I entered text on to my background layer and now I can not edit it.  Is there any way to edit this?

Please help! I am trying to make a Christian calendar and entered text on to my background layer and can not edit this. I have tried to duplicate the background layer so it is not locked but I still can not edit this text.  Does anyone have any suggestions?

The text should be on its own layer. If so, you can delete the layer and start over.
If you have flattened the image layers, open the undo history palette, and go back to the state prior to flattening.
If you saved the original file as .PSD, then the layer structure should remain intact for further refinement in a subsequent session.

Similar Messages

  • I bought my iPhone 4 in Hong Kong and I am in Vancouver right now. When I enter the sim card, it locked my iPhone. Is there any way to solve this? Thank you

    I bought my iPhone 4 in Hong Kong and I am in Vancouver right now. When I enter the sim card, it locked my iPhone. Is there any way to solve this? Thank you

    Inserting a SIM card does not lock a phone.
    If the device is carrier locked, the only way to unlock it is to contact the carrier to whom it is locked.

  • At times, the type in the bookmarks toolbar as well as the tabs changes to white with a drop shadow on a white background, making it very difficult to read. I do not know what it causing the colors to change. Is there any way to fix this?

    At times, the type in the bookmarks toolbar as well as the tabs changes to white with a drop shadow on a white background, making it very difficult to read. I do not know what it causing the colors to change. Is there any way to fix this?

    quick test based on screendump from your picture
    1: hue & saturation : master sat -100
    2:levels : input white=67
    OK ?

  • I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

    I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

    Your only recourse is to force it into DFU mode:
    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

  • When I send a group text, every response I get is also sent to the entire group. Is there a way to fix this?

    There is a weird thing going on with my group text messages; at least I think it's weird. I was recently arranging a party, and sent a group text out to all of my friends from my iPhone 4s. When people responded to me about their availability, everyone on my initial list also got that response. The responder assumed they were only texting me, so they had no idea they were texting everyone! Luckily, nobody sent a reply like, "I won't come because that fat cow Josie is going to be there," but they could have.
    Is there any way to make it so when people respond to me it is not a reply all?
    Thanks,
    Michael

    Hey Grupo Castillo,
    Thanks for the question. You can actually configure this behavior from Mail preferences:
    1. Choose Preferences from the Mail menu.
    2. Click Composing.
    3. Deselect the checkbox for "When sending to a group, show all member addresses".
    When you send an email to the group, only the groups name will be seen.
    Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
    http://support.apple.com/kb/TA21082
    Thanks,
    Matt M.

  • I use preview's annotate feature to take notes by making text boxes in a PDF file. When I open the notes up again to review, all the text boxes have been rotated 90 degrees. Is there any way to prevent this from happening?

    If I click the boxes twice they rotate back but this is very annoying and time consuming.

    Just checking...still no fix for this? I upgraded to OSX 10.8.4 recently and started using Preview to annotate lecture notes, only to find text boxes rotated later on. Appears to be okay if I go back and click on all text boxes and save again.
    Any new updates on this topic re: why this is occuring and how to permanently fix it?

  • In the iOS 5.1 there's a handy feature to take pictures without giving your enter-code first. But this also enables unwanted users to enter the phone without the code. Is there any way to avoid this? Geert

    Thnx for replying

    If your enter code is enabled you only have access to the camera, not even your camera roll.

  • Annoying bar on the right side of my browser, makes the text and resolution of things inside the browser look blurry, is there any way to fix this?

    There's been this white, or transparent bar on the right side of the browser (picture for reference: http://imgur.com/Jhzn9ym )
    That annoying bar makes the whole browser become blurry in resolution and it even affects how I click on links, for example lets say I click on link, the browser will think im just highlighting text and make me click about half an inch to the right in order to click the link I want. I guess the transparent bar throws off the browser as if that bar isn't there but yet the browser has adjusted to fit the faulty resolution. I know about computers and I'm not a stay at home mom that has no idea how to fix things, if you notice the image the browser is fully opened, as in the button that has the square to make the browser fit the window is clicked, so the browser is set to fit. This is really annoying because it just throws off the way I use it and the functionality is not there any more.

    If the Firefox window isn't maximized can you then drag te windows borders to make it fill the full screen width?
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    *Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Is there any way to edit the pdf text field design?

    I dont want a black frame around text frames when a form is printed...
    In Livecycle you could define various properties (like sunken box etc.), but not in FormsCentral?

    If you have Acrobat Pro you can edit a pdf form file to have the various field border properties that you describe.  You would create the form in FormsCentral and save as PDF.  Then you would do a Save a Copy on the form.  Open the copy and select Tools->Form->Edit.  You can then select the fields and set the border in the Properties dialog in the appearance tab.  Once you have the form looking the way you want you would then re-import the copy into FormsCentral and send the file out to the world.

