I exported a PDF document to Word, however, I am unable to edit the document, what is next?

I exported a PDF document to Word, however, I am not able to open it for editing, how do I get into the Word version for editing?

This may be helpful: Spanish PDF to Word in English

Similar Messages

  • I exported a pages document to word, but was not able to edit the new word document.

    i exported a pages document to word, but was not able to edit the new word document.

    I have a OSX IMAC Version 10.8.5.  I got pages at the same time I purchased this computer.  I use a document to write all my passwords. Seems like when I E-mail myself the document from pages, I have not been able to type in the document, it acts like it is locked. I checked all the "lock" and "unlock" fields, and none of them were locked.  I notice the document says PDF.  How do I correct this?  Seems like I've tried everything.  If you can help, that would be great!

  • Unable to edit the document in sharepoint2010

    Hi,
    I am unable to edit the document in sharepoint2010 with IE-10 while editing i am getting the error like
    "The form cannot be displayed in the browser because the use of session cookies has been disabled in the current browser settings.In order to load the form the session cookies must be allowed."
    Please suggest me on this.
    Thanks in advance.
    Regards
    SidduSekhar

    Hi SidduSekhar,
    Based on your description, I need to verify the things below:
    Which browser did you use? Did this issue occur with all the browsers?
    Is the cookie disabled in the browser? If yes, please enable it.
    Did you implement security fix in the web.config, such as <httpCookies requireSSL="true" httpOnlyCookies="true" />? If yes, please set it to false in web.config.
    Did you configure Alternate Access Mapping for SharePoint with a URL containing a “_” character? If yes, please remove the “­_” from the URL.
    More references:
    http://blogit.create.pt/miguelisidoro/2013/12/01/sharepoint-and-the-form-cannot-be-displayed-in-the-browser-because-the-use-of-session-cookies-error/
    https://prasantabarik.wordpress.com/2014/05/03/sharepoint-2010-workflow-task-error/
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Used the online converter to convert to word doc. how do i now edit the document.

    how do i edit a document that i converted from pdf to word using the online converter

    If it's now a Word file, open it and edit it in Word. Help under the Help menu in Word.

  • After I exported my PDF file to Word I cannot edit?????

    After I exported my PDF  file to Word it will not let me edit????

    Hi naomih57262273,
    Could you please let me know whether you are accessing ExportPDF online service via Acrobat.com or using Adobe Reader.
    Once you convert your PDF to Word, first download the converted file on your computer.
    Open the Word file and click at 'Enable Editing' button on the top which would allow editing.
    Please try again and then let me know.
    Regards,
    Anubha

  • I downloaded a standard price list utilized in the industry however, I am unable to edit same.

    I dowloaded a standard price list utilized by builders, electricians etc., however I am unable to edit same.  What can I do

    To edit a PDF file, you can use Adobe Acrobat XI. Or you can use Adobe ExportPDF to convert the PDF to an editable format (like Word).  You cannot edit PDF files with Workspaces (which is the forum you posted in).
    Note that not all PDF files are editable - even with Acrobat or ExportPDF.

  • Author of the document unable to Edit the .Ptxt

    Encrypt the TXT file with NATIVE file encryption by using RMS Sharing Application.
    Open the Encrypted .ptxt file by Author, document is opened, but unable to EDIT the document even with the author

    I think it's just that the interface doesn't have any text editing capabilities.  It's basically the same situation with the supported image formats. Do you have the option under Protect-in-Place to unprotect it?

  • How to export a PDF to a word document? at the moment it came up with "The encoding (CMap) specified by a font is missing ????? what can I do?  thanks

    How to export a PDF to a word document? at the moment it came up with "The encoding (CMap) specified by a font is missing ????? what can I do?  thanks

    Hi frenchiem,
    This is due to the PDF file cannot display the original fonts. To fix it, creator should create the PDF file with the embed font option enabled. Thus, user can open the file on any platform with the same layout. Or the Acrobat product can display them after you install the appropriate font support package on the client side.
    Regards,
    Rave

  • After I exported a PDF to a Word doc and downloaded it, I can't get the pointer tool to work.

    After I exported a PDF to a Word doc and downloaded it, I can't get the pointer tool to work. When I click on the document text, the only tool is the "move" tool. I can't edit or select text. Please advise.

