I erased my HP OFICEJET printer from my account

I need help figuring out how to add my printer to my account on my eprintcenter account again..i am not sure how i erased it. i can not figure out how to add it again or print out a new printer code.

Hello Prettylilme22,
I will be glad to assist you with this problem. What type of Officejet do you have?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

  • HT4505 I have 4 accounts on my Mac Pro running Mavericks.  From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner.  Can print from all accounts.

    Sorry, I was not given the option of posting to a Maverics community.  I have 4 accounts on my Mac Pro running Mavericks.  From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner.  Can print from all accounts.

    Hi there Ira Fletcher,
    I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    -Griff W.

  • Can't change printer from one account to another

    Hi,
    I seem to be stuck between the proverbial rock and a hard place.
    Here's the situation:
    1. My old e-mail account used originally to sign in to the HP eprint center has been deleted by the e-mail provider (MSN). It can't be recreated because MSN will now only allow me to create an e-mail account with @hotmail.com or @outlook.com and not @msn.com.
    2. So, I created a new e-mail address (with @hotmail.com)
    3. I then  used the new e-mail address  to create a new account on the HP eprint center.
    3. I can't add my printer to the new HP eprint center account because it is still associated or linked to the old HP eprint center account that uses the now deleted msn e-mail account.
    So, I seem stuck at this point.  
    How do I either access my old account and replace it's deleted e-mail address with the new one, or how do I switch the printer from the old account to the new account when I can't sign in to the old account to first remove it there?
    Thanks for your help!
    Kobe Zhang

    Hi Kobe Zhang
    Option 1:
    Your MSN account might be deleted but the eprintcenter wont be deleted along with it.
    You should be still able to login to eprintcenter account using the old msn id and the same old password for eprintcenter account which you used regularly.
    If you have forgot the password, i dont know how can you recover it. 
    If you get a chance to login then you can remove the printer from the old account and then claim it in your new account created usign hotmail ID.
    If you are not worried about changing your printers email ID, here is option 2.
    One more option is to de register the printer and register it again to cloud to get a new email address which can be used to claim the printer in your new account and then customize your email ID there. But be aware that you might not be able to set the same customised email ID which you have used in your old account.
    Kind Regards,
    Olilloyd
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • Can I prevent printing from managed accounts???

    I want to disable printing from the kids' user accounts. So far, I can either have everyone print or have nobody print. I haven't figured out if this is even possible. Still, I'm hoping I don't have to take the printer off of the network to manage printing.
    PowerBook G4   Mac OS X (10.4.7)  

    I believe the best and easiest way is to use the Server Admin Tools.
    I think the only other way besides the Server Admin Tools is to manually edit the cupsd.conf file.
    Matt
    Mac Mini G4; B&W G3/300    

  • How do you remove a printer from your account?

    I need to reformat my computer so I want to take my printer off my account so I won't have to create a new account when I get everything re-installed.

    You don't have to create a new account. It is linked to the code for printer that you registered. ePrint is computer-LESS!!!

  • Form prints from one account, but not from other on same computer

    With Brother 5040 printer and latest driver.
    I have a form in a Panorama V db file that will print properly from my "Test" account, but not my main account on the same machine.
    When I try to print this form from my main account I get a the intitial Print Dialog, then brief flash of the preparing to print. But it never makes it to the printer. It was working fine up until yesterday. I made no system level changes.
    This is a word processing form in PanV. Other forms in the same file print fine. A word processing form in a different file also has developed the problem. Obviously, there is some connection to Panorama, still looking for troubleshooting solutions.
    Martin

    Look for a problem in your user library. Try removing printing preference and other printing-related files from the library, as well as the Panorama plist. Then log out and back in, and see if it prints properly.

