data to the user in FIGL data, Below are the fields, Company code, Doc Number, Doc Type, Created on, Posting date, Ledger, Cost center, Item text. For these fields w
-
I'm a new Mac user, and I'm trying to get into the Apple way of doing things! One of the hurdles that I need to overcome is with iChat; I've been trying to get onto iChat from Dubai without success. I'm connecting to the internet via Etisalat's broad
-
Hi Experts, i have one requirement in S&D report for customer ID we need the outstanding last 60days, can any one help me how i will get that customer outstanding.