I finally got the TV@nywhere master working

After installing winamp 5 and this plugin:
http://winamptv.zapto.org/
I didn't install MSIPVS.
I finally got my TV@nywhere master working under XP SP1.
I've got all the channels and a good video and sound quality.
I didn't install the new drivers, the ones I got with the card are working fine.
I hope anyone can solve their problems the same way...
TVANYWHERE is real fun, now it works....

I have that plugin and it works wonderfully. Although you cannot actually record television from it and thats one big loss. I'm still having trouble with mine blue screaning when shutting down, restarting, hibernating or standby. [ see this threadand help me! ]. I use the card to do a lot of recording and tis just annoying now.

Similar Messages

HT203167 I finally got the update of IPHOTO 11 to download, now when I try to open my IPhoto it says it needs to be prepared to work, so I install that and it says it is downloaded, but when I try to open my Iphoto it just keeps repeating that it needs to

The above question is too big to read, so this is what it says>>>>I finally got the new IPhoto 11 to download after problems with the installation; now when I open it, a message pops up that says to continue I need to prepare the old version for the new....so I downloaded the preparation download and it says it is installed, but when I go back to open IPhoto again after this installation, the same message keeps popping up! I cannot find any of my pictures either. What is going wrong and how can I continue with IPhoto and update and get my pictures again? This all has happened because I made a big book of my travels and when I went to purchase it it said I could no longer buy books using the old IPhoto 7.........so I updated everthing and bought the new version and did everything it said, but still not working:::HELP!

You have to download and run the upgrader then launch iPhoto. Go to the utilities folder in Applications and launch the iPhoto upgrader. Then launch iPhoto and it will upgrade the library
LN

Got another TV@nywhere Master

I went and did it, I bought another Tv@anywhere Master. The hardware has an 881 chip on the card but it is the 23881-19 release this time, I beleive my original card had the 23881-12 chip.
I did not install the software from the included CDs but use the latest version downloaded from MSI. Only needed the CDs for the serial numbers.
Anyway been running for 3 days now with none of problems I had with the original card and my remote worked first time. In general the drivers and software has improved but the display still has very poor de-interlacing but is marginally better than before.
The Radio does seam to tune better than before.
Lets hope it stays that way and the MSI do not forget to update the drivers etc. from time to time.

I am using the pure MSIPVS and the drivers downloaded from MSI. I am using nothing off the CDs except the Teletext program and the Serial numbers.
I am now also using the full un-hacked version of DX9b using the latest patch for TVTuners. I have done nothing except scan for channels, all the country details and TV standards were set by the software. I was quite amazed by this as I was expecting problems with the remote but it also worked faultlessly from the start. Even using the line-in cable rather that the internal audio connection with no problems.
I had heard of some people having a pleasant experience using the TV@nywhere Master straight out of the box, it looks as if I was lucky this time.
Although it is quite possible some hacked settings etc remained from my previous card I would have thought that the complete reinstallation of DX9b, the drivers and MSIPVS would have cleared any of the old stuff.
One thing I am noticing about the new Radio software is that when you boot up static white noise comes from the speakers. If the radio is muted before it is shut down this is not a problem, but MSI need to amend the software to muted the radio automatically on exit.

Finally got my 5th gen. ipod working and when i hook it up to itunes it....

finally got my 5th gen. ipod working and when i hook it up to itunes it says "iTunes cannot read the contents of the iPod “IPOD”. Use the iPod Software Updater application to restore the iPod to factory settings." i put in the cd after this and it didnt do a thing. i really have no idea what this means. please help.

finally got my 5th gen. ipod working and when i hook
it up to itunes it says "iTunes cannot read the
contents of the iPod “IPOD”. Use the iPod Software
Updater application to restore the iPod to factory
settings." i put in the cd after this and it didnt do
a thing. i really have no idea what this means.
please help.
I had this problem, then replaced my usb pci card w/ a new one and it worked...

How do you use passbook? Finally got the app to connect to App Store. Does not seem to allow me to add anything.

How do you use passbook? Finally got the app to connect to App Store. Does not seem to allow me to add anything.

http://support.apple.com/kb/HT5483
Use this

Finally got the update, But

Hello All,
After 10 days, I finally got the update @ 9:30 this morning. Its going take a few days to see what got fixed and what got broken.
After the update I have a bunch of contacts that I can't remove. I looks like they are on the sim card. I could remove them when I got the phone. Its
#BAL
#DATA
#MIN
#PMT
Global Support Team
Warranty Center

When you reboot the phone, they should go away.
You can also open the people application, press menu and then view. Uncheck the SIM card contacts. It will actually say that there are zero contacts, but I unchecked it anyway.

Got the shuffle G2 to work with XP- somewhat....

I like everyone else with a shuffle have been having problems with Windows not recognizing the iPod, it would show up in the device manager as an "unknown device" under the USB root hub. I tried all the uninstalling/rebooting/reinstalling crap and nothing fixed it. I finally downloaded the shuffle restore utility from Apple, ran that and suddenly it worked- Windows recognized it and showed as my G drive, latest itunes software linked up to it and I was able to load it up with songs for my son. I "ejected" the shuffle from within iTunes like they say you should and tried it out- plays songs fine.
I thought I'd try hooking it right back up to the computer to see if I'd found the "holy grail" of fixes for all of us Windows people that Apple doesn't seem to care about. Got a big fat "unknown device" message again...
I'm thinking that we may have to run the shuffle through the restore utility every time to get windows to recognize the shuffle. I know, you'll lose all your stored songs when you do that, but until Apple decides to provide us with a working USB driver for Windows (like every other "mass storage device" in the world has) we'll all have to suffer.