  • Can't print from any account and any application

    I have a ibook that can't print to a hp1320n through wireless connection from any user account and any application, other machines have no problem.
    It works before. below is part of the error log. An yhelp will be appreciated.
    Thanks
    Allan
    I [10/May/2006:09:51:16 -0700] System woke from sleep
    I [10/May/2006:09:55:57 -0700] System going to sleep
    I [10/May/2006:09:56:15 -0700] System woke from sleep
    I [10/May/2006:10:22:42 -0700] Printer 'mcx_1' deleted by ''.
    I [10/May/2006:10:22:42 -0700] Saving printers.conf...
    E [10/May/2006:10:22:42 -0700] getprinterattrs: resource name '/printers/mcx_1' no good!
    I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 device-uri to "smb://server/HPLaserJ1320" (was "file:/dev/null".)
    I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 printer-is-accepting-jobs to 1 (was 0.)
    I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 printer-state to 3 (was 5.)
    I [10/May/2006:10:24:16 -0700] Saving printers.conf...
    I [10/May/2006:10:24:16 -0700] New printer 'HPLaserJ1320' added by ''.
    E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
    E [10/May/2006:10:26:06 -0700] LoadJobs: Job error; deleting file "c00001"
    E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
    E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
    E [10/May/2006:10:26:06 -0700] LoadJobs: Job error; deleting file "c00016"
    E [10/May/2006:10:26:48 -0700] getprinterattrs: resource name '/printers/??' no good!
    E [10/May/2006:10:26:49 -0700] getprinterattrs: resource name '/printers/?? no good!
    E [10/May/2006:10:32:56 -0700] getprinterattrs: resource name '/printers/ ' no good!
    E [10/May/2006:10:32:56 -0700] getprinterattrs: resource name '/printers/ ' no good!
    I [10/May/2006:10:34:55 -0700] Scheduler shutting down normally.
    I [10/May/2006:15:22:04 -0700] Listening to 7f000001:631
    I [10/May/2006:15:22:04 -0700] Listening to 300ae0:0
    I [10/May/2006:15:22:04 -0700] Loaded configuration file "/private/etc/cups/cupsd.conf"
    I [10/May/2006:15:22:04 -0700] Configured for up to 100 clients.
    I [10/May/2006:15:22:04 -0700] Allowing up to 100 client connections per host.
    I [10/May/2006:15:22:04 -0700] Full reload is required.
    I [10/May/2006:15:22:04 -0700] Full reload complete.
    I [10/May/2006:15:22:04 -0700] Printer sharing is off and there are no jobs pending, will restart on demand. Exiting.
    I [10/May/2006:15:23:02 -0700] Listening to 7f000001:631
    ibook   Mac OS X (10.4.3)  

    What was the solution?

  • I have an iphone4S when i first got it everything was fine, my husband accidentally erased my mail and contacts from apple account and now ive lost 500 or so contacts how do i retrieve my contacts step by step please.

    Hi guys,
    I bought a Ipad, Iphone and an Imac all at once, learning it is a bit overwhelming.  so in practicing my husband removed what he thought were defunct accounts that apple had automatically on the phone.  When he did so all the contacts from my iphone disappeared.  I do not know how to retrieve my accounts, nor to be able to restore my lost contacts, over 500. 
    If you guys can help with restoring the lost accounts, that be great, and also step by step restore my contacts to my iphone.

    thank you guys i have worked out this little number.  becausse i didnt want to lose any old data, i didnt ohoose to go through the steps to wipe Icloud.  I prayed the old data was still there and backed up my data from icloud.
    In 30 mins or so, checked it and it was all there!
    Many thanks for answering my queries.  you rock!

  • We have an imac 27, with 2 accounts.  We share a Canon 9000 II printer, wired..  If my wife prints a photo it printes perfectly  When I print the same pic from my  account, overall dark magenta cast. Ideas????

    We have an iMac 27, wife and I each have an administrator account.  When she prints a pic from iphoto, or from  the web, the colors are perfect, they match the monitor.  When i print the same pic from my account, there is a dark magenta cast overall.  Same printer, same driver, same paper.  Using a Canon 9000series II printer, connected by wire.  This is a new phenomenon.  Using new inks, cartridges are full, all lit.  Any ideas what could be causing this weird phenomenon???

