I finally found the answer! (Using calender and contacts)

I had my ipod for 9 months and the contacts etc. always baffled me. I read the help but as ignorant as i am i did not understand. (However i have qualifications in IT!) Anyway i thought i'd write a post to help those in a seemingly esay way to understand. For windows.
1. Connect Pod.
2. Open my computer and go to Pod drive.
3. There are 3 folders, contacts, calenders and notes - im sure you know.
4. Open Microsoft Outlook. Make a contact but when you save as: - save it as a Vcard (option below name in list)save it outside the 3 folders. Then drag it into the contact folder with mouse.
5. For calender save as icalender.
6. For Notes save as txt and create in Notepad.
I know i'm probably repeating things already said but i think it would have helped me. Maybe it'll be useful.

Lou, THANK YOU!
Thanks For Letting "ME" know that I could Do My Contacts With Microsoft Outlook.. I never Knew..
"I know i'm probably repeating things already said but i think it would have helped me. Maybe it'll be useful."
Really Usefull And Helpfull.
M.

Similar Messages

I've finally found the answer to the freakin' annoying clicking and snapping sou

Here you go the answer to all their problems... no tech willing to give us this answer so here I got it after 5 years :
Get a freakin Motherboard with onboard sound... no more problems! No clicks, no snap... just clear sound.
So far I've tried not only Creative but Hercules, M-Audio (audiophile serie) and of course Sound blaster Li've!, Audigy, Audigy2, Audigy2 Zs... All got a snapping sound so that means the problem is somewhere else : Power supply? Static? I've notice that the problems come when sound output comes to a peak... Anyway... Big relief to watch and listen to music without this drivin' me completly nuts sound!!!!!!!!!!!!! AAAAAAhhhhhhhhhhhhhhhhhh!!!!!!!!!
So long Creative!

do you tried this solution:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39227
Perhaps this want help you.....
Zyx

Is there an app that can read the adresse in calender and use it in a gps app so you dont have to right it 2 times.

Is there an app that can read the adresse in calender and use it in a gps app so you dont have to right it 2 times.

If it is a complete address, and is formated properly, it should appear as a link. Tap on it and it will open the Maps App.

I have given up on using Outlook 2010 with icloud. How can I use icloud to manage all of my calender and contacts?

I had been using Outlook 2010 synced to my iphone (4) and ipad and ipad2. It has not been a pleasant or successful endevor. I have a successful copy of my Calender and contacts on the icloud now. I am unable to connect to the icloud calender using my pc. I wish to disable the Outlook calender and contacts and only access the calender and contacts on the icloud. When I try to connect to the calender using icloud the message only tells me an error has occured and please send this info to Apple, but not provide any info on why it does not work. What do I need to do? Thanks

is it compatible with Firefox 5.0 ??

So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

If you're on windows try the following:
This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
1. Quit itunes
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
4. press ENTER
5. Reboot your machine
6. Restart itunes & connect device to sync
7. Good luck

I have just bought Dell XPS15 Windows 8,1 office 2013 .Cnnot sync calender and contacts wit Icloud and also not the Iphone 5 with cable

I have just bought Dell XPS15 Windows 8.1 office 2013. Cannot sync calender and contacts to Icloud and also not the Iphone 5 by cable

Try going through the troubleshooting steps listed under "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in this article: http://support.apple.com/kb/TS3999. In particular, make sure the iCloud Outlook add-in is active within Outlook.

I have my mac air hooked to the tv using thunderbolt and HDMI

I have my mac air hooked to the tv using thunderbolt and HDMI the background screen and screen saver are the only things that will appear, but no icon's and cursor what I'm i missing?

That's called the "extended desktop mode". Your screen is logically extended to the right (by default). Drag an application off the right side of your MBair screen and it'll appear on the TV.
You can also toggle between extended desktop and mirror mode by pressing CMD F1.
Visit all the settings in System Preferences > Displays > Arrangement tab.
Regards,
Captfred

After getting the latest update I recieve an error about MSVCR80.dll missing has anyone found the solution as uninstalling and re installing doesnt work

after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work

Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

TS4118 Ever since I got the iphone 5 my phone/icloud calender and contacts will not remain synced with Outlook. I am constantly having to sign in and sign out and unlink and re link to Outlook.

Ever since I got the iphone 5 my phone/icloud calender and contacts will not remain synced with Outlook. I am constantly having to sign in and sign out and unlink and re link to Outlook. this creates multiple categories of contacts and calenders and I have no idea which is syncing with my phone, ipad, outlook. Help. thanks.

Sounds like the Outlook plugin isn't working properly. You could try a couple of things:
Go to Start>Control Panel>Add/Remove Programs, uninstall iCloud, the download and install the iCloud contol panel for Windows again from here: http://support.apple.com/kb/DL1455. Then sign back into your iCloud account and check your syncing settings again.
Uninstall iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. (Uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.) This will replace the Outlook plugin.
Then try your calendar again and see if it will sync properly now.

I finally found the way to DISABLE the annoying sound effect in Windows

I tried looking around the site for some answers to get rid of the annoying sound effect after a page loads in iTunes 8 on Windows Vista. I have found the answer!
*Vista users:* Right click on your desktop, and then go all the way down and click "Personalize". Then in personalize, click "Sounds". Scroll down until you see the iTunes category. Then simply click the "Page load complete" sound and choose (None) as the sound.
Annoying sound DISABLED.
Hope this helps!

do you tried this solution:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39227
Perhaps this want help you.....
Zyx

After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!

