I export from final cut pro 7 to idvd everything comes out fuzzy on the dvd

I film using a canon fs10. I edit in final cut pro 7, then export to quicktime format, then I burn the dvd using idvd. But the final product always comes out blurry and fuzzy. I can't see what I am doing wrong. Is it because I am not filming in HD?

Using iMovie, for one, is capturing your files to a codec other than one FCP wants to work with. You would be better off dragging and dropping the files from the camera to a folder on an external drive and converting the footage with MPEG Streamclip to whatever codec you want to work in.
Using iDVD to compress and author the dvd takes away any control you have over the compression settings for the project.
You'd be well off getting a FCP training book from someplace like Peachpit Press, or a training dvd from someone here or out there who produces them.

Similar Messages

  • Can files be exported from Final Cut Pro X trial?

    Can files be exported from Final Cut Pro X trial?

    It doesn't seem to work on mine, when I go to command: the export button is in grey, whereas all the others (import; customize) are black and can be actionned. Is this a restriction in the trial version or is there a way to activate export?
    Thanks

  • Exporting From Final Cut Pro 5.0

    Hello,
    I need to export my work from Final Cut Pro 5.0 to a Quicktime Movie with the following settings -
    Compression: H.264
    Frame Rate: 15fps
    Bit Rate: 200k
    Is this posible without loosing the quality of the video footage? The footage was capture from a MiniDV tape.

    Is this posible without loosing the quality of the video footage? The footage was capture from a MiniDV tape.
    If you want full resolution 640 x 480 then 200Kbps isn't going to look very good. As a guide you can note that Apple is using about 600Kbps to encode the iTunes video content and that has a resolution of only 320 x 240. However, since you're only using a frame rate of 15fps you should be able to produce good looking content at just over 1Mbps for 640 x 480.
    Of course, it does depend upon the nature of your source video (the subject). Simple "talking head" shots could go lower, while rapid action material might need considerably more than 1Mbps (along with a higher frame rate).

  • How to play an HD movie exported from Final Cut Pro?

    How to play an HD movie exported from Final Cut Pro? on a mac???
    thanks

    How to play an HD movie exported from Final Cut Pro? on a mac?
    Most FCP users export them in a high-effeciency distribution/delivery compression format (e,g,, H.264/AAC) targeted for a particular application and/or device. For example, you could export using H.264/AAC at full display resolution for playback in the QT Player at an appropriate data rate if your platform and display can handle the output. TV would limid the video to 960x540 at 30/29.97 fps and normal AAC audio to 160 kbps at 48.0 KHz. Files exported for display an the Internet would be restricted by the bandwidth being targeted. Etc, etc, etc. Unless the file will only be played on your own platform, what you do not want to do is use an FCP only compression format which would limit viewers to those recipients have the same FCP codecs installed.

  • 16:9 movie exported from Final Cut Pro X showing up as 4:3 movie in iDVD

    I have exported a movie from Final Cut Pro X in 16:9 and when I open it in iDVD (also in 16:9 mode) it shows up as a 4:3 video.

    SD video?
      http://www.fcpbook.com/Video9.html

  • Burning a video from Final Cut Pro using iDVD

    When I export and save my video from Final Cut Pro to a folder (export->Using Quick Time Conversion). When I do that there are several different videos that are saved in my folder (ie-Kelly Michelle; Kelly Michelle-av1; Kelly Michelle-av2; Kelly Michelle-av3; Kelly Michelle-av4; Kelly Michelle-av5).
    iDVD is the program I need to use, I do not have any other programs. Therefore, I import the file to iDVD and once everything is ready in iDVD I try to burn the dvd. However, in the last stages of burning a window pops up and says that "an error was found during the burning process". It does not tell me what kind of an error it is. Does anyone have any advice or a step by step process that I need to do in order to burn my dvd successfully.

    The simplest way to prepare a video for iDVD is to *Export/Quicktime Movie* (NOT Using Quicktime Conversion), select Current Settings, Audio and Video and, depending on your needs, other 2 options:
    o- +Make Movie Self-Contained+ is preferred to have an independent movie (you can move the exported file, you can continue editing your FCP project before burning the exported version, etc.) but requires more disk space and more time for exporting.
    o- +Chapter Markers+ (NOT All Chapters) must be selected if you created Chapter Markers in FCP (markers in the timeline, not the clip, and clicked the Add Chapter Marker button in the marker dialog).
    The resulting .mov file (whether self-contained or reference) may be easily imported to iDVD.
    Piero

  • Best video format to export from final cut pro to encore

    hi, i'm using final cut pro and no matter what format i export my video in, be it quicktime, mpeg2 or avi, there's still a slight degradation of picture quality when i import it into encore. mpeg2 by far suffers the least. but is there a best video format i can export from final cut to adobe so dat there's minimal loss in quality?