    When i print the same pic from my account, there is a dark magenta cast overall. 
    what happens when you print from your wives account?
    This is a new phenomenon. 
    When did this start, when you installed a new OS, applications, new Mac?
    A first step is to reset the printer from your account:
    Apple Menu > System Preferences > Printers: right click in the list of printers and select Reset Printing System

  • Deleting device from icloud account

    My nieces ipod touch was accidently set up with my icloud. Now she has been getting all my photos in her photostream aswell as hers in mine. I tried going into find my phone and erasing ipod and removing it from the account. The device is gone but then a few days later it shows up in my find my iphone again. If the ipod has been erased and removed from my account how is showing up again? I don't have the ability to get in touch with her anymore to get her to remove account from the actual device settings. I don't want her getting my pictures anymore!! What can I do?

    Apple Community,
    From the about 08/16/2014, I have been receiving e-mails which have no
    bearing on me or any business with my accounts ever-since I exchanged my
    I-phone 5C on warranty. I dont need the inconvenience or the waste of
    space, let alone the invasion in my connections.
    Judging from the many people complaining, Apple needs to address the iCloud
    issue because individuals are limited to deal with the scope of the
    problem.
    On Thu, Sep 11, 2014 at 1:22 AM, Apple Support Communities Updates <

  • Access Canon MX860 from multiple accounts on iMac over WiFi

    I bought a Canon PIXMA MX860 yesterday and set it up using my account on our iMac running 10.5.6. The printer is connected over WiFi. I can print and scan from my account.
    When I try to print from another account on the iMac (my wife as an account and we have a guest account) the printer queue says "Printer is currently off-line". I sent a message to Canon, they told me to set permissions for "Everyone" to Read & Write on the Library folder. I tried this for:
    /Macintosh HD/Library/Printers/Canon
    and all enclosed items. Still doesn't work.
    Has anyone else set up the MX860 to print from multiple accounts on a computer? Did you have to do anything beyond the procedure specified by Canon?
    Thanks!
    Matt

    Hello Matt,
    I don't understand why Canon support would have got you to change permissions on the Canon folder. This is not normally required.
    I have the MP980 connected via wireless, and I can print to it from my Admin account and a standard account I made up just to check. What account type do you have set for the missus?
    I also would have thought that the printer off-line message would have had more to do with her account not being able to access the network connection, rather than not being able to access the core Printers folder.
    If using her account, you open the Print Queue and select the Utility icon, and then set the Canon IJ Printer Utility to network, does the MX860 display? And if you select it, can you peform any of the Maintenance functions?
    Also, if you connect the MX860 directly to the Mac via USB, are you able to print to it using her account?
    Pahu

  • Try print from Microsoft Word XP : printer (HP Oficejet 4500 G510n-z) lops off top of random lines

    try print from Microsoft Word XP: printer (HP Officejet 4500 G510n-z) lops off top of random lines

    CD didn't work. Download software, didn't work when it came to plugging into usb port, don't even get a BACK button, nothing. Printer not recognized by laptop. Did all the solutions/uninstall/install etc. Printer is working though, prints out the exact same thing each time I press the green button on the printer, but is not connected to laptop. So it's not the printer, it works.
    Now what?

  • I erased the printer from the dock, how do I get it back?

    I erassed the printer from the dock,how do I get it back?

    Hi, open System Preferences>Print & Scan, highlight that printer, click on the Open Print Queue button, it'll show in the Dock, then Right click on that icon in the Dock, choose Optios>Keep in Dock.

  • IP address error when try to print from GS4

    I have set up ahome network so we can print from our phones or laptops wirelessly (no internet). The phones are Galaxy S4s, the printer is an HP Photosmart Plus B210 series, and the router is a netgear. The router has been reset to factory to erase the (forgotten) WEP key. All devices will find the printer. One of the phones prints fine, but when I try to print from the other I get a error message along the lines of "Using a static IP adress may cause printing issues, try setting up a dynamic IP." Both phones were purchaced and activated at the same time, the only dfference being my husband downloaded an app "HP All-In-One Printer Remote" while I wasn't here, trying to print a document. I have since uninstalled it thinking it was causing the error, but I still can't get his phone to print, The error dialouge box pops up with "OK' and "Cancel" options when you choose the printer, then it just sits there. I sent the document to my phone and it printed fine, so I don't think it is the document. Any ideas..? As far as I know, no configuration changes have been made to either phone that would cause something llike this...
    Thanks
    dawtch 

