I erased Quicktime and now I can't open any other programs

I have a MacBook and use an OS X System Version 10.6.8. I tried to erase the Quicktime 10.0 I had because it wouldn't play my files.  Now it won't let me open any of my other programs like Iphoto, Itunes, Word, anything!  When I open these programs they instantly "quit unexpectedly". What should I do now?
I tried to download Quicktime 7, but it wouldn't let me do that either, I just kept getting a update your version warning. HELP!

Try restarting your MacBook in safe mode (holding down the shift key while restarting) then give it a try.  Also run disk utility on your hard drive to verify/repair it. 

Similar Messages

  • HELP! I attempted to erase free space and now I can't open any files!

    Hi everyone! I hope you can help me with my problem.
    Last night, I attempted to erase free space from my HD using disk utility. During the operation, the computer hung, so it wasn't able to complete 'creating temporary file' operation. So i had to stop the operation. And now, I can't open any files! Turns out my HD was full. But prior to my attempt to erase free space, I still had 25GB out of 55GB of free space. What happened? And how do I fix it? A lot of important files are in my HD and I don't want to lose any of it.
    Hope somebody could help me. Thanks a lot!
    allworkedup
    iBook G4 14"   Mac OS X (10.4.6)  

    Hi, Scary isn't it? I did the self same thing. Check your trash, you should see one or more disk images there. Empty the trash. All will be OK thereafter.
    If they're not there, restart and either the system will sort itself out or they will appear in the trash, so empty it.
    See here for my thread on the same subject.
    Good luck,
    Adrian
    Message was edited by Adrian: Oh, and Welcome to Discussions !!

  • How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents

    How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents.
    I get this error message every time:
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2013-05-28 02:28:42 +0000
    Application Name: Microsoft Word
    Application Bundle ID: com.microsoft.Word
    Application Signature: MSWD
    Application Version: 14.3.4.130416
    Crashed Module Name: Microsoft Word
    Crashed Module Version: 14.3.4.130416
    Crashed Module Offset: 0x00938638
    Blame Module Name: Microsoft Word
    Blame Module Version: 14.3.4.130416
    Blame Module Offset: 0x00938638
    Application LCID: 1033
    Extra app info: Reg=en Loc=0x0409
    Crashed thread: 0
    I tried to remove the plist files, but it hasn't worked! Please help!

    What version of Microsoft Office for Mac do you have?
    Pete

  • I downloaded Lion last evening and now I can't open any of my word documents - HELP

    I downloaded Lion last night onto my MacBook pro and now I can't open any of my word documents...

    What happens when you try? Any error messages? What version of Word? Office 2004 does not work with Lion. You need Office 2008 or Office 2011.

  • I Just downloaded Acrobat Pro after trial and now I can't open any files...

    I Just downloaded Acrobat Pro after trial and now I can't open any files, when I click on icon I get this message: the last time you opened Acrobat, it unexpectedly quit while reopening windows.  Do you want to try to reopen its window again? If you choose not to reopen windows, you may have to open and position the window yourself.  There are 2 options: Don't Reopen or Reopen  Either choice leads to a window that pops upend says please wait while we launch Acrobat and then window just closes quickly.

    Hi mbt6833,
    You may goto control panel and then go to program and features.
    Select the Acrobat pro and chose the option change from the top. Fallow the onscreen instruction a windows will pop up where you need to choose repair.
    ~Ajlan Huda.

  • I just downloaded ox maverick and now I can't open any appleworks 6 docs

    I just downloaded ox maverick and now I can't open any appleworks 6 docs

    unai40 wrote:
    Désolé! aucune idée! Réinstalle l'application et peut être que ça s'arrangera!
    AppleWorks ne peut pas fonctionner sur Mavericks, ou quelque chose de plus récent que Snow Leopard.
    AppleWorks cannot run on Mavericks, or anything later than Snow Lepoard.
    LibreOffice can open word processing documents and some Draw documents. The most recent version will open spreadsheets, with some limitations, otherwise only the older version of Numbers, not the one currently in the Mac App Store, will open them. Nothing will open database documents.

  • I updated my applications and now I can not open any of them.

    I updated the required updates due to being given no other option to go around the update and now I can not open any of the applications I installed prior, it just shows the words up to date italisized and grayed out giving me no options to oppen the applications now that I have updated my applications.

    What is your operating system?
    What applications are these?
    How are you trying to open them?  From your description it sounds like you are opening the Application Manager.

  • HT4972 I updated my ipod touch and now I can't open any of my videos what happened and what can I do to get them to open

    I updated my ipod touch and now I can't open any of my downloaded apps, what would happen if I reset it to factory settings?

    Try a hard reset.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If still no luck try downloading and installing a free app from the app store.  This has resolved the issue for many users.
    B-rock

  • HT1848 I synced my on my iPad 2 to my pc yesterday and now I can not open any of my apps on my iPad2, those purchased and those that are free.  All it does if I click on the app is flicker but does not open.  can anyone help?

