I feel  a little tingling in the fingers when I touch the Ipad's back side

When I plug the iPad for charge the battery I feel  a little tingling in the fingers when I touch the Ipad's back side, Could it be a problem?

Cables can break due to flexing over time, especially at the plug. I've had that happen a couple of times. Very high chance that's the problem. 
Can you try the cable with another device?  Or borrow somebody's cable and try it with your iPad?
And for sure a genius at an Apple Store or at a retailer could test that for you no problem.

Similar Messages

  • My ipod nano 6 keeps turning off the music when i touch the sleep button

    Hi my Ipod nano 6th keeps turning off the music when I touch the sleep/wake button.
    What should I do?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback when the screen turns off to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    i

  • TS2634 my 8g ipod generation 4 works but my sceen will not light up when i plug it in the computer reads it and i can hear the apps when i touch the sceen

    My ipod touch 8g has a black screen. I know that it works because when I pull it into the computer it connects and reads it also makes sounds when I touch the screen. Someone please help I don't want a $200.00 paperweight.

    have you tried to reboot or restore?

  • Please help - cannot get into any of the icons, when i touch the icon it makes a square round it but won't go into it. Tried restarting and rebooting it but no change.

    Please help. Since yesterday whenever i try to use my ipod touch, all the icons won't let me enter the app. Every one whenever i touch it just shows a faint square round the icon, and it won't access the item. Tried re-starting & re-setting but it hasn't fixed it.

    Are some of your accessiblity features activated?
    Each accessibility feature can be turned on or off in Accessibility settings on iPod touch. You can also turn some features on or off in iTunes when iPod touch is connected to your computer.
    Turn on accessibility features using iPod touch: Go to Settings > General > Accessibility.
    Turn on accessibility features using iTunes: Connect iPod touch to your computer and select iPod touch in the iTunes device list. Click Summary, then click Configure Universal Access at the bottom of the Summary screen.

  • My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?

    My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?

    Anything?

  • I want to switch dashboard and desktop positions when I touch the trackpad by 3 fingers and go up. Is there anyway to do that?

    I want to switch dashboard and desktop positions when I touch the trackpad by 3 fingers and go up. Is there anyway to do that?
    I tried to drag and drop but unfortunately that didn't work as well.
    I am using mac pro without retina.

        Ambersikes17, we don't want you to cancel your service. Let's get your phone working properly. Are you using the original charger that came with the phone? If so, does it the phone respond to the charger if it is positioned in a different manner?
    Have you noticed if the freezing occurs with certain actions like messaging or using an application? Are these issues that you have had with all of the devices or just your current phone? Have you tried using your phone in Safe Mode? http://vz.to/1d0SZSq
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

  • Everything on my screen, Mac Pro, shrunk!  Gmail, bookmark pane, task bar menu, even the password sign in. I'm sure I did something with the fingers thing. How do I get back to defaule

    Everything on my screen, Mac Pro, shrunk!  Gmail, bookmark pane, task bar menu, even the password sign in. I'm sure I did something with the fingers thing. How do I get back to default.  The font is tiny, tiny.  My operationg system is Mavericks.

    Thank you for the list, I will print and keep it handy.
    Contol F3 makes my whole screen larager or smaller. 
    Command option 8 does nothing that I can see.
    Command  option + or -  will zoom in or out on the page I am on but if I change windows it reverts.
    But bookmarks pane, the task bar, the password sign in and even the post I am writing (actually every printed word), are a font so small I almsost need a magnifiying glass.  This includes web pages too!
    I am using Mavericks. 
    Trying to retrace my steps when this happened.  Nothing unusual, I was using airplay to watch a You Tube segment on the tv.  I don't think that is related.
    I really appreciate your help and comments on this.  I can usualy google and find and answer, but to no avail with this one!

  • Why is there a thin vertical line on the copy when I use the feeder?

    There is a thin vertical line on copies when I use the feeder but not when I copy from the glass. The copier is new. Any ideas?

    Hi Ccorning, When a vertical line (top to bottom) is produced only when using the feeder (ADF) of your laser product, the issue would actually be due to a small mark or debris on the scanning glass area that sits directly under the left panel cover of the ADF.  This occurs because as the paper feeds through the ADF and across the scanning area, every inch of the paper passes over the small mark which gets picked up by the scanner.  This then produces what looks like a line.  However, thorough cleaning can resolve the issue. You can clean the platen glass and the underside of the ADF by following the procedure below. 1.  Turn OFF the Main Power Switch and disconnect the power cord. 2.  Open the ADF. 3.  Clean the ADF scanning area on the left side of the platen glass and the same area on the lid (the area that would touch the scanning area when the lid is down) with a cloth dampened with water.  You will want to carefully and fully clean the glass in the ADF scanning area.  Look for scratches, tiny spots and marks of any sort.  If marks are noticed, you may have to clean the platen glass up to three times or more depending on what created the mark (i.e.. correction fluid, pen ink).  You can use a soft lint free cloth either dry, with glass cleaner or water to clean the glass and may have to scrub until it squeaks to remove certain types of marks.  NOTE: Please spray the cloth with the cleaning solution and not the glass.  Another way to ensure the mark is removed is to use a credit card by placing in on a angle and sliding it across the glass in one direction.  The plastic of the card will not scratch the glass.  You can then lift the credit card when reaching the end of the glass and return to the other side to slide it across again.  Then wipe the area with a soft, dry cloth. 4.  Close the ADF. 5.  Reconnect the power cord and turn ON the Main Power Switch. Caution:  Be careful not to get your fingers caught. After cleaning the glass, run 4-5 blank/clean pages through to test it.  If the thin black line still appears, please try cleaning the scanning area again as a mark on the glass is the only cause for this.  If the issue persists, there may be a scratch in the glass which would require service. If further assistance is needed, please feel free to Contact Us.