    Hi dawtch,
    Welcome to the HP Support forums.  I gather that your Samsung Galaxy S4 prints to your Photosmart B210 series printer, yet your husband’s Samsung Galaxy S4 is unable to successfully send print jobs.
    I’ve included the ePrint Job Did Not Print document for you to follow the trouble shooting steps.  I know you’ve indicated that the phones should be configured the same, but if you husband is like my husband ....
    If the steps in the document don’t resolve the issue, would you please post back with some further information:
    What version of Android OS is running on your husband’s phone? How To Check What Android Version You Have by wikiHow
    Have you set up the ePrint feature of the printer?
    How are the print jobs being sent to the printer (by HP ePrint app, 3rd-party app, or forwarding an email to the printer)?
    Is your husband connected to the same wireless network as the printer when he tries to print?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Unable to print from Photoshop CS4 in an iMac OS 10.6.3 to large format printer Epson 11880

    Hi there! I was wondering if you could help me with this case.
    Old computer: Mac G4  (purchased in 2002)
    Old OS: OS 10.4.11  (Tiger)
    CPU: Dual 1.25 GHz
    Memory: 2 RAM
    Software: Photoshop 7
    Hardware: Large format printer: Epson 11880 (64” wide monster). Prints large posters, banners, etc.
    As you can see, it is time for an upgrade...
    New computer: iMac
    New OS: OS 10.6.3  (Snow Leopard)
    Processor Name: Intel Core i7
    Processor Speed: 2.8 GHz
    Number Of Processors: 1
    Total Number Of Cores: 4
    Memory: 16 GB
    Software: Photoshop CS4
    Hardware: Large format printer: Epson 11880
    Situation: We hooked up everything and managed to print on the 11880 printer 2 times and printed two large format prints. On the third attempt, we encountered a serious problem...
    Problem: After opening a file in Photoshop and sending it out for printing in the large format Epson printer, the file goes to the printer queue and stays there for 6 seconds, and then it disappears. It does not print. :-(
    What we have done so far:
    We made sure we downloaded the latest printer driver for this printer from Epson’s website.
    The printer driver is correct. The computer talks to the printer and we are able to execute all the commands from the printer utilities panel. (i.e. check ink levels, clean heads, etc.)
    And yes, the printer is okay, because we have been using it with the old G4 machine for about a year.
    This problem got so frustrating, that we thought that something we transferred during the computer installation might be the culprit. So at one point we erased the hard drive on the new computer and reinstalled the operating system, and have not put any files from any old computers into this machine. The computer has nothing else in it. Except: The operating systems, and the Mac applications that come when the Mac comes out of the box. The only other program installed in it is Photoshop CS4 and the printer driver.
    We were wondering if this was just a printing problem, period. So we added a small printer to the computer - and old Epson 2200 we have. We sent a file to this printer and there is not problem.
    Perhaps, the file size might have been an issue? It does not matter. We can send a large 60 MB file to the printer or a small photograph measuring only 8 x 10, and these will linger in the queue for 6 seconds, and disappear never to be printed.
    Temporary relief came when we got rid of Adobe Photoshop’s Preferences file. After getting rid of the file and allowing Photoshop to reconstruct it, we managed to print two large files on the printer. Then it failed again. Tried getting rid of the preferences again, and the trick did not work anymore. :-(
    Another temporary relief came when we created another user in the computer. On the new user account it printed again a couple of times only to fail later.
    And yes, the printer WILL print from other Mac programs. If for instance, we open a file on Preview, and send it to the printer and the file will be printed. And yes, we have managed to print very large files with this method.
    In the last couple of days, we have spent 3 hours on the phone with the guys at Epson. They verified the driver and because the computer seems to be communicating with the printer and printing from other Mac applications, they suspected that the problem is with Adobe.
    We called Adobe once, and spent 30 minutes with an Indian fellow who concluded that the problem was with how the computer handles the spooling. According to him, Photoshop sends the file to the computer and the computer seems to get rid of it. So he passed the buck and told us that the problem was with Apple.
    We called Apple and spoke for 30 minutes with a friendly technician, who transferred us to a higher level techno-geek. I spent 1 more hour on the phone with Apple, and we tried everything. We went through Adobe’s knowledgebase and tried every suggested solution (see Adobe’s KB406452). It was with him that we found a temporary fix of removing the Preferences file, but the solution was short lived. He finally thought the problem was with Adobe as the printer is able to print from all applications EXCEPT Adobe Photoshop.
    We called Adobe for the second time...and after waiting on hold from 1 entire hour, we got an Indian technician, that bless his heart, had a very thick accent and had no expertise, in my opinion. He was good at collecting data and he even made me share my computer screen so that he could troubleshoot the problem. After being constantly put on hold by him (because he had to consult with someone else), he passed the buck and said that it was Apple’s problem. I just told him that it was not as likely because all programs print EXCEPT Photoshop. After trying what I would consider a “hail Mary” of DELETING all the printers from my Library folder, and not replacing them, he recorded a case number for another Adobe technician to call us in a few days.
    Because the above technician completely blew the Library, I just erased and reinstalled the OS. This time, I did not allow the OS to be updated - from 10.6.2 (that comes in the box), to 10.6.3. We tried printing using the 10.6.2 and had the same problem. :-(
    Conclusion: I think it is a problem of Adobe CS4 not getting along with Apple’s new operating system. The Epson printer is doing fine, because it has been a product that has been in the market for almost 3 years. What is disappointing is that none of the companies wants to man up and say that it is a problem and that they are willing to work on it. Instead they pass the buck to the next company.
    I can’t believe I am the only person experiencing this. Has anyone had this problem, and have you found a solution or workaround for it?

