I feel like my internet slowed down can i fix it (WRT54GV5)?

is there a channel where i can check my speed and can i adjust it? Why is my internet connection slowing down?
Message Edited by JJbro1 on 12-07-200610:06 PM

Internet speed is a difficult thing. Checking the actual speed is difficult, in particular because the IP protocol is "best-effort" which means you have no guarantee of delivery and the speed also depends on how much traffic there is on the route to the destination. If a router on the route runs on 100% it will drop everything which it cannot handle which will slow the whole thing down, obviously. So at busy times it gets slower. Also the distance of the connections slows traffic down, e.g. trans-continental lines are slower. Basically you can just see how fast it is at the moment.
What you can measure to some extent is the speed of your connection to your ISP. The only real way to check this speed is using a speed test. Google for internet speed test and bandwidth speed test and you'll find some sites which offer a test run. The problem: for accurate measurements the site should be very close to you, ideally placed on your ISP's server. Only then you will be able to measure how fast you'll get the data through the internet connection. If it is further away many other factors on the route can influence the result or reduct the overall throughput.
If you ISP does not have a internet line speed test on its website, then ask them to add one. :-) Until then, try speed tests from servers of them. If they have a download server where you can download larger files (e.g. some documentation or larger free software packages, should be some 10MB at least), try to do that. If you have a webspace with them you could also try to upload larger files there and download them again. This should give you a good picture how fast the internet line to the ISP. Always remember to do the tests a couple of time to get an average.
To see, how far away a site is, do a tracert: open a command prompt window and run the tracert command. To check the distance of www.linksys.com enter "tracert www.linksys.com". The less hops you have the close it is and the better the results for the tests.
Also, to check how far the router slows the line down: connect the computer directly to the modem and do the tests again.

Similar Messages

  • I feel that my internet slowed down significantly.(WRT54G V5 Router)

    When i first got my dsl and my router it was the fastest thing ive seen and i downloaded in seconds and i could play online games flawlessly, well now my internet slowed down and its not me being used to the fast speed. It takes me minutes to download a song and im experiencing serious lag play games, does anybody know the cause of this and wat do i do about it?

    Compare the speed you will get when you connect the computer directly to the modem. If that is faster it is a router problem else it is simply a crowded internet connection and a problem with your ISP.

  • Internet slows down at night to less than 1Mbs, poor customer service

    I'm having the same problem. I had originally 1-3 Mbps (Oct 2008 - Jan 2012). It used to work fine but then the speed seems to be slowing down as years passed by, I was getting less than 1Mbps most of the time so I upgraded to 3-7Mbps with 2 years holding period (Jan 2012 to Jan 2014). From Jan 2012 to Nov. 2012 it was fine, then starting Dec. 2012, the internet started to slow down at night. I'm getting 6-7Mbps during daytime and until around 9pm, then the internet slows down to less than 1Mbps after 9pm. Then starting mid January 2013, the situation seems to get worst, the internet slows down starting around 7pm, and then on the 3rd wk of January, the internet started to slow down as early as 5pm.
    I've contacted the customer service twice. First, the person who attended remotely accessed my computer and after more than 15 minutes trying to find fault at my computer, wiring, set-up or wireless router (instead of the verizon network), he realized he doesn't have any excuses and instead instructed me to hard reset the modem. I told him that if I hard reset the modem, he will be disconnected to my computer. He said, "that's fine, I will call you you to give instruction on how to set-up the modem". After I have hard reset the modem, he never called up and I was left all by myself figuring out how to set-up the modem. I've contacted the customer service the 2nd time, a different person attended and exactly the same thing happened, the guy instructed me to hard reset the modem but never called up after he got disconnected. I guess this is their expertise, how to rudely leave the communication once they figure out that they can't resolve the problem.
    Once the 2 years holding period is over, I will change to other internet provider and will never switch back to verizon again. I will never ever recommend verizon to my friends and will share them my experience with verizon.

    This is one of the reasons we are leaving Verizon as well.  We previously left Brighthouse because the initial deal sounded great, until the rebates expired.  When the price jacked up, I told them they had to better because Brighthouse was much less expensive for the same package but their service didn't slow down at 7pm.  The customer service agent said I really couldn't compare the two because Verizon has a superior quality of service.  I asked, "Then why does my internet slow down around 7pm, because the Brighthouse service didn't do that".  All the customer service agent has to say was, "That's not true."  Nice try.  He essentially called me a liar, about something I've seen firsthand, and I have experienced that same 7pm slowdown with a similar service we had in NC.  Sorry Verizon, we left Brighthouse because we thought we were saving a few bucks, and getting a higher speed on our internet.  Not true on both accounts and we're going back.    PS To the person who made this initial blog post, I noticed there were 484 views but no "likes"  - it's because that button won't let you click it, at least that's what I experienced on my end.  I'm certain there are a lot more people out there who deal with this same issue and are quite frustrated. 

