I feel 8.02 is less responsive and has higher latency!

After installing 8.02 and 10.5.3, Logic feels less snappy, has higher latency and has graphical glicthes when a big project is loaded.
Also, when recording in loop mode and when the playback cursor goes back to the beginning of the loop, the recorded notes are all messed up (like Ableton Live)
Also, when dragging a selection in the arranger, the (dragged) selection jumps all the way up or down? (bug?)
8.02 has various other tiny glitches.
Also, the Sculpture synth uses way more CPU since the update!
Good thing: projects load up extremely fast
I have no problems with the Overload Message but then again, I never saw them, ever in 8.0 or 8.01
I did a repair permission before and after each update (update OSX, Logic and Apogee Duet) and flashed the PRAM after all the updates.
I do not use third party plugins.
What am I doing wrong? Because I read all good things about the new Apple updates. However, I am not experiencing them, except for the faster loading times

I have the same latency problem since updating, and only in Logic (not Cubase). I reduced the midi latency when I uncheck, "Universal Track Mode," which is supposed to remain checked, in Audio pref., and turning off any sends on that track while recording.
Now there's a whole new problem of rerouting outputs to high number Double busses (bus 29-30) that never existed before when I reopen a project or start a new one from a template.

Similar Messages

Super Slow speeds and extremely high latency

This is my last attempt with Verizon high speed DSL (the only service they offer here). I have been dealing with them for months about my slow connection speeds and high latency. Finally, after a new modem, supposed line monitoring and a two tech visits the last tech found noise in the line and fixed some of my issue. Now my speed and pings are good EXCEPT during peak hours (M-F 12 pm -1 pm, 3 pm - 7 pm and Friday and Saturday 7-11 pm). During these times m Internet becomes completely unusable with download speeds of 0.25 MBps and pings over 400 ms and today I had a pint of 1713 ms!!! Clearly there is an issue here.

Hi schichler,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Latest flashplayer not work well, even the early version in 11x and has high CPU usage

why is it that flashplayer 11x always has a High CPU Usage? detected by NOrton Antivirus

you can't rely on norton antivirus.
but if you check your active processes and directly confirm a problem with flash player 11+, uninstall your current flash player (http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html or http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html) and install an older version: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

Mine is i-phone 4 16G. Feel so sorry upgraded to IOS 7.0.4 which slow down my phone dramatically and less responsive with the touch screen. And in times it frozen on me, the worst. Anyone has the magic wand to downgrade the IOS back to 5 o 6...

Mine is i-phone 4 16G. Feel so sorry upgraded to IOS 7.0.4 which slow down my phone dramatically and less responsive with the touch screen. And in times it frozen on me, the worst. Anyone has the magic wand to downgrade the IOS back to 5 o 6...

There is no way to downgrade to a different iOS. Apple does not support downgrading. See this link regarding speeding up the iPhone 4. http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

2 finger scroll doesnt work in Finder after Mavericks update. Macbook pro seems slow and less responsive after the update.

2 finger scroll doesnt work in Finder after Mavericks update. Macbook pro seems slow and less responsive after the update.

nateshns wrote:
2 finger scroll doesnt work in Finder after Mavericks update.
In any particular app, or all of them?

My iphon 4S and iPad 2 screen have become less responsive since I've updated to IOS8

Hi,
Since updating my os to IOS8 I have found that the touch screen on both my iPhone 4S and my iPad2 have become less responsive to gestures. They have also become laggy when performing commands.
They are two distinct issues though. I have noticed the decreased sensitivity most when logging in with my pin code. I hardly ever had to enter my pincode more than once because i missed a digit but now im doing it all the time. Also when using the YouTube app the time slider is so unresponsive... and the slider when watching a fullscreen vid within safari is the same.
I expected the laggyness after upgrading as they are older models but I don't understand why the sensitivity would reduce.
Anyone else?

Try resetting the wireless router.
http://support.apple.com/kb/TS1398

Recently downloaded Mac OS X Mavericks and Safari has become noticeably less responsive; slow to load web pages. Also, when Safari is open, the Finder randomly comes to the front. Any ideas?

Recently downloaded Mac OS X Mavericks and Safari has become noticeably less responsive; slow to load web pages. Also, when Safari is open, the Finder randomly comes to the front. Any ideas?

In fact, I am runing some plug-ins: ClickToPlugin (Flash blocker), Collusion and Disconnect.
There is quite a history of new versions of Safari breaking third-party plug-ins/extensions becasue the plug developer did not have an updated version available by the time the new Safari version dropped. What you report--worked fne before but won't now--is exactly what history says happens in such a case.
First, turn off all third-party stuff and see if Safari smooths out. Alternatively, create a new user account and, from there, test Safari in its native state with nothing added. That is a good diagnostic to see if the issue is a plug or extension.
If either of those helps, check for updates to the add-ons. If the developer is slow in reacting to the updated Safari version, (not unheard of), stop using that extension until an update is available.

Dear.. I have recently installed Mavarick software and after installing it my menu has become less responsive.. the icons which used to slide fast now just drags hard.. pl suggest

Dear I have recently updated the free software version of OS Mavericks and after installing it my menu bar has become less responsive. Previously it slided very smoothly to show all the applications but now it drags and i have to slide it many times to see all the applications. It has become very slow. Pl suggest

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

FH is less responsive on new iMac

Hello all,
I have a new iMac and I find that FHMXa is less less
responsive than on my
old G5. There is a slight delay when selecting points and
object, and also
when moving them. Does anyone know is there is a "fix" for
this?
Thanks
Wasn't Mel Gibson screaming FREEHAND at the end of the movie
Braveheart!

