I erased everything as in EVERYTHING, no software, completely. How do I install the OS software 10.7?

I erased everything on my computer hoping to start from scratch... I went too far.  Now I can't install 10.7 nor 10.6.  Background...  I received my Mac Mini from my son and want to put in my admin information on it.  Whenever I start it, it always go to the Disk Utility.   Even holding the option key...  There's no disk to boot from. I hit the recovery disk.... Nothing.  I've tried to reinstall 10.7 from the menu... Nothing.  I even purchased 10.7 and the code.   I even purchased the 10.6.3 install dvd... Nothing, it just keeps spitting it back out. My Mac mini is the early 2007 model,  so the highest OS is 10.7.  Please help or just te

Thank you for replying.  Nothing as in when the computer tries to install Lion from the internet it says 'not available at this time' or something along those lines.
How would I reboot to recovery partition?  When I click on the Recovery disk, it states it is unable to.
I do not have an external drive.
I do have an other Mac, but it's ancient... it is 2003 17" iMac with no Intel and the highest OS it has is 10.5.8.  It does have a Firewire, but in the article you stated, it said I needed to have 10.8 or higher as the host computer. :-(  I also tried to put the System on USB from the iMac and then try to install in the Mini... nothing.  But at the same token... I'm not 100% sure on everything I am doing.  LOL!
If there is some way for me to start completely over from scratch and install an OS X in there, I am willing to do that.  But I need step by step instructions... when I say step by step, pretend I don't know anything about computers.  I have had Macs for many of years (20+ years), but have never had to go inside of it.
I also forgot to mention...  before I erased EVERYTHING, I tried, okay I did go in to the root screen to try to copy what someone had posted to start for the install screen...  that's when everything went wrong.  I know...  I should never go in there.  Any help and input is greatly appreciated.  Thank you again!!!!

Similar Messages

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • How do i install the old software on my mac

    how do i install the old software on my mac, i hate Yosemite

    Please explain me as in what kind of old software do you intend to install on your macbook pro.
    -    Please tell what OS X do you wish to run on your macbook, as you said you hate Yosemite.......??
    -    Do you wish to do a clean install of your favoured OS X and later reinstall your old software...??
    -    Also, do you want to restore the entire system files means the OS X along with the old software or just want to re install your old software on the existing OS X ...??
    Be precise.....

  • HT5567 How I can install the new software 6.0.1 in my Iphone

    How I can install the new software 6.0.1 in my Iphone 4

    Open iTunes on your computer.  It should prompt you with the info that there is a new operating system available.  The safest way to go, is to download only.  Then when you are ready to let your phone sit for a while, choose to update it.

  • How I can install the downloaded software to my PC

    hi, somebody knows how I can install the software downloaded from apple to my windows PC???

    You can't. ViddyUp is for OS X only. It doesn't operate under Windows. Look at the System requirements here: http://www.splasm.com/viddyup/index.html
    For the other software I don't know, look at the sytem requirements and choose to download accordingly.

  • How do i install the osx software onto my new hard drive?

    I have just recently replaced my hard drive due to a fault from the previous one. how do i install my software without a cd? Everything is done by internet cd's just dont exist anymore. What are my options?

    I don't know if this will work or not, but if your machine shipped with Lion, try booting while holding down the Command, Option and R keys. You may be able to format your drive and then reinstall Lion on it.
    It may work - it might not; give it a try.
    Clinton

  • I have accepted team member invation   How do I install the adobe software?

    I have accepted a team member ship invitation.  Now how do I now install the software that we purchased.  everything I see looks like a sales pitch?
    thanks
    Bill

    Hi,
    It can be because either the invitation has not been accepted successfully or else it can be an activation error.
    Activation error: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    Regards,
    Sheena

  • How can i install the updated software when my pho...

    I am using nokia 206 dual sim. Today i find software update info and i download the updates but after download when i want to install in it need 5mb free memory .while my phone sun with 10mb and i have not keep any data in my phone. How can i install it. I aslo reboot my phone twice today.

    For this problem, i suggest you to visit nearest Nokia care center and upgrad your firmware. Firmware upgrad is free of cost from Nokia in warranty period.
    Hope it help for you.

  • How do I install the ScanSnap software on my new iMac / Mountain Lion?