  • Had installed cs4 trial version, then tried to enter serial number, but it was invalid and now I can't seem to reinstall the trial version as I had been using, as it comes up serial number invalid even though I am just asking for a trial basis of 30 days.

    does anyone know what to do next so I can continue to use the trial versions of cs4. It appears as I have been kicked out for good because I entered the serial number wrong. Spoke to a rep and they said this was not available to purchase online, as it is an older version, but I need the old version to use the halftone option they have on cs4. sure would appreciate some advice, thanks to anyone who might have the answer.

    If the trial version is indicating it is no longer available and you need to enter the serial number to activate it then that is the end of the trial version for that machine.  If you have another machine then that will be one way of getting the trial version running for another trial period.

  • I transferred all my Itunes music from an old PC to my new one with Windows 7.  Now I cannot edit "artist" or anything else for the songs.  It is all greyed out and I cannot enter information. Is there any way to correct this problem?

    I transferred all of my music from an older PC to my new one with Windows 7.  Now I cannot edit selected songs.  The information is greyed out and I can't type over it (on all my music except NEW downloads).  Can anyone help?  I even have a few songs with NO artist tag and I can't write anything in them either.

    It's a permissions problem. Try this: right click on your iTunes icon and choose "run as administrator" that might fix it.

  • My daughter cant remember her password she entered in her i pod touch. Is there any way to fix this?

    My daughter put a password on her i pod touch and now she can't remember what it is, is there any way to fix this??

    http://support.apple.com/kb/ht1212
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My location bar autocompletes, replacing the already-typed text with the first few letters of the "switch to tab" URL; is there any way to change this?

    If I have a mozilla.com window open and I try to type "mouse" to automatically search through my bookmarks and history for something on about mice, for example, the location bar changes the "mo" to "ht", due to the autocomplete replacing what I was typing with the URL of the mozilla.com tab, which starts with http://.
    This is really annoying... since if I continue typing the word "mouse" it replaces it with "htuse". Which is useless to me, trying to search for mice.
    Any way to fix this?

    There is a way that you can do this, but it does mean abandoning CNAME forwarding that you have already set up and just using ordinary masked web forwarding. In this way you can go to the web forwarding section at your domain name registrar and forward your domain name to web.me.com/username/sitename. This will re-direct your site in the way that you want, but because it is masked web forwarding, just your domain name will show as the url for every single page, so you cannot bookmark single pages of a site, just the whole site.
    If you use an iWeb blog and you mess around with moving the pages around in your iDisk, then you will loose MobileMe features such as the ability to post comments and also as you have already found, when you publish from within iWeb, it automatically publishes to the same place on your iDisk and not where you have moved your site to.
    If I were you I would set up an individual blog with WordPress or Blogger or something similar - if you have an ordinary web host you can upload WordPress there and this then has the advantage of you being able to use your domain name followed by blog or whatever. It is a lot simpler than fiddling around with the iWeb blogging system - I have a blog on my own site and I use WordPress. My site was designed using iWeb and I just create a link from my site to my blog at WordPress - couldn't be simpler really.

  • HT1688 i have a I phone 3gs , I unfortunally on my home wifi selected forget a network and now i can not get back on my home wifi even after entering the password. how do I correct this

    I have a I Phone 3gs, I unfortunately on my home wifi selected forget a network and now I can not access my home network even when I reenter my password how do i correct this?

    Hi shelly92555,
    I apologize, I'm a bit unclear on your current situation. If you are saying that you are unable to unlock the original iPhone due to a passcode issue, you may find the following article helpful:
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Regards,
    - Brenden

  • Is there any way to edit a keyword already entered

    Lets say I accidentally spelled a keyword two ways, but I wanted to convert all instances of version a to version b, so I eliminate a and keep b.  Or I just changed my mind about a keyword and want to change it wherever I have used it.  But I have applied these keywords to multiple images in multiple folders. 
    Is there any way to do this other than eliminating all of either a or b and re-applying one by one?  This would be extremely tedious; nigh impossible. 
    I used Bridge for a while previously and am gearing up to try to tag all  my photos, and as I recall this was a major problem for me.  

    You can search for the incorrect keyword, find and change, but as you admited it is a slow process.
    I would like to disagree with this
    You can use the find command for both keywords with Source set to main folder including subfolders and non indexed files. Use the plus sign to add the second keyword and this should provide you the files with both keywords in the content window (it may take a while depending on amount of files and folders and if your files have been indexed before or not)
    When the result s there use the filter panel to sort only files with the first wrong keyword, select all files and then change the keyword. You can do so in the keyword field of the metadata tab but better would be to use the keyword panel. First add the new correct keyword to the list and then select the wrong keyword and click on the checkmark to remove the keyword from the selected files.
    Then with right mouse click menu delete the first wrong keyword from the list and click on the correct keyword you want to add to the already selected files.
    Repeat this for the files with the other wrong keyword and you are done

Maybe you are looking for