I erase my data inside iphone in 3gs after that screen not open

I erase and restore the data inside my Iphone 3gs and it show atleast 2 hours to reboot by themself i waited it erase and finally it cant able to reboot. The symbol from able is always showing and my iphone can able to open front screen. i think the soft ware was corrupted

You may try resetting the phone. Hold down the sleep/wake button and home button wait until you see an apple logo then release and after a couple of seconds your iPhone's home screen should comes up

Similar Messages

I erase all my iphone 5 setting after that could not activate iphone why

i erase all my iphone 5 setting after that could not activate iphone why

I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

Error while syncing can not be erased and have gone to all articles and nothing has worked. Have tried to erase my data in the sync file and that can not be done - it says try again another time. What now?

Have gone into my snyc data file to erase all data - error says that it can not be done at this time. I still have the error while syncing on my bar. Have tried to get a new sync number and that will not change - it goes back to the original how can I start over and try again?

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

During erase all data i have unplugged usb. after that i could not open OS-3.2

Hello:
I am an apple new user. I am using ipad (Wifi+3G) and last night i intended to upgrade my ios from 3.2 to 4.3.3 version. I have plugged ipad with my laptop and before upgrading i tried to erase all data. I putted command and it started erasing data. During the process i intended to unplug usb. However, afterwards my pad is showing nothing but apple logo with busy sign.
1. Now what shall i do? to go back my 3.2 version?
2. Its not responding even after connecting (using usb) itunes. What will be my next steps using ipad again?
Please help me out. Faridul

Ok i have it figured out. its simple and straight forward. clone (carbon copy cloner) the main drive to an external drive. Set the two drives as a stiped 0 raid. Then clone the external back. Let Time Machine do backups. Set back and let her fly.

When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect.

When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect on the phantom playlist that shows up on the PC when I plug in the iPhone to the PC. I cannot manually move songs or playlists from the PC to the iPhone
Help greatly appreciated.

Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way?

How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way? Thanks.

You put the internal drive in an enclosure. If you choose to keep the drive, you don't need to erase it.
(110687)

My iPhone 3gs after restoration is not being activated ... can you help?

my iPhone 3gs after restoration is not being activated ... can you help?

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

When I connect my iphone to my iMac, iTunes does not open automatically

When I connect my iphone to my iMac, iTunes does not open automatically, even though I have the "open iTunes when this phone is connected" option checked. I'm on the latest Snow Leopard with iTunes 10.4 and use an iPhone 4 with iOS 4.3.4. I think the problem began with the latest iTunes update.

Found the answer in another discussion! Here's what worked:
"I also had the same problem, iTunes 10.4 wouldn't launch when connecting iPhone 3GS.
I unchecked "Launch iTunes when this iPhone is connected", restarted, launched iTunes and connected iPhone, rechecked "Launch iTunes when this iPhone is connected". I was asked if I wanted to install iTunes helper and said yes. All works again."

Using Outlook 2007 I want to receive emails on my iPhone 4 only when Outlook is NOT open on my computer, as when away from home or want to quickly check email when computer is not turned on. Either ALL emails come to my iPhone or none at all.

Using Outlook 2007 I want to receive emails on my iPhone 4 only when Outlook is NOT open on my computer, as when away from home or want to quickly check email when computer is not turned on. Either ALL emails come to my iPhone or none at all. Is the setting I need to change in Outlook or on the iPhone or is it somewhere else? I used to have this setting but transferring Outlook to a new laptop somehow turned it off.

No. You really can't do that. Not easily at any rate. You would have to set them both up to use POP3, but even then there is no way to guarantee that the phone won't poll the server prior to your computer doing so, pulling down the message from the server.

My Iphone 3s is stuck and will not open, I have an image of a USB cord with an arrow pointing up to the Itune music Icon and my phone won't open or be recognized by itunes or my computer.

My Iphone 3s is stuck and will not open, I have an image of a USB cord with an arrow pointing up to the Itune music Icon and my phone won't open or be recognized by itunes or my computer. What do I do now?

Try restoring it using Recovery Mode.

My Applications, Mail, Contacts, Calendars, Reminders, Safari, Notes, Documents, & Data, Find My iPad, Because of Inactivity iCloud not open.

My Applications, Mail, Contacts, Calendars, Reminders, Safari, Notes, Documents, & Data, Find My iPad, Because of Inactivity iCloud not open.
Habibullah Allah Yar
<Personal Information Edited by Host>

These are user-to-user forums, you are not talking to Apple here, so I've asked the hosts to remove your email address, postal addresses and phone numbers from your post.
I'm not entirely sure what you are saying, but if those apps are crashing then have you tried toggling them 'off' and 'on' via Settings > iCloud ? And if that doesn't fix it then try closing them via the iPad's taskbar : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
You could also try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If it's a different problem ... ?

I have restored my iphone but camera shutter still will not open/work, i have restored my iphone but camera shutter still will not open/work

I have restored my iphone but camera shutter still will not open/work

Try closing the Camera app completely and see if then works when you re-open it : from the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

My sim got stuck in Iphone 4 S, Sim case is not opening it got stuck

my sim got stuck in Iphone 4 S, Sim case is not opening it got stuck

Hi Mehrabi,
Thanks for using Apple Support Communities. This article has steps you can take when you're not able to update, including what to do if your device isn't recognized by iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari

Hello! i am new to Macbook pro, i have recently transferred my data from my Pc to Mac, i can not open .exe file. Please give me any suggestion regarding this!

hello! i am new to Macbook pro, i have recently transferred my data from my Pc to Mac, i can not open .exe file. Please give me any suggestion regarding this!
I have using Mac OS 10.9.2

Try running it through WineSkin or CrossOver Mac, or installing Windows through VirtualBox, Parallels Desktop, VMware Fusion, Boot Camp, or similar software.
(106527)

My iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button

my iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button,

Hello arlyn-cavite,
If the screen is not showing anyting when you press any of the buttons you may want to try these steps.
From article iPhone: Hardware troubleshooting http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Take care,
Sterling

I erase my data inside iphone in 3gs after that screen not open

Similar Messages

Maybe you are looking for