After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!
== This happened ==
Every time Firefox opened
== Hard to say but have been trying to diagnose for at least a week.

Original message wouldnt post with attachments - trying again....
Attachments:
secondclickheredialog.jpg ‏40 KB
FirstDialog.jpg ‏19 KB
Firstclickheredialog.jpg ‏16 KB

My iphone 5 stopped syncing to outlook email, calender and contacts after the IT department switched from a HP exchange server to MS2010 exchange server. Help?

My iphone 5 stopped syncing to outlook email, calender and contacts after the IT department switched from a HP exchange server to MS2010 exchange server. Help?

Try deleting your exchange account on your iPhone, then adding it again fresh. I had the same problem when we upgraded servers and this fix worked for me.

I am having issues with syncing my calender and contacts

I would like for the changes that I make on my iphone to be primary. I have sync issues with the calender and contacts. New contacts get erased and some contacts are doubles as well as email addresses. My calender entries have been erased on sync. Can someone please help???

Check the parameters in your email account against what is recommended by your email provider.
Settings > Mail, Contacts, Calendars > account
Have you contacted the support contact at your email provider?

How to delete calender and contacts from Sync?

Hi,
I tried to sync my cals and contacts with iPhoneMacMobileMe, and there are always duplicated. So I decided to sync everything over mobileMe only (iPhone MobileMe and MacMobileMe). I unselected the checkboxes in iTunes to sync theses data with iPhone. But on the iPhone, there's still data from last syncs - both from calender and contacts. How can I remove those from the iPhone, so that only mobileMe calenders and contacts are shown?
Thanks

I just, 30 minutes ago, learned, I think, the answer to that. I tried it and it worked for me. I had duplicate events and "sets" of calendars.
Delete the MobileMe account on the iPhone.
Restart the iPhone.
Add the MobileMe account back and turn on Calendar and Contact syncing.
You'll be asked if you want to merge the data. Tap yes.
This should, after a few minutes, set you up with only one set of calendars and contact groups.
Sync only over MobileMe and don't via iTunes.

By using Inspector, i found the way to create and insert a scrolldown list ; however the list has to be created from inserting each line at a time; what i am looking for is a way of creating a scrolldown large(30 to 100 lines) list.

By using inspector, i found a way to create and insert a scrolldown list (*) in a cell ; however it can only be done one line at a time .what i am looking for is to create a bigger scrolldown list ( from 30 to 100 lines ) and in excel we can do it by copy and paste from an other doc...there must be a way with Numbers !!! any ideas ?
(*)...go to inspector/4th icon to he left/format/local menu/and then input the list one by one...and it creates a scrolldown list where you cursor was located in numbers.
please help....

If you need to use this kind of objects, my guess is that it would be better to use an other application like libreOffice.
At an user request, I wrote an AppleScript grabbing the list from a table embedded in the Numbers document.
Here is an enhanced version.
--{code}
--[SCRIPT fake-scrolldown-list]
Enregistrer le script en tant que Script : fake-scrolldown-list.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dans une table d'un document Numbers.
Aller au menu Scripts , choisir Numbers puis choisir “fake-scrolldown-list”
Le script extrait la liste d'articles de la table « la_liste » de la feuille contenant la table ci-dessus.
Il demande de choisir un article puis dépose celui-ci dans la cellule sélectionnée.
ATTENTION : À la demande d'un utilisateur, Le script utilise un nom de table localisé.
Je n'aime pas cela parce que de ce fait, lorsque le script est utilisé sur un système Français,
il requiert une table nommée "la_liste" mais lorsqu'il est utilisé sur un système Anglais il requiert la table "the_list".
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: fake-scrolldown-list.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell in a table of a Numbers document.
Go to the Scripts Menu, choose Numbers, then choose “fake-scrolldown-list”
The script extract the list of allowed items from the table “the_list” which must sit in the same sheet that the table embedding the selected cell.
It urge to choose an item then insert it in the selected cell.
CAUTION : I use different names for the required table according to the language in use on user request.
I dislike this feature because a document built by a French user sent to an English one will fail.
On the French system the script ask for the table "la_liste" but it ask for the table "the_list" on an English system.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/31
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2, myListe, maybe
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName
Extract the list of allowed values from the dedicated table *)
                    if my parleAnglais() then
                              "the_list"
                    else
                              "la_liste"
                    end if
                    tell table result
                              set myListe to value of every cell of column 1
                    end tell
                    set maybe to choose from list myListe
If we select the Cancel button, exit silently *)
                    if maybe is false then error number -128
Fill the selected cell with the choosed value *)
                    tell table tName
                              set value of cell rowNum1 of column colNum1 to (item 1 of maybe as text)
                    end tell
          end tell -- Numbers…
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
          tell application "Numbers" to tell document 1
                    set d_Name to its name
                    set s_Name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_Name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_Name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if
                    end if
                    tell sheet s_Name to tell (first table where selection range is not missing value)
                              tell selection range
                                        set {top_left, bottom_right} to {name of first cell, name of last cell}
                              end tell
                              set t_Name to its name
                              tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                              if top_left is bottom_right then
                                        set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                              else
                                        tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                              end if
                    end tell -- sheet…
                    return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
          end tell -- Numbers
end get_SelParams
--=====
on parleAnglais()
          local z
          try
                    tell application "Numbers" to set z to localized string "Cancel"
          on error
                    set z to "Cancel"
          end try
          return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
--{code}
Yvan KOENIG (VALLAURIS, France) samedi 31 décembre 2011
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

I finally found the answer! (Using calender and contacts)

Similar Messages

Maybe you are looking for