I failed to Confirm Security Exception for a site confirmed to be trusted, but apparently only supported by Internet Explorer, and am now barred from the site, so how do I access it?

I have been successfully accessing a secure site using a Citrix plugin. The security certificate for the site was renewed on 17 September and is valid, but is apparently supported by Explorer. When I accessed it today, Firefox reported it as Insecure. I attempted to bypass the Firefox block, but must have failed to Confirm Security Exception, so that my access is now denied as I 'have said this is not a trusted site' (error 183). Is there any way I can now access the site.

Thank you for your reply.
My problem isn't removing my log-in name and password for a site.
The problem is I already had the log-in name and password saved by FF, but I was required by the site to change the password. FF did not recognize that it had changed and refuses to prompt me to save the new password.
After several attempts to force the prompt, I deleted the site from the Saved Password list, hoping that the next time I entered my log-in name and password on that site FF would ask if I wanted to save both. That did not happen even after exiting FF and relaunching it.
So, right now FF will not save my log-in name and password for a site that it used track for me. Given the complexity of the new password, I really do not want to manually enter it every time I use the site.
Regards.

Similar Messages

How do I delete a Security Exception from the list of items where 'Confirm Security Exception' has been selected?

I looked at all the previous solutions, some of which were the same., but they didn't answer my question.
Firefox 17.01
Ubuntu 12.04
If I go to
Edit --> Preferences --> Advanced --> Encryption
it looks like 'View Certificates' is the likeliest place to look for the Security Exceptions resulting from me clicking 'Confirm Security Exception'.
I have looked at the five tabs on the next dialog box 'Certificate Manager', and the most likely looks like the 'Servers' tab.
On this tab, I can see that there is a button to 'Add Exception...', but nowhere to 'Show Exceptions', and the 'Add Exception...' button only provides means to add a new exception.

Correct: you can find the exceptions under the '''Servers''' tab. Unlike other entries, your custom exceptions should have the '''Server''' column filled out; this should make them easier to locate. Select an entry, then click the '''Delete...''' button.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

In Firefox 4.0 with a Server with a self signed certificate using IPv6 I can not add a "Security Exception" for this certificate.

In Firefox 4.0 I have a server ... it contains a self signed certificate. Using IPv6 I can not add a "Security Exception" for this certificate.
1. I log onto the server (using IPv6). I get the "Untrusted connection page" saying "This connection is Untrusted"
2. I click on "Add Exception.." under the "I understand the Risks" section.
3. The "Add Security Exception" dialog comes up. soon after the dialog comes up I get an additional "Alert" dialog saying
An exception occured during connection to xxxxxxxxx.
Peer's certificate issuer has been marked as not trusted by the User.
(Error code sec_error_untrusted_issuer).
Please note that this works in Firefox 3.6.16 (in IPv4 and IPv6). It also works in Firefox 4.0 in IPv4 only IPv6 has an issue. What's wrong?

Exactly the same problem, except I'm using FF v6 for Windows, not FF v4 as for the lead post. This is for a self-cert which IS trusted, although the error message says it isn't.

I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

unfortunately the do_not_trust certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

C Stamp On the "Add certificate Exception" warning, what to check to keep Thunderbird's security default: "Confirm security exception" or "Cancel?"

When the dialog box "Add certificate exception" comes up with the warning "You are about to override how Thunderbird identifies this site," which is the safe box to check?
I want to stay with Thunderbird's security system. Do I check "Confirm Security Exception" or "Cancel"?

Unfortunately, some sites do not maintain their certificates properly. So basically if you trust the site, you can confirm the exception. If it is an unknown site or you are not sure about it, then Cancel. Of course if you don't confirm the exception, you won't be able to see/use the site.

Having trouble with the security questions for iTunes. Tried to reset them, but the mail from Apple never comes . . .

Having trouble with the security questions for iTunes. Tried to reset them, but the mail from Apple never comes . . .

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96290)

I have forgotten my security question answers, i have tried to reset them but it keeps saying i need to save changes before i leave the page, i try to but it does nothing. help?

i have forgotten my security question answers, i have tried to reset them but it keeps saying i need to save changes before i leave the page, i try to but it does nothing. help?

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

I cannot play some songs on itunes, I get a prompt for an old email address which not longer exists and I don't know the password. HOw can I get them authorized to my new email address and password?