    Sure, export it as an uncompressed AVI or QT file.

  • Problem exporting from final cut pro to compressor

    Hi,
    I'm trying to export to compressor from Final cut pro, but every time i do so, I keep getting the same error message 'Selection contains no media' but it does. It will export to Quicktime fine. I'm only trying to export to compressor so I can save it as an mp2 file.
    I'm using FCP V5.0.4
    Compressor V2.0.1
    Mac OS X V10.4.8
    Also on previous versions of FC I could output to Mp2 and it would include the chaper markers, my last sucessfull project, it did not.
    Any help would be greatfully recieved.
    G5 Single Processor 1.8   Mac OS X (10.4.8)  

    Philip:
    Check this old thread:
    http://discussions.apple.com/thread.jspa?messageID=1106846&#1106846
      Alberto

  • Exporting from Final Cut Pro

    Hi I have shot a show that ran for 2 hours. I have edited and now just need to know how I should export it and what format so it can fit on a dvd. I will be using iDVD 5 for the menus, and I am under the impression iDVD 5 doesnt support mpeg 2 files. So i need another way to export from Final Cut and then put it in iDVD 5 then onto a dvd.

    I'm afraid I've mis-stated some information, and I apologize.
    First, you would need to select 'best QUALITY' for anything over 60 minutes.
    Generally iDVD5 should successfully create a 90 minute DVD. It is supposed to be able to create up to 2hours of content, but that would include all media creation items, including movie file(s), motion menus, drop zones, music...etc.
    I had come across a link that discussed creating longer DVDs in iDVD, but it works with iMovie and is not totally relevant to this forum.
    Again I apologize, but if it interests you, here is the link...
    http://lonestar.utsa.edu/llee/idvd.html
    K
    EDIT - I might add that The Capt. and Mr. Hofmann would certainly be the words of wisdom I'd choose to go with if I were you.

  • Exporting from Final Cut Pro for DVD Studio Pro

    In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
    Erin

    The best and only format is mpeg2/m2v.
    The encoding rate for video is based on the length of the sequence in h/m/s.
    They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
    Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

  • Exporting from final cut pro to quicktime

    hi,
    i am trying to export my movie from final cut pro to quicktime. after exporting, the file is actually a final cut pro movie file, NOT a quicktime movie as intended. what am i doing wrong?
    to export the movie as quicktime, i know i go to sequence>settings> set the settings and then go to file>export>quicktime. what am i doing wrong??? it seems so simple!
    thanks,
    farilee

    You aren't doing anything wrong. It is still a quicktime movie, but set to auto open by FCP.
    Two things:
    (1) add a .mov extension to it.
    (2) select it in the finder, and do a get info. Change the Open With... to QuickTime Player.
    Make sense?
    Patrick

  • FLV Export From Final Cut Pro

    Hi Folks,
    I've been reading and reading and just want to know what is
    the right way to go about exporting video from a third party
    application like Final Cut Pro. Yes, the easy way is to
    Export>quicktime conversion and go from there. If this is the
    best way then great, But i'm wondering if exporting as a lossless
    quicktime codec such as the Video codec or the Anitmation codec
    would be a better choice then go to the flash video encoder with
    the lossless file. I heard that exporting straight out of FCP could
    be bad as the video needs to be deinterlaced before the flv stage.
    If this is the case, what are the best settings when
    exporting a lossless quicktime file? There are about 6 setting s
    that need to be set and I haven't a clue what would be the right
    settings.
    If exporting from final cut straight to flv, are you folks
    dropping the frame rate to 15 fps(cutting your frames in half). Is
    this working better for you?
    Well thanks for all your help, I keep on testing short clips
    and can't seem to find a any certain configuration that i really
    like.
    hanks so much for all your help.
    todd

    Todd ..
    We do quite a bit of video / flv work.
    Our editing software is VEGAS so unfortunately we can't
    render directly to flv .. but avi->flv via Sorenson Squeeze.
    If Final Cut allows rendering directly to flv, my
    recommedation would be to use that functionallity. Caveats .. if
    the encoder can 1. deinterlace i.e. progressive scan. 2. reduce
    your framerate from 29. to 15. 3. gives you the ability to control
    # of key frames.
    The logic being .. use the fewest number of encoding methods
    to get from source to output to maintain best quality.

  • How to Free up Disk Space to export from  Final Cut Pro to QuickTime?

