I feel like crackling sound if i listen to music on my ipad

i feel like crackling sound if i listen to music on my ipad...

I've been using the H2O Audio earphones for about five years. They're amazing. I use them with a waterproof Nano case and listen to audiobooks in the hot tub! They work equally well on dry land and have the standard earphone plug.
They will laugh--laugh, I tell you--at a little perspiration.
http://www.amazon.com/H2O-Audio-Surge-Waterproof-Headphones/dp/B001F8SAK8/ref=sr _1_2?ie=UTF8&qid=1307314518&sr=8-2
But, don't let perspiration--or any liquid--get into your iPad. Protect it in a ziploc bag, or if you want to get really fancy, modify one of these CleverWraps:
http://www.ilounge.com/index.php/reviews/entry/cleverwraps-for-tablets-apple-ipa d/

Similar Messages

Cannot hear headphones in stereo. Feels like mono sounds.

After using this youtube example (https://www.youtube.com/watch?v=hTvJoYnpeRQ) to determine if my headphone is working or not I noticed that I can hear the left channel on the right side of my headphone and the right channel on the left side of my headphone (Essentially, I can hear both channels with just one side of the headphone). This is irritating me as when it comes to some games (Such as Counter-Strike: Global Offensive where listening and determining where noises are coming from), it is crucial to learn where the sources of the audio is coming from. This even happens when I listen to music and I get confused if it's from the left side or the right side of the music when the music I listen to does take advantage of 2+ channels. I have tried it on my old laptop and it can listen to both channels seperately, just fine.
The laptop I am using the HP Envy 15-j058ca and I currently have the latest audio driver on it for 8.1 with the latest Windows updates. Is there something I can do to be able to listen the left and right channels on proper sides instead of hearing it as if it was mono? Thanks in advance!

Please try to update the PC's audio driver if you haven't done so already.
Link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...
Once installed go to the audio control panel or click on the little sound icon on the bottom right corner of your screen and click on the little Speaker/Headphone Icon above the volume slider.
Once you do that, you will get a window like the one below with General tab highlited.
CLick on the Levels tab and then click on the Balance Button. Move the sliders to check if there is actually an issue with the RIght or Left channels and if the correct channels respond when you move the individual sliders.
Also try with another Headphone.
I'm an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Click on Thumbs up if my post helped you.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

Can someone recommend me a good creative sound card for listening to music

Hi all,
I am thinking to buy a Creative sound card for my new PC.
I have browsed the Creative web site but found out that there are just too many options for me to choose from, like X-FI, e-MuRecon3D Fatal1ty Champion, Recon3D PCIe, E-MU 1212M PCIe.
I have no idea which one is the best for me since I like listening to music.
Please give me some advice.
Thanks
Kitty.

It's ultimately going to depend on how particular you are, and what output you're going to be using.
Arguably the X-Fi Titanium HD will give the clearest output of the whole lot. A measurable 122dB SNR means you'll basically have to turn it up to the threshold of pain before you'll hear any noise produced by the card itself. That doesn't mean there won't be any noise at all in the output - just that the card realistically won't add any that didn't already exist in the source material. Further to this, when run in Entertainment mode you'll also have access to the THX enhancements over the standard Creative ones, which I personally find to be substantially better in actual listening. The EMI shield and changeable op-amps are just gravy.
Of course, there's always fine print. The 122dB SNR only applies to the front outputs, for example. That's not to say the rest aren't very good - they're rated at between 115dB and 118dB - just that they aren't as good. Odds are you won't really care but its still worth mentioning. The other major limitation (in my opinion) is the absence of a good headphone pre-amplifier, but that may or may not be a non-issue depending on whether you use headphones or already have an external one (or, like me, you feel inclined to make your own to solve that limitation).
The other good option would be the Recon3D. I wouldn't bother going with any of the upper market ones for music (or for any reason, for that matter) unless the front drive bay or directional microphone are of any particular importance to you (NB I bought the Fatal1ty Champion edition - still not entirely sure why). An argument could be made for the EMI shield, but with so few components on the board it probably isn't stopping a whole heap of noise anyway over the miniature "shield" on the SPU itself. When compared in raw specs to the Titanium HD, at a glance it would appear to be vastly inferior - 102dB SNR ratio (albeit constant across all outputs) is quite a bit lower, after all.
However, it's important to keep in mind exactly what that means. 102dB SNR still means you'll have to turn the volume up quite a bit to get any extra noise added to your output. You're talking around the volume of a power saw at a little over 3 feet, so realistically it's quite loud - and it's over the level which is generally considered to cause hearing loss with sustained exposure (95dB). You also have to remember that this doesn't apply to the S/PDIF outputs (nor does the HD's 122dB) since they're entirely at the mercy of whatever decoder you're using, so if you're using that output than the extra expense of the HD is pretty much entirely wasted. And, as a major plus, all Recon3D cards have what seems to be a pretty decent headphone pre-amp, which makes a very appreciable difference in listening, as well as supporting the various THX enhancements.
The short version:
- If you're listening mostly via stereo analogue speakers, get the Titanium HD.
- If you're listening mostly via headphones, get the Recon3D (I personally think the pre-amp is better than the higher SNR).
- If you're listening mostly via S/PDIF to an external amp, it doesn't matter (but get the Recon3D because it's cheaper).

Listening to music on the iPad

I get that this will seem like an utterly ridiculous question but how the heck do I listen to the music on my iPad? From my iTunes app on my computer, it appears that I have all my music sync's with the iPad but I guess I have a low IQ because I can't figure out how to actually listen to my music from my iPad. Thanks in advance for helping out a knuckle dragger.