  • I have a white iPhone 4 16gb and the home button doesn't sit flush with my screen, it feels like it has sunk down a little. Warranty expires June 2012 so it is under warranty, Would i be illegible for a replacement? Thanks

    I have a white iPhone 4 16gb and the home button doesn't sit flush with my screen, it feels like it has sunk down a little. Warranty expires June 2012 so it is under warranty, Would i be illegible for a replacement? Thanks

    No way really for anyone here to give you an answer to that question.  You would need to either send it to Apple for evaluation, or take it into the genius bar at a nearby Apple Store and ask them about it.  Only an Apple employee could make the call, and they would need to see and handle it to decide.

  • My MacBook Pro is running really slow - how can I fix it?

    my MacBook Pro is running really slow - how can I fix it?

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with a visit to: OS X Maintenance - MacAttorney.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Repair the Hard Drive - Lion/Mountain Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    Suggestions for OS X Maintenance
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Data Backup
      3. Deja Vu
      4. SuperDuper!
      5. SyncTwoFolders
      6. Synk Pro
      7. Synk Standard
      8. Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this?

    No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this? I received it as a gift for college, but its hard to do research when everyone constantly yells at me to get off because they can no longer continue what they're doing.
    <Edited By Host>

    " how can I sync my iphone to my mac book without losing all the music and pictures on it?"
    You cannot.  Copy everything you want form the old computer to the new one, then sync it.
    it basically says you have to erase your iphone to sync to a new itunes!
    Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

  • HT204023 I don't have personal hotspot in my iPhone 4s settings and i beleive it's supported by my Internet provider how can I fix that ?

    I don't have personal hotspot in my iPhone 4s settings and i beleive it's supported by my Internet provider how can I fix that ?

    My cellular provider is mtc touch in Lebanon middle east . As for the FaceTime issue it's banned in some countries not all not in lebanon at least but since my phone is from the UAE I don't have FaceTime on it.

  • I cannot access my face time.When i do that I get a message that I cannot sign in and to check my internet connection. how can i fixed that?

    i cannot access my face time.When i do that I get a message that I cannot sign in and to check my internet connection. how can i fixed that?

    What version of iTunes are you using?  The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
    B-rock

  • HT4211 I just updated my iPad 2 to iOS 7 and whenever I try to type on the keyboard screen, it takes several seconds to acknowledge the key press. It really is slow.How can I fix this?

    I just updated my iPad 2 to iOS 7 and whenever I try to type on the keyboard screen, it takes several seconds to acknowledge the key press. It really is slow.How can I fix this?

    Settings>General>Reset>Reset All Settings

  • Whenever i have multiple tabs open in safari, my computer runs very slow.  can i fix this?

    whenever i have multiple tabs open in safari, my computer runs very slow.  can i fix this?

    From your Safari menu bar click Safari > Reset Safari
    Select:  Clear History  (also empties the cache)
    Deselect the remaining boxes, then click Reset.
    Quit and relaunch Safari .
    Helps to tell us which Mac OS X is installed when post 

  • I just downloaded the new software to my iPad but now it won't connect to the Internet. How can I fix this?

    I just downloaded the new software to my iPad but now it won't connect to the Internet. How can I fix this?

    Have you tried to reboot your router? Unplug it, count to 30, plug it back in and let it reboot. Also you may want to go into your settings on your iPad and 'reset network settings'.
    In case the update messed something up, letting the devices reboot sometimes helps.

  • Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow.  Can I fix the HL-DT-STDVDRW  GA11NR?

    Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow.  Can I fix the HL-DT-STDVDRW  GA11NR?  The Apple store is a two hundred mile one way trip.

    I didn't imply anything; I simply explained the terms of the ToU here because you had not specified what you were trying to do. Most such related questions are about copying protected content and I would not appreciate having my post removed with the obligatory email from Apple because I violated the ToU. In any case, you can find dozens of threads googling (or here) about the newer burners being slow copying content if it is protected. FWIW, if the DVD was produced by a commercial outfit, they may have used some sort of protection or an unusual file format - that problem has been discussed here previously.
    As for your slow burner - since we don't even know what type of Mac/model/year/OS  you have, it is impossible to guess. If it's an iMac, those vertically installed burners are known to be less than perfect; the horizontally installed versions are better, but still not as good as an external. I've used an external burner for years.
    As for the conversion time: the burner should have nothing to do with that; it is your software and your Mac's processor and amount of RAM that matter for conversions and rendering. I have no idea what you are using to burn the DVD. And, as a last consideration: you should always burn your content at a slow speed so you can avoid burn errors and have better results.
    Good luck.