    I am using Final Cut Pro on a Mac OX10. When I try to export a Final Cut Pro project to QuickTime I get a message saying that I do not have enough disk space available. How do I free up additional disk space? (I am a little confused because I have already deleted more disk space than I am current trying to use)
    Powerbook G4   Mac OS X (10.4.7)  
      Mac OS X (10.4.7)  
      Mac OS X (10.4.7)  

    Might try restarting the computer, just to refresh the system's memory... be sure you empty the trash too... the new space won't show up until you do.
    Jerry

  • 16:9 Export trick from Final Cut Pro to iDVD

    If this is posted, I have not seen it. I have spent years trying to get a decent photo quality video on my widescreen tv without peoples faces looking like 4 pixel blocks. I think I have found a pretty decent result.
    This is for Photo Slide shows only. (If you are going to mix widescreen video with photos, you must have the video in the timeline before you change the sequence to Anamorphic.)
    Create my widescreen project in Final Cut Pro
    (Photos have already been custom cropped (16x9) and reduced to 960 px in height before importing. iPhoto does this easily)
    Sequence settings in FCP: Use the default settings just check anamorphic. Also, best compressor for photos seems to be DVCPRO.
    When project is ready to export, Export to Quicktime Movie
    Setting: Custom (the Sequence Editor pops up)
    In the Aspect Ratio drop menu select "HDTV 720p (16:9) This will change the aspect ratio to 1280x720. All other settings should match your sequence settings.
    Export
    Open the movie in QT Pro. Select the Video Track in the Movie Properties
    Check Preserve Aspect Ratio
    Change the Height to 480 (the width should automatically change to 853)
    Close the movie and save changes.
    (This step really does make photos clearer)
    iDVD will read this as widescreen and create descent non pixelated SD quality on your Widescreen TV.
    If you have a better way to do this, or can get better quality than this achieves, I would be interested to know.
    Profe

    Hey Mish.
    I use 960 px because it is double the minimum 480. That allows me to use zoom animation or crop further without losing quality. I guess I would not have to go as high as 960 but its a number easy to remember.
    As for your questions about my methods. I am one of those Final Cut Users that really does not understand how things work. I am just good at using it to create my movies. So what you say is Greek to me. Also, for some reason, I do not have Compressor application that so many people talk about in the forums. I just got so fed up with the crappy result I got with just exporting with the same settings as the sequence. The result was pitiful. If you think of a better result using different sequence or export settings, I'll try it.
    I do a Highlights DVD project once a year. It's about 2 hours long (photos and video) and this method has given me the best ever result. It's my last year doing it so I don't want to invest in any software. My buddy would also tell me to use DVDSP and I've used it a couple of times but there is so much to it that I always forget what to do. So I have to "play nice" with iDVD
    Profe

  • Exporting from Final Cut Pro - Quality of AfterEffects Text Graphics

    I am once again struggling with Final Cut Pro exports in terms of the look and quality of AfterEffects graphics.
    I have AfterEffects MOV files that look fine as is (both as Animation and as Apple Pro Res) and they look fine on the timeline in FCP 7.   When I export though from FCP (in multiple ways - H.246, AppleProRes, 1080/720, etc.), the graphics within the exported video are breaking up and look pixellated.   Any advice?   Thank you!!  - [email protected]

    This is very hard to tell because, first, we don't know anything at all about your export settings, frame rate, frame size or even how you are judging the quality, and second, this is not a Final Cut Pro forum. There are a bunch of FCP users that use AE but if everything looks great coming out of AE as a rendered DI (digital intermediate) and your are using the DI in FCP then the problem is in Final Cut.
    Maybe a better explanation of the process in FCP and some screenshots or examples of the rendered from FCP vs the rendered from AE would help us figure out what is going on.

Maybe you are looking for

  • Can't get backups out of the trash

    Moved a lot of old backups to the trash and now they are stuck there. When I try to empty/secure empty the trash I get error code 8003. I also can't move the files now to any other location or I get "-these files cannot be modified-" message. Before

  • Drag and drop in a tree

    Hello , I have a column tree (CL_GUI_COLUMN_TREE) and want to sort nodes within this tree by drag & drop. (Like in the favorites menu SAP Easy Access) Has anyone a sample report for this? thank you in advance. Werner

  • Integration Kit and SSO

    Hi ; 1)  Is there a valid comprehensive  Guide to install Integration Kit , SETUP SSO  between SAP BW and Business Object 2) if we have an AD authentication turned on for windows - bobj users  , can we still use that authentication for users when acc

  • Create error in crmd_order

    hi all , i am not getting list of transections in crmd_order while creating a new transection. I have tried all the options from DEFINE TRANSECTION TYPE in spro path- spro-> crm->transection->basic settings->define transection type.. thanks in advanc

  • Unable to update podcasts after new iTunes update

    I have just downloaded the new iTunes & now can no longer update my favouite podcasts. I seem to only have the option to subscribe to each podcast -  which will waste huge amounts of download plus annoying amounts of time in deleteing unwanted ones.