    I was told I could sync my music on my pc with my ipad2 by an apple agent.  I hooked my ipad2 up to my pc and did so, but now I can not open any of my apps on my ipad2.  when I try it just flickers and does not open.  Can anyone help?

    On you iPad, force close all the Apps in the multitask window.
    Follow these steps to force an app to close:
    From the Home screen, click the Home button twice. 
    Tap and hold on the app. 
    When it starts to jiggle, tap the to close it on by one until all cleared
    Now do a Soft reset of your iPad:
    Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, try your Apps again and see if this resolves the issue.

  • The iOS 5.0.1 won't download for my ipod and now i can't open any of my apps. HELLPPPP!!!!!!!!!!!

    I'm trying to download the new iOS 5.0.1 for my ipod touch and it keeps telling me that i need to check my internet settings even though my internet is fine. And now I can't use any of my apps they just flicker and go back to the home screen..

    - For the download, disable the computer's security software during the download and update.
    - For the other problem:
    --- Reset the iPod.  Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    --- Download/install a new app.
    --- iOS: Troubleshooting applications purchased from the App Store

  • I recently downloaded the latest version of SnowLeopard and now I can't open any pdf files. Has anyone else had this problem?

    I recently downloaded the most recent version of snow leopard to my imac. Now I can't open any pdf files. I just get a dark gray screen when I try to pull one up. Has anyone else had this problem? Please advise.

    See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
    tt2

  • Help I just installed the latest update on my IPhone4 and now I can't open any of my stored podcasts. When I hit the podcast icon, the screen goes white for a second and the goes back to the opening page with all the icons. What happened?

    Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?

    Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.

  • Java 7 installed today and now I can't open any web page in FF!!

    I downloaded JAVA 7 today and now my mozilla will barely open any pages especially youtube and google! I have uninstalled Java rebooted the PC and still the problem persists! I don't like to use Chrome or any other browser for obvious reasons. Please can you help me?

    are you getting any error?
    Start Firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode to Troubleshoot the issue] and to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    * https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I downloaded the New numbers iOS and now i can't open any numbers documents

    I just recently downloaded the new Mavricks update and now all my numbers Documents say i need to download the new system before opening. I alread have the new numbers system so i am unsure of what I need to do to fix it. I use numbers all day for my job so not having it is really not an option.

    Go to the App Store via the Dock or by starting the program from your Applications folder. Sign in with your Apple ID/Password and type Numbers in the search box on the top right. That should let you navigate to the Numbers download.

  • Updated to 7.4 by mistake and now I can't open any itunes

    I have a powerbk g4 Max osx 10.4.3 and I updated my itunes. However, when it finished, I try to open it and it says I need 10.4.7! I just need an Itunes!! ( I knew I shouldn't have updated)

    Make sure you have a back-up of your Music Library and Playlists and you must have at least
    512 MB of good RAM .... 1GB would be best.
    http://docs.info.apple.com/article.html?artnum=93763
    I would definitely follow poster Diane Wordsmith's advice to update your OSX to at least 10.4.7 or better. But first uninstall iTunes 7.4 in the following manner:
    Delete the following files:
    ◦ The iTunes 7.4 application (located in /Applications)
    ◦ com.apple.iTunes.plist (from ~/Library/Preferences)
    ◦ iTunes.pkg (from /Library/Receipts)
    ◦ iTunesX.pkg (from /Library/Receipts)
    Repair Permissions
    Download/install the COMBO Mac Update for 10.4.7 or better (8,9,10) from the Apple website
    RESTART ....... Repair Permissions
    Make sure you have QuickTime 7.2 installed (from the Apple website) before you ......
    download/install iTunes 7.3.1 from the Apple website (if available) or from:
    http://www.oldapps.com/
    Repair Permissions ...... again!
    Now you should be good to go!
    DIXIE

Maybe you are looking for

  • Camera RAW update issue with Bridge CS6

    Hi folks, I recently installed a routine update for Camera RAW 8.4 and now have a bunch of issues with Bridge including - - No previews or ratings showing - Ratings filter not working - Can't open images directly into Camera RAW without first opening

  • Report on JDE can load

    Hi All i want to ask about this error message what the meaning of folowing NO DATA SELECTION INFORMATION FOUND Data selection information for this report has not been generated. COULD NOT LOAD REPORT Please use the latest Java generator to regenerate

  • MUVO V200 Help Required

    Hi, I recently purchased a MUVO V200 with 52 mb memory. My first problem was the FM radio would not work, but I have since put this down to it requiring more power from the batteries than standard music. Bit of a pain as my rechargable batteries, eve

  • CR2-RAW files & Elements 7

    I have Elements 7 (not premium) and cannot bring up Canon's CR2-RAW files for post processing. I read where there is an update but the threads that start to take me in the direction of update for it specify for "Premium" version of Elements. Can anyo

  • Urgent  -   How to create IDOC

    Hi all, I need step by step documentation to create IDOC. points will be assigned. thanks andrea