  • Internet slows down or shuts off for a few minutes, then goes back to normal. What should I do?

    So I've been away for a while and when I got back to US I've had some issues.
    It's the same internet connection as before, so I'm not sure if that's the problem.
    When I use an internet browser everything goes well for a while and then internet suddenly slows down or shuts off , it dosen't show dissconnect or anything.
    The only thing that happens is that pages won't load, or they load super slow. This usually happens for a few minutes.
    I got my macbook this september and I'm careful with not blocking the fans.
    The same thing happens when I play games online, the internet "shuts" off or slows down, freezing the game. I'm now unable to play that game because of this issue.
    I really don't know what could've causes this and I'm not really sure how to check, I would appreciate any help.
    When this issue happens it dosen't seem to be because of what I have open, how mane pages, or over heating.
    (I'm not a hundred percent sure about the heat, it gets warm but hot acctualy heated up as in when it's running heavy applications)
    I'd like a response fast because this affects not only my gaming (which I really miss) but also everything else like HW, since the page would die suddenly.
    Please help
    p.s It's a wifi connection and I don't have acess to use a cable. I'm trying to get a hold of the password to the internet since I only have it locked on my laptop as "go-to" connections.. My landlord has the password ..

    Have you tried resetting the SMC?

  • Upgrade to Leopard causing internet slow down?

    I just upgraded my G5 PowerMac from Tiger to Leopard. The Mac is plugged via ethernet directly into a NetGear router so I can also access internet wirelessly from my MacBookPro. Since the OS upgrade on my tower, I've noticed marked slow down in internet connectivity: web pages load really slowly and Mail takes forever to pull in my mail. Could Leopard be the culprit? Have run a speed test and results show that I'm getting what I'm paying for in terms of up/download speed, but wait times are ridiculous! Help!

    If you look really carefully, you see me alternately scratching my head and hitting it against the wall . I'm almost clueless. I'm going to assume that your Internet access is via WiFi, right? If so, the only thing I can come up with is that when you mirror the display there's some kind of electrical interference that gets thrown up. (And I'll cheerfully admit that I could easily be totally wrong!) If I'm correct though, it is possible that switching your WiFi channel, selecting Internet robustness in the WiFi settings, or moving your notebook as far away from the display as possible might work.

  • Random internet slowing down on MacBook Pro with Retina Display

    Hi there!
    I have a 15" Macbook Pro With Retina Display, 2.6 GHz Intel Core i7, 16 GB 1600 MHz DDR3, Intel Iris Pro 1024 MB, OS X 10.9.2 (13C64). late 2013
    for some reason since the last system upadate, my internet on my Macbook has been slowing down at random times during operation, sometimes I am using facetime and browsing Safari, facetime continues operating normally but everything else relted to the interent would show me that there is no internet connection "Basically i cannot use anything related to the internet unless i turn off and on the wirless adapter. and its not just while using Facetime and safari but Safari alone aswell "one second am using the internet no problem playing video on youtube and checking facebook and all the sudddent it stops loading and tells me that there is no internet connected though the wireless indicator shows otherwise.
    I have really fast internet and am the only one using it, i have comcast Blast Plus "57 MB/S download speeds".
    could u please help me get the bottom of this random occuring issue ?

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About
    Also try turning off Bluetooth

Maybe you are looking for

  • Field Control settings in SRM 7.0

    Hi Experts , We are configuring SRM7.0 with ECC6 ( Ehp4) having Classic Scenario . We want to make 1. Some fields mandatory for example Refernce Document in Confirmation document..etc --->> I done setting in the sRM Config at   SPRO......-> Configure

  • Table Key field Question

    Hi All,           According to the requirement I have to make the CURR type field as the key field in one of the table. But dureing activation it's throwing the below warning : Key field <Field name> has num. type CURR: Buffering not possible, Transp

  • Macbook pro heats up after installing lion

    Hi My macbook pro 15 inch 2,66 Ghz 4 gb 1067Mhz DDR3. makes al lot of fan noise since i've installd os lion. Im sure it was absolutely scilent before. If i run just safari and mail it makes a lot of noise as if im working on a heavy file in Photoshop

  • Zero priced components missing!!!

    Hello guys, I have recently purchased a Cisco 5596 Nexus switches,  6248UP fiber interconnect and Cisco UCS chassis including the Blade servers  for Cisco UCS implementation. When I placed the order to buy the  equipments, I have included these zero

  • How can a class listen to other class's aoutput

    I have 2 classes which are both unrelated. but i want one class to listen to the output emitted by the other class. eg, class A continuosly prints messages and these messages, i want to be there in class B ... Any suggestions?