It did show up as the G: drive- the only other time the G: drive shows up in the profile is when I'd connect a USB storage stick- like one of those small keychain storage devices so you wouldn't think there would be a conflict. I don't have both the Shuffle and USB storage drive plugged in at the same time.
I'll try it again and change the ipod drive letter- thanks !

Problem with the TV@nywhere Master's sound

Hi,
I have TV@nywhere Master.
The TV picture is OK, but the sound swithcing off after about 90 seconds of playing.
Then I change station and the sound is back. But after 90 seconds it switch off again.
etc.
Does someone know how to solve this problem.
Thank You,
Mike

dear Mike
I have the same problem. to the best of my judgement, this is hardware problem and you should contact the manufacturer for warranty coverage through your dealer.
omar

Finally got the ipad to sync-however when I try to sync a new pictuce folder , ipad deletes the original ones I put on I pad- how to I download new albums without deleting the old ones

I finally got he ipad to sycn photos from computer to ipad- however when I try to download a new album- the old one is deleted and replaced on the ipad- how do I avoid this ?

You can sync multiple folders to the iPad, as long as they are under the same parent folder on your computer so that you can then select and sync them to the iPad together in one go, as only the most recent photo sync remains on the iPad - each folder will get it's own album on the iPad. Not including them in a subsequent sync is how you delete them from the iPad (as you've found out).

I finally got the 7.8 update on my HTC Trophy!

Not really. I do have my odds on VZW releasing 7.8 before Cyan though.

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

My serial number for PS Elements 7 isn't working. I purchased it in 2011 and the computer that I was using it on broke. I finally got the download link from tech support but it keeps telling me my serial number isn't valid, now what?

I've been trying to figure this out for a long *** time now and it's getting seriously old. Anyone have any advice?

Hi,
Did you buy PSE 7 as a download or as a set of discs?
PSE 9 was available in 2011 so I suspect you might have the disc set as I doubt Adobe would be selling older versions.
I believe that in the days of PSE 7, the download version and disc version had a different range of serial numbers and the two could not be interchanged.
If your serial number is for a disc version, then you need the installation discs to install it on your new system.
Brian

INTERVIDEO MSIPVS doesnt install on the TV@nywhere MASTER???

Im Trying to install the Intervideo MSIPVS after i double click on it, it hangs then comes up with an error
Error Number: 0x80040707
Description: Dll function call crashed: Instutil.GetDVRProductInfo
Steup will now terminate.
Iv got this Master TV@nywhere in a MSI Mega 865 Cube Deluxe (intel) p42.4, 1gb ram, onboard vga, onboard Sound, iv tried putting a MSI 5200-t128 in but still get the same problem! can anyone help?
Email: [email protected]

not without reformatting
before installing windows, go into BIOS and temporarily disable the USB controller (to deactivate the Card Reader). Or you could open the case and disconnect the card reader from the mobo
boot from the windows cd, and delete your existing partition, then when you create a new partition, C: will be the first available. once the partition is created, when windows reboots your PC you can go back into BIOS and re-enable USB controller (or reconnect), or you could just wait until windows has been installed, it will pick up the card reader and usb controller automatically

Yea - Finally got the new iSimple IS77 connection for the 3GS in my car.

I had an audio 'line-out' connector installed in my car for my iPod but it didn't produce audio from my iPhone. Finally, I got a connection from Peripheral Electronics that does the job. I pretty much don't need my iPod anymore because now I can use the iPhone to play tunes in true 'line-out' audio fidelity from the iPhone through my car stereo. This is handy because I always have my iPhone with me and I don't have to haul around the iPod do do tunes I want in my car. It sounds great!

no comments, but good hook-up.

I FINALLY GOT MY 160GB CLASSIC TO WORK

This may work for everyone as well. So try it. I got my mine to work and my friends.
*plug in your 160GB
(yes...it will freeze your itunes but that is okay).
*Now if you have windows go to My Computer.
*You need to be able to see all your drives (especially your IPod - which should be there).
*Now open your music folder (I have music that I have downloaded from Itunes and music that I have gotten from CDs that I still use with windows media player...you want one of those.
*drag any album randomly onto your IPod.
*It should start syncing. drag another album onto it if you need to. I had to do about 2 or three times.
*your IPod should now show up on Itunes and unfreeze the system and function normally.
Once you have done this. Go back to your ipod in My Computer and delete those albums that you have previously draged in.
Start syncing normally.
It should work. Unless I was just lucky with two Ipods.

Or they may have just corrected it. But give this a try if you can't get your Ipod to work by just normally connecting the IPod.
good luck

Finally got the shipment status email

I just got an email with the Fedex tracking number and delivery date 9/21/12 at 3pm I live in Miami.
Ship date
Sep 19, 2012
Picked up: Memphis, TN
Estimated delivery
Sep 21, 2012 by 3:00 PM
Service type
Standard Overnight - Indirect Signature Required

Forgot to mention that my card was charged this morning.

I finally got the TV@nywhere master working

Similar Messages

Maybe you are looking for