    Dear Doyle, John and Gator Soup,
    Thank you for your kind replies to my problem.
    PS is assigned 70% RAM. In fact, I have never had so much RAM in my life. Files open at lightning fast speed! :-)  We have never considered a RIP as we do not have an intense workload. In fact all the files we have tried to print print well on our old G4 with Tiger and Photoshop 7, which at the moment has saved our butt. However it would be nice to get the new faster machine with Photoshop CS4 to talk to the Epson 11880.
    Yes, we are printing directly to the printer. We have hooked up the computer via a 6 ft USB cable to the unit.
    The specs and pixel dimensions of a typical file we print are:
    Type of file: tif  (in this case it is an RGB file) // However, we avoid any color management from the computer or the printer when printing it at this time.
    File size: 60 MB
    Pixel size: 6796 x 3100
    Print size: 34" x 16" @ 200 dpi
    I have not tried saving it as a pdf yet. Will try that next.
    I did go to the Console on the Mac though, and recorded its activity between 5:14 pm - 5:19 pm when I tried to print a file.
    Remember, the symptoms are:  We send a file to the printer...The file goes to the printer queue, and it lingers there for 6 seconds. The file then disappears.
    Although there is a cryptic message of "invalid colorspace" in the log, I don't believe that the file is corrupt. First because we have tried several files, second because smaller versions of these can be printed in another Epson 2200 printer, and third because the large format images can still be printed using our old G4 machine with Tiger and Photoshop 7.
    This might provide me with extra ammunition for when I call both Adobe and Apple on Monday. Apple has been quite good on customer support - particularly when they upgrade you to higher level geeks. ;-)   Do you have any idea I what time I should call Adobe so that I can get people on the western hemisphere to answer the phone? It seems that after a certain time they start speaking with an Indian accent over there.
    Enclosed, for whatever is worth, is the Console's log:
    5/15/10 5:14:46 PM System Preferences[2947] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types:  dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found.  Did find:
    /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
    5/15/10 5:14:46 PM [0x0-0xf00f0].com.apple.systempreferences[2947] System Preferences: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
    5/15/10 5:14:46 PM System Preferences[2947] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4b00880: Non-aligned pointer being freed (2)
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14390: Non-aligned pointer being freed (2)
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14410: Non-aligned pointer being freed (2)
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14490: Non-aligned pointer being freed (2)
    5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
    5/15/10 5:17:08 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] file://localhost/Applications/Adobe                   P
    5/15/10 5:19:34 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Sat May 15 17:19:34 Norm-Nielsens-iMac.local Adobe Photoshop CS4[2991] <Error>: CGImageCreate: invalid image colorspace: NULL.

Maybe you are looking for