I cannot play some songs on itunes, I get a prompt for an old email address which no longer exists and I don't remember the password. How can I get these tunes transferred to my new email address and password?

In one of the help pages for managing your Apple ID (http://support.apple.com/kb/HE40), it shows two separate sections, one for Apple ID and one for Primary Email address. When I go to manage my Apple ID, I see only a single section for both. Can the two be 'separated', especially when you face the situation of having to discontinue your email address for some reason?
I also noticed that when navigating to Apple ID Support Communities, it shows my nickname 'dishdy'. How and when did I insert this? In the current sequence for creating an Apple ID I don't see this. In my current profile I don't see this.
In any case, I have freed myself from my previous Apple ID (@artemis.it) on my iPhone.
Thanks for your help.

I was warned and I went straight to the site and they were gone. I didnt was any time. Either way, there should be a way to either store or restore such items. Have you ever lost pictures that were so important to you that you couldnt sleep or eat for...

I was warned and I went straight to the site and they were gone. I didnt was any time. Either way, there should be a way to either store or restore such items. Have you ever lost pictures that were so important to you that you couldnt sleep or eat for some time. I have and it wasnt fun. I'm glad that you were able to get yours unlike some of us.

I am still wondering why iTunes tries to confuse me every time I try to make changes in my preferences, telling me that I "don't have enough permissions", although I am the administrator.
That's clearly a fault. Whether it's an iTunes problem or a Windows problem I can't say at this time. If you search the Using iTunes for Windows forum for "permissions", you should find threads that can help you sort out this problem.
Then, changes to the format are not obvious, and I get no notice that I am burning music files as data.
If you click on a playlist and look at the lower-right of the iTunes window, it says right there what format it will use to burn the playlist.

For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup.

For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup. Setup installs iTunes in the 32 bit application directory (Program Files x86) - it's not all that unusual to run a 32 bit app under a 64 bit OS - BUT whenever I connect any of my iPhones, I get an error message that say I cannot use the iPhone because the 64 bit version of iTunes is not installed. The message then tells me to de-install iTunes and to install the 64 bit version.
Like I say, the 64 bit Setup version is selected for me, and it runs error-free, but I seem to have no control or ability to force the installation of a 64 bit iTunes app. And all the iPhones are inoperative with the 32 bit version I have. I have another PC, which I have held at an earlier iTunes release. Although it's a notebook, it's identical in every other way (OS & installed utilities and apps) to the desktop that has developed the problem, and my iPhones work fine with it, although iTunes on it is at the earlier release, and I have no intention of upgrading that version until I understand and have corrected the problem.
Any ideas or suggustions?
Thanks.

This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.
That usually indicates that your Apple Mobile Device Support has not installed. That's also what is being shown by the diagnostics (the driver is there but the application isn't).
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

My mini Ipad says I haven't backed it up to iCloud for 2 weeks. Back ups happen when this ipad is plugged in, locks, and connected to wifi. The ok button doesn't work, I can't open settings to make sure wifi is connected. Nothing works!!!

My mini Ipad says: I haven't backed it up to iCloud for 2 weeks. Back ups happen when this ipad is plugged in, locks, and connected to wifi.
The ok button doesn't work, I can't open settings to make sure wifi is connected. Nothing works!!! I have it pluggled into my computer but apparently it isn't backing up since nothing has changed. it is unuseable!

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My Adobe X! trial expired I paid for a month to month subscription on MArch 13, 2015 but I could not activate it. The prompt is asking me for a serial number (which I wouldnt have since I downloaded the trial from the website. How do I activate it with my

My Adobe XI trial expired I paid for a month to month subscription on MArch 13, 2015 but I could not activate it. The prompt is asking me for a serial number (which I wouldnt have since I downloaded the trial from the website. How do I activate it with my Adobe ID? "activate with Adobe ID" is not an option on my screen. It only asks me for the serial number.

uninstall your acrobat XI.
if win os clean, Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
then dl the desktop cc app and use it to install your subscription acrobat XI, Creative Cloud Help | Creative Cloud for desktop

I failed to Confirm Security Exception for a site confirmed to be trusted, but apparently only supported by Internet Explorer, and am now barred from the site, so how do I access it?

Similar Messages

Maybe you are looking for