  • How to deselect the text when I start the program?

    how to deselect the text when I start the program?
    photo:

    wants the blue background could not be seen:
    Code Form:
    Public Class Form2
        Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        End Sub
        Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
            If ComboBox1.SelectedItem = "The Sims 4" Then
                Form3.Show()
            Else
            End If
            If ComboBox1.SelectedItem = "The Sims 3" Then
                Form4.Show()
            Else
            End If
        End Sub
    End Class
    There's a lot wrong with all of that.
    I'm sorry that I won't be able to help...
    Still lost in code, just at a little higher level.

  • Recently my ipad started doing an odd thing.  When I go to Google the keyboard pops up, but then pops down again, when I touch the google bar the second time it comes up and stays up.  Why would it do that, anything to do about it?

    Recently my iPad started doing an odd thing.  When I go to Google and touch to type something the keyboard appears, but immediately disappears.  When I touch the second time the keyboard comes up and stays up.  Any idea why it is doing that and anything to do about it?

    Did you try rebooting the iPad? It can cure a lot of really simple little hinky issues.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Am using provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down bef

    I  am using 2 unit provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down before continue to charge my iPad mini again. Of course it will be 100% charge but must make sure the AC charger is cool down completely. 
    I feel that the provided AC charger that is not suitable for our charging on iPad mini.

    I would book an appointment at an Apple Store, if you have one nearby, to have it looked at.
    Genius Bar: Preparing for Your Apple Store Appointment

  • My report is printing half of the page when I print the report Hp psc 1315

    My report is printing half of the page when I print the report in this printer
    Hp psc 1315 all in-one and when the operating system is windows xp , but when
    I run the same report in windows me , and the same printer it is running well
    And my report version is :
    Report Builder 6.0.8.23.0
    ORACLE Server Release 8.0.6.0.0
    Oracle Procedure Builder 6.0.8.20.0
    waiting for your valuable answer .
    Best regards
    Jamil alshaibani

    i would like to now if there is any additional software required for the windows xp and oracle report to solve this problem
    please help
    betst regards
    jamil alshaibani

  • Suddenly 2 of my apps (Facebook and Skype) will not function on my ipod. They just close down when I touch the ikon.

    Suddenly 2 of my apps (Facebook and Skype) will not function on my ipod touch. They just close down when I touch the ikons.

    If that does not work try resetting your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • How do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?

    how do i edit my billing info if my credit card associated with apple id expired and i have a duty to app store from the time when i had the old credit card?
    so the thing is a few days ago i made an app store purchase and i didn't know i was running out of money on my credit card. i realized that only when i tried to purchase another item and it didn't work. nothing special til here. the problem is that meanwhile my credit card was replaced by a new one by the bank because the old one was soon expiring. So the data associated with the old credit card no longer exist.
    i tried to edit my billing info associated with my apple id in order to enter the new credit card data, but the system doesn't allow me to do that.
    so i can neither pay my purchase, nor edit my info, nor access app store anymore.
    what's next? any ideas? thanks

    Servers down wait till status is fixed to change or add your data http://www.apple.com/support/systemstatus/

  • In the Calendar there used to be the daily activities listed at the bottom of the page when you had the monthly view on it

    In the Calendar there used to be the daily activities listed at the bottom of the page when you had the monthly view on it.
    For example you could see the whole month, the day you select was highlighted and at the bottom of the page listed any activities.
    Now this does not happen. Am I missing something?
    The Calender seems to have gone backwards!!!
    HELP!!!
    PLEASE!!!!

    Ditto!  I have always preferred the month as the default view and the list at the page bottom let me know what I need to pay attention to for today (or tomorrow, or any future date).  Having to scoll through every hour of the day to find items that may or not be there is a huge waste of time!
    I hate this calendar!!!!  I've been okay with other changes in ios7 but they need to make changes.  How about letting us configure our own calendar views?  Choose "home" page look by month or week, itemize daily view by hour or by items entered, etc.

Maybe you are looking for