Colin,
I am using Leopard and it's all up to date. The iMac has 4GB
of ram. Even
so, FH runs less responsive than on my old G5.
in article fs64q8$8u3$[email protected], Colinbrowne at
[email protected] wrote on 3/23/08 12:42 PM:
> Hi Bruce,
>
> I take it you're using Leopard then? I recently bought a
new Macbook with
> Leopard and Freehand is running fine on it. Have you
tried doing all your OS
> updates? That's the first thing I did.
>
> I'd be interested to know if it helps, also I would
recommend bumping up the
> ram to maximum which I think is 2G on the iMacs, it'll
cost a bit but the
> difference is astounding.
>
> Cheers,
> Colin

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

2.1 EA1 - Auto-complete less responsive

I've noticed that when typing select statements with 2.1, that the auto-complete popup is less responsive as compared to previous releases. Even with something like:
select * from s
...will sometimes give me a list of tables/users begining with s...needing the shortcut key to display results. And rather than zeroing in on potential results as I continue to type, the auto complete window goes away.
select * from sy
produces no popup, but still shows popup with ctrl-space. Once I get the full owner and period in there, it the auto complete window will come up again (sometimes only with aid of shortcut key again)...
select * from sys.
Rather than narrow down on views as I type, the results go away....even with the shortcut key
select * from sys.d
gives me no popup and none with the shortcut key. Prior versions I'd at least get (dual, dba_views, etc), and it would almost continually narrow down results as I typed.

Fixed broken synonyms query which logged the error.
Code insight no longer holds the GUI thread, therefore if it is unable to list suggestions in some time threshold (0.6 sec), then nothing is displayed. However, if you explicitly invoked code insight (with ctrl-space), then the threshold is considerably higher (3 sec). Please keep in mind that the goal to have all code insight dictionary queries under 0.5 sec remains elusive (because of dictionary complexity).
There are some other changes in 2.1. Code insight is no longer zeroing in on potential results. Consider
select * from apps.<ctrl space>
the list would be thousands items long! In situation like this code insight runs top 50 query, and fetches only the first 50 items of each category. (This also helps performance). Narrowing down the list of top 50 items is going to confuse the user, this is why we don't do it anymore, and retrigger the whole query. Perhaps, this magic number "50" should be configurable... One of the reasons why code insight in 1.5 sometimes was little faster because this limit was set to "20".

Partial-credit scoring in multiple response and multiple hot-spot questions

Hello everyone,
I'm calling on your generosity in the spirit of the holidays to help out a noob. I would like to create matching, multiple-response and multiple-hot spot questions where the user receives credit based on the number of correct answers within the question. For example, in a matching question where there are four items; if the user gets 2 out of the four items matched correctly, I would like for him to receive 2 out of 4 points.
I understand that Captivate doesn't support partial-credit scoring of this type, but a few posts have implied that it can be done with variables. Is there anyone who can walk me through this process, or send me to a link that will walk me through it? (I've scoured these forums and tried the Cp tutorials, to no avail.) And if it's not asking too much, please make it understandable to someone who has very little experience with variables.
Thanks, and Merry Christmas.
JR
(Running CP 5 on Windows Vista)

Hello,
I did publish an article more specific on partial scoring, perhaps this could help you:
Partial scores and customized feedback
And since you are asking for more basic information, on my blog I point to some other articles to explain the meaning of variables with/without advanced actions. Feel free to have a look (there are more postings about advanced actions and links to articles over there):
Curious about variables ?
Unleash the power of variables with advanced actions
Lilybiri

System less responsive after udev/kernel upgrade

Yeah, another udev/kernel upgrade question. After upgrading udev and the kernel yesterday my terminal is less responsive. For example, scrolling is slow and jerky, and uses an inordanite amount of cpu. ls /usr/bin will cause the cpu usage to spike ~70% which is much higher than normal. I can cause the cpu to go to 100% by scrolling quickly in vim. I do not see this in firefox, however. Scrolling there is responsive and does not use any additional cpu beyond what it took before the update.
I really don't know where to start to troubleshoot this - the only thing I have noticed is that the speedstep-centrino module is not loading any longer.
pmorris@arch:~ $ sudo modprobe speedstep-centrino
FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.15-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): Device or resource busy
This is on an ibm thinkpad T40p. I am still getting cpu scaling, but the system is generally less responsive. It may be taking longer to scale up the cpu frequency on demand. Any help is appreciated. Thanks.

tpowa wrote:perhaps a bug in how udev loads the cpufreq modules. can you tell me which modules you would need? then just blacklist the modules you don't need...
Thanks, this worked. Prior to the upgrade I was using the speedstep-centrino module, and loading it in the modules array in /etc/rc.conf. After the upgrade the acpi-cpufreq module was being autoloaded at boot prior to my trying to load the speedstep-centrino module, hence the "device or resource busy" failure when I tried to load the speedstep module. After blacklisting all modules listed in /lib/modules/2.6.15-ARCH/kernel/arch/i386/kernel/cpu/cpufreq except the speedstep-centrino, things are working fine. The correct module is loaded at boot time.
Is there a cleaner method to achieve this other than blacklisting all unwanted modules?

Trackpad macbook pro less responsive

the track pad of my macbook pro is less responsive. the right hand side of the pad is less responsive as compared to wha

Some times a very thorough cleaning of the trackpad will restore functionality.
Occasionally a failing battery (under the trackpad) will start to expand and interfere with trackpad operation. Inspect the battery.
Here is an Apple support article on trackpad troubleshooting:
http://support.apple.com/kb/ts1449
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao.

I feel 8.02 is less responsive and has higher latency!

Similar Messages

Maybe you are looking for