I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format.
I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format. I took the same file and transferred it in my MacBook Air and was able to put it in the iBooks application no problem, the MacBook Air runs OS X v 10.9.5
Please advise as to Why it would work on an older OS X version as oppose to the newer OS X Yosemite
Thanks
JP
Thanks Lyra,
I may be doing something wrong because looking at the "Purchased" in iBooks I only see all the books that I actually purchased, none of the iBooks that I created in iBooks Author shows up. I can re-download all the iBooks I've purchased and some in iCouds, but the ones I've created in iBooks Author are no where to be found.
Any help is much appreciated,
Best Regards,
JP
Similar Messages
-
How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?
Thank you!
Disabling firewall and AV did the trick!
Kudos.
Alex -
Trying to upload some photos to an e-mail an I get a message that says "The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it." To where do I navigate to unlock this so I can have access to my photo library?
Couple of things to try:
Restart your mac and try launch iPhoto again.
If that fails:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a file called ‘iPhoto’Lock.data or similar. Drag it to the Desktop. Make no other changes. Start iPhoto. Does that help?
If not: Where is your iPhoto Library stored? If it's on an External Disk, what format is that? -
im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
How do I sync a movie downloaded to iTunes, but I get a message that says "Cannot sync movie to iPod because this computer is not authorized"? How do I fix this?
And I assume you have already checked to see if your iTunes purchases are authorized by choosing Store -> Authorize This Computer?
Some have been able to resolve this issue by removing the downloaded purchase and redownloading it again at no cost via iCloud. See this article for more information on redownloading past purchases.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock -
I get a message that says, the required operation requires elevation <run as administrator>. I am the owner of this laptop and I have administrative authority, why does this show and how can I fix this. Itunes store is the ONLY program I am having trouble with.Very , very frustrating.!!!!!!!!!!!!
I will assume you're using Windows Vista-7:
Try these steps instead:
1 Click start, and in the start menu search, type "cmd" (without the quotes) DO NOT PRESS ENTER!
2. Right click the "cmd" search result
3. Click "Run as Administrator"
4. If you get a pop up message, click yes or continue
5. Type the command in the window as you did above.
In an effort to try to prevent programs from messing with your computer, programs don't run under your administrator account unless you tell them to or they ask. This gives the Administrator (elevated) privelleges that you need. -
I just purchased a new iphone 4S and I'm trying to loan some music from itunes. I keep getting a message that says not enough space on my phone. I checked my phone and I have 5.1G available. I deselected all the songs on my itunes to try and get it to sync and I keep getting the same message. Any tips?
Hey csumner1,
Thanks for the question. I understand you are receiving a "Not enough free space" alert when attempting to sync your new iPhone 4s. The following article may help to resolve your issue:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Resolution
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
1. Turn off the music or photo sync option in iTunes for the device.
2. Click Apply to sync the changes to the device.
3. Turn the music and photo sync options for the device on again.
4. Click Apply again to try to sync the device to iTunes.
- If the 'Not enough free space' alert appears, continue to step 5.
5. Turn off the automatic syncing functions for the iOS device. To do this:
- Select the iOS device from the iTunes window and click the Summary tab.
- Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
- Click Apply to sync the changes to the device.
- Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
6. Restore using iTunes.
Thanks,
Matt M. -
I am trying to restore my Iphone but get a message that reads "The Iphone "Iphone" could not be restored. The device cannot be found.
Can anyone help?
Thank you.That screen indicates that you need to connect the iPhone to your computer with the USB cable and restore from iTunes
Allan -
I have a new Mac Book Pro, I loaded my enterprise email on the system and it was working fine, but yesterday when I tried to send out an email I received a message that ask to pick another outgoing mail server. So I chose Gmail and it was sent. Is this a common problem when using the email on a wifi system?
Thanks
StephenAre you sure your enterprise email was up and running at the time you tried to send? Are you sure you were connected to you wifi network and not another wifi network when you tried to send?
-
pleasee help i need music on my iphone
Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I've been encountering problems with this from the beginning, when I realized that my iTunes media folder was engulfing most of my storage. I bought an external drive, followed all the steps, and since then I've lost 1 movie and several songs, and now I've lost some magical file that means I can't move anything now. The files are still on my computer (I moved them back after losing the movie and songs) and I can't move the media files. It does create the folders for me all the way down to the artist and album BUT when I open that last folder it shows me NOTHING! please help this is incredibly frustrating.
1. delete this songs from your liblary
2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary -
My Mac laptop was working very slowly. I closed it but I can't re-open the version I had. I tried to move it to the trash and download a new version but, I keep getting the same message. How can I get rid of this copy and get back to work????
See:
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding -
When I open Facetime, I see a blank screen now- no contacts or numbers. How do I add this email address to my account? Thank you.
I have also noticed the same "problem". I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.
-
I've tried looking at all my settings, adding tags, etc. No luck. Any ideas?
Hi pakbecker,
Please try updating to Acrobat 11.0.7 and check.
In case you still face issues, i would like to have a look at th doucment.
Send me an email at [email protected]
Regards,
Rave -
I have no idea how to create a new profile, The links that the other people say to go to do nothing for me. Where is the profile wizard? So I get that message when i try to open it and it started after that last update my HP went through. I can't even download a new firefox, but i was able to uninstall and reinstall while in safe mode. Do i have a virus or am i just not very computer smart here...HELP!!!!
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Recovering_a_missing_profile
Maybe you are looking for
-
Message Driven Bean deployment problem in SAILFIN b12
Hi, I am a fresh learner in EJB technology and have been experiencing a deployment problem while attempting to deploy a very simple message driven bean, that does nothing basically, to a SAILFIN (b12) application server instance. I am using NetBeans
-
Problem getting IMac G5 1.6 17" OS X10.3.9 to load...
On the Topic on Operating Systems I asked how to upgrade my OS 10.3.9 to 10.4 Tiger. I purchased the incorrect discs and they would not load in my computer. I now understand what discs to use. However, since I attempted to load one of the disks and w
-
Standby Database ASM Disk Groups
Hi Guys I wonder if anyone can tell me - does a standby database have to have an identical configuration for its ASM Disk Groups? My production database has two disk groups, one for data and the other for temp. Can I get away with a single diskgroup
-
Problem in triggerring EDI idoc for Purchase order..
Hi experts, I am trying to create an outbound EDI IDOC for a PO. I have configured the partner profile in partner type LI with message type ORDERS in outbound parameters. I have created a new output type ZEDI for EDI, and entered in a message control
-
The C-Language dll which I have for an instrument is working good in LV2009 without any errors, but in 2011 it throws 1097 Error code. In this link, it is mentioned that calling convention in "Call Library Node" is changed since LV2010 which I guess