    I have been everywhere trying to figure this out.  Fujitu's site tells me to simply update the software already installed.  Problem is that it's not already installed.  I don't have a disk drive and so I cannot install with the disk.  I downloaded v3.2 (which seems to be the software itself) from the Fujitsu site but when I double click to install I get a small box indicating 'The following disk images cannot be opened' and underneath it leasts the ScanSnap.dmg with a reason of 'not recognized'.   I know this is a popular scanner (I have the S1300) and so I am hoping someone has faced this and figured it out.  Fujitsu's site is rather confusing on the topic.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I recently was given a new computer and my plan was to re-install Elements 12 on to it.  However it won't allow me to do it as it says I have already used that disk on previous computer. How do I install the Elements software on my new computer?

    How do I re-install my Elements 12 software on my new computer?
    Ron S
    Wasaga Beach, On

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Getting Refunds for your iTunes Store Purchases
    http://www.labnol.org/software/itunes-app-store-refunds/13838/
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
     Cheers, Tom

  • HELP - How do I install the iTunes software for 2 ipods on the same PC-XP?

    I bought 1 ipod and 1 ipodnano and have had very difficult time in getting the itunes to recognize 2 serial #. I want to install 2 versions of itunes on different directories but DON'T KNOW HOW TO SET THE OPTION.
    Please help!

    pdt,
    Have a look at: http://docs.info.apple.com/article.html?artnum=300432
    Let us know if that brings you anything in the way of satisfaction.

  • We do not have a dvd drive. how do we install the photoshop software?

    I would like to install but do not have a dvd drive. how do we that?

    There is no macbook of any vintage that doesn't have a dvd drive if it has any kind of optical drive, but you can always install the trial and enter your serial number into that. You will lose the special link to uploading to costco if you do it that way, though.
    What makes you think your mac can't read a dvd?

  • How do I download the new software for my macbook pro (I currently have the 10.5.8 software) when it doesn't come up in software updates in my system preferences?

    I just bought a new iphone 5 and when i plugged my phone it to the computer it told me i needed the new itunes so i downloaded it and then the new itunes wouldn't open without the software 10.6.8 or later. I have the 10.5.8 software. How do I downlowd the new software. It doesn't come up on software updates either.

    Welcome to the Apple Support Communities
    An iPhone 5 needs iTunes 11, and iTunes 11 requires Mac OS X 10.6.8 or later, so upgrading to Snow Leopard will work.
    First, check if your Mac is supported > http://support.apple.com/kb/sp575 If it's supported, buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Then, you have to make a Time Machine backup and/or a clone with Carbon Copy Cloner onto an external disk. After that, you can upgrade to Snow Leopard, so insert the DVD and upgrade.
    The DVD will install Mac OS X 10.6.3, so open  > Software Update and install 10.6.8. You may need to run Software Update again in order to install iTunes 11

  • How do i install the old ipod software...

    how do i install the old software yhe 3-23-06 software...
    pleez help im getting frustrated...

    I have an IPOD Suffle. I have spent hours and have yet to sucessfully install the software. At first it was partially installed. I had a friend completely remove it and tried to install it again.I disabled my virus protection and removed Quicktime. I continue to get error # OX80040707. I called Dell and they say it's not them. I own stock in Apple and am now considering selling it.
    Help!!!

  • How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

    Hi mujabee1111,
    Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
    Download CS5 products
    Regards,
    Sheena

Maybe you are looking for

  • Menubuilder links no longer working

    I am using Menubuilder in Captivate 3... I have created some menus and published the HTML option. These links do not work, about a week or so ago these links did work in Firefox and not IE now they don't work in anything.

  • ITunes won't open the library I backed up to my ext. HDD?

    I recently reformatted my windows 7 Acer laptop, my itunes library was all consolidated and I copied the iTunes folder from music to the hdd,  after reinstalling windows I downloaded iTunes, copied and replaced the itunes folder in music with the one

  • Namespace declarations

    I have an XML file that declares some namespaces in its root element, like this: <config-ui xmlns='ocfgui.dtd' xmlns:cfg='ocfg.dtd'> | (innards deleted) | </config-ui> When I run this though the Oracle XMLParser v2.0.0 with validation on, I get "Ille

  • GotoAndPlay specific frame in external swf from main swf

    I have a main swf that loads 2 external swfs. I click on button to see content of external swf #1 and see stuff. I do something that causes external swf to show other stuff (i.e. not at beginning state) In the main swf I click on button to see conten

  • Problem in accessing mseg table using MSEG~M Index.

    Hi Experts, I am facing problem in accessing mseg table using MSEG~M Index. I used same sequence of fields and i tried with mandt field also. but it is not taking the Index and it is going for TImeout ABAP dump. This are my codes used in different wa