You might find the iPad User's Guide for iOS 4.2 helpful:
http://manuals.info.apple.com/enUS/iPad_iOS4_UserGuide.pdf
The older version is still available if you haven't upgraded to the new OS yet. Just click on the Support tab above, then select iPad, and go to the Manuals section.
Regards.

I have good headphones and would like to be able to listen to music louder and possibly with better quality audio. Any advice?

My old iPad had the 30 pin line in and I had an LOD cable which I ran to a headphone amp. This allowed me to use the headphone amp to control volume independent of the iPad as it was docked through the LOD. This made it louder and sound better than simply using the headphone line in of the iPad. I don't know how I can do this with my iPad Air 2 as I don't know of any cable that would connect into the 8 pin line in. I've looked for LODs to fit the 8 pin but can't find one. I bought a cheap 8 to 30 pin adapter but it only allows me to charge and sync, not dock. Does anyone have any suggestions?

The apple lightning to 30 pin works just fine for me.
Works with a fio amp and srs iwow.

I have a new laptop and would like to know how to get my music from my ipad to my dell laptop?

I have a new laptop and need to know how to get my downloaded music from my ipad to my new laptop?

File>Transfer Purchases
You should just copy everything from the old computer, or your backup copy of the old computer, to the new one.

When I listen try to listen to music on my ipad it starts skipping though the whole playlist, how can I stop this?

Help Please

Then RESET:
• Press & hold both Home and Sleep/Wake until the red power-off slider appears
• Continue holding both down until that display goes away, replaced by the whilte Apple logo on a blank screen
• Let the normal boot process continue and, once up again, try your app.
(And I guess I don't have to say that all I'm doing here in paraphrasing what's in your User's Guide, do I?)

Is anyone else having sound cracking in their ipad 3 like static when listening to music if so what's going on?

Lately my ipad 3 has been sounding horrible when listening to music and videos its like static or cracking what's going on someone please help me I don't wanna make a trip to the apple store if other people are having the same problem !

I have the same problem with my new iPhone 4s in a new BMW 328i. My old iPhone 3GS, iPad touch and Zune have no problem with aux.

Can I listen to music from my iphone 4 using an in-ear bluetooth set?

Hi,
I'm looking to buy an in-ear (mono) bluetooth device.
I would like to be able to listen to music from my iphone through the device.
Not looking for something fancy.
What specs do I have to look for? Version 2.0? A2DP? Any specific models recommended?
Thanks

A2DP is a Bluetooth profile. If both Bluetooth devices have that profile, then they can share information in that way. See here: http://en.wikipedia.org/wiki/Bluetooth_profile

Why does iPad go to sleep when listening to music?

Tried listening to music on the iPad last night, but after a few minutes it just stops playing. I didn't think this should happen.
Any suggestions?

Start Here Ipad User Guide

How to add certain tunes I feel like listening to, to a temporary playlist?

Hi,
As with WMP, where if you double click on a track it will begin playing and then stop at the end, how can I do this with itunes?
Or how can I add say 4-5 tunes I feel like listening to at that time to a temporary playlist? The Dj does not do this very well because although I can add tracks and get itunes to play them next in itunes DJ, ones they are all finished the Dj will begin playing tracks from the selected source/playlist. As far as I can see it is not possible to NOT have a playlist selected in DJ.
Thanks.

Highlight the tracks you want. Then use the command File > New Playlist From Selection. iTunes will immediately make a playlist from the highlighted tracks.

The left side of my home button is screen is kinda feel like hollow when I tap it and it makes a sound too. It is bulge,a little. I thought every ipad is hard to touch but why mine is not? Help please,what should I do?

The left side of my home button is screen is kinda feel like hollow when I tap it and it makes a sound too. It is bulge,a little. I thought every ipad is hard to touch but why mine is not? Help please,what should I do? Please I need your help.

The damage has been done then
Take it to Apple and pay for a replacement
Here in the States a replacement cost $229
Allan

When i listened my music on my ipod nano 4th, It's sound like a used LPwith the distortion. I check my earphone and it's not the problem. I reset my ipod and it's still having the same problem. Does anybobody having a solution ?

When i listened my music on my ipod nano 4th, It's sound like a used LP with the distortion. I check my earphone and it's not the problem. I reset my ipod and it's still having the same problem. Does anybobody having a solution ?

From my limited knowledge the iPod Nano has no support for iCloud or wireless transfers- therefore the only means of downloading songs is by hooking it up to the computer by the white cable.

I was trying to adjust the latency issues i was having. something happened and i hear a very loud squeal. deathening.now when i listen to playbach thru my headphones i hear crackling sounds. if i were to bounce and playback thru i-tunes, i don't hear it.

if i record w/out monitoring and playback on i-tunes. sounds great. monitoring recording thru headphones gets a crackling sound that has a bit of delay or reverb. i use tascam us-122mkII interface. help!

if i record w/out monitoring and playback on i-tunes. sounds great. monitoring recording thru headphones gets a crackling sound that has a bit of delay or reverb. i use tascam us-122mkII interface. help!

Static, fuzzy, crackling sound on brand new laptop

A static crackling sound is present when i listen to audio on my laptop. This is the second time i have purchased this laptop as the first one also had this problem and has continued with this one. i have run the sound diagnostic and no audio problems have been detected with the laptop and i have also updated the latop software but the problem still continues

Hello @jayjay124,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that a crackling sound is emitted when you are playing audio from your notebook computer, and I would be happy to assist you in this matter!
Since you mentioned that this issue has occurred on your brand new computer, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I feel like crackling sound if i listen to music on my ipad

Similar Messages

Maybe you are looking for