    Version of Adobe: Adobe ExportPDF (not Pro)
    Operating system:  Windows 8.1
    Steps I am taking: When the PDF file is selected and opened, I clicked on Tools menu on right side of the screen; then I clicked on Select PDF file; then under Convert To, I selected Microsoft Word (*.docx); then I hit the box below that; and clicked Convert. I then see the message that says it is Converting to Export PDF Online. Then I see a link below that, that says Download Converted File. This takes me online to Adobe Acrobat .com, where, I see the command, Export PDF, and see a blue box on the same screen that says Select PDF Files to Export. I click on the thumbnail of the file I want to export. This brings up, online, a screen containing the file I wanted to convert to Word. Then, on the same screen, I click on the icon on the right hand of the screen that says Download. then I click on the box on the bottom the screen that contains the Word document I had wanted to convert. This brings up the Word doc. in Compatibility Mode the latest Word version, which I am unfamiliar with and which has a Picture Tools tab that I cannot escape from and I cannot get any selection tool other that the Move pointer, and I cannot find the Select text pointer to select any text on the page. I don't want this Word version and do not know how to return to the old version of Word that I am familiar with.
    Can you help me, please?
    Theresa Julia Schuer

  • I have a word document that I have put hyperlinks in and turned into a pdf.  When I email and receiver opens in iPad the document is blank.  When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content

    I have a word document that I have put hyperlinks in and turned into a pdf.  When I email and receiver opens in iPad the document is blank.  When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols.  What is going wrong?

    You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.

  • When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents.  I assume it is a default security under the enhanced security settings of the Acrobat

    When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents.  I assume it is a default security under the enhanced security settings of the Acrobat Pro XI which I recently purchased.

    Acrobat (Pro or Standard) does not apply a "default" protection. It appears that someone or some other process has applied protection.
    Be well...

  • I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

    I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?

    Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
    William B. Kohn, Esq.
    General Counsel
    Paul V. Profeta & Associates, Inc.
    769 Northfield Avenue
    Suite 250
    West Orange, New Jersey 07052
    (973) 325 - 1300
    (973) 325 - 0376 (Facsimile)
    [email protected]<mailto:[email protected]>

  • I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

    I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
    Windows 7 64
    PC

    everything works on a laptop (

  • When I convert a PDF to a Word doc, it "converts" as a picture and I cannot edit the document. What can I do to get the PDF to convert properly?

    When I convert a PDF to a Word doc, it "converts" as a picture and I cannot edit the document. What can I do to get the PDF to convert properly?

    Hi conversionnewbie,
    Are you able to select the text in Word by triple-clicking inside the text box? (Sometimes text selections can be tricky in converted files.) If you can't select the text, then I'm guessing that the PDF was created from a scanned file (so the text becomes images). Make sure that OCR is enabled when you convert the file to Word. OCR is enabled by default in the ExportPDF web interface, but can be disabled in Adobe Reader. If you're converting to Word from within Adobe Reader, make sure that OCR is enabled and that the correct language is selected:
    Please let us know that works for you!
    Best,
    Sara

  • I exported a pdf file to word but i can't edit

    I exported a pdf file to word but i can't edit. What am I doing wrong?

    Hi hc69,
    You're most likely doing nothing wrong! For starters, please try triple-clicking in the text that you want to edit in Word.
    If that doesn't work, it may be that the PDF was created from a scanned page, and that OCR (optical character recognition) wasn't performed on that PDF to convert the scanned/image text to selectable/editable text. OCR is enabled by default when you convert via the ExportPDF website, but can be disabled in Reader. Please see How to disable Optical Character Recognition (O... | Adobe Community to make sure OCR is enabled.
    Let's start there. If neither of those solutions work, we can take it from there.
    Best,
    Sara

Maybe you are looking for

  • How can i delete shared gmail calendars on my Mac's calendar?

    Hello, My company's email, calendar, etc is set up with the Google Apps. I created a Gmail account in my Mac (Running Yosemite) so I could sync the Calendar. In the Gmail calendar, you can view calendars from teammates additional to your own to make

  • Getting OOM error while retreive 2lakhs record from DB

    I have a java program with a simple Select query that fetches around 2lakhs record from DB and will display in a JSP Page. When I try to fetch huge amount of data the server causing OOM. I got few suggestions to add setFetchSize(1000) to my Statement

  • Photoshop CS2: name server problem: Is there a solution?

    Hi! I have Photoshop CS2. I can't start the program anymore because of the already well known name server problem... (DEAR ADOBE!! HOW COULD YOU!!! ) Now, what can I do? As far as I know I purchased the software for an unlimited amount of time (thank

  • Is it possible to use format like X12 in PI 7.0 ?

    I would like to know, does PI 7.0 supports ebXML (Electronic Business using eXtensible Markup Language) and X12 EDI?

  • Runtime.exec fails to launch C++ application

    A java application launches a C++ Windows based application, providing it with arguments on the command line. This application is supposed to start, to execute something and to exit. This is working as long as the java code runs from the command prom