I find no normal Wireless-Networks but the Hotspot of an other Iphone. Why?

Hey Guys.
I have a Problem. I bought a second Iphone. It is an Iphone 4.
The first thing i did, was to reset the Iphone to factory settings. After this i updatet the Ios to 6.1.
Everything works fine except the Wireless Network. I couldn't find any Networks. I only can find an Hotspot that i created with my other Iphone 4s.
I reseted the Iphone some more times to factory settings but this does not help. I also checked the Network settings at our router. (2,4 Ghz, no Mac-filter, no password for Wifi, Wifi is visible). My Iphone 4s can find the Network but not the new Iphone 4.
Does anyone know this problem? I hope someone can help me.
Regards
Keith

Solution: The Wifi on the Motherboard wasn't connected with the shell. So the Wifi Signal was to weak!
https://www.youtube.com/watch?v=ZeiG5Nm1kcc

Similar Messages

  • My iPhone 3GS won't charge. It saids this accessory is not supported but the charger works on other IPhones. What do I do???

    My iPhone 3GS won't charge! Whenever I plug it in it saids charging not supported by this accessory. What do I do?? Help please!!!

    You can clean the iPhone's dock connector with an old dry toothbrush.
    You won't know for certain, but if no change after making sure the dock connector port is clean, more than likely there is some damage.
    Make an appointment at an Apple store if there is one nearby where it can be determined if there is damage to the dock connector port or if there is another hardware problem.

  • HT4199 My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly?     My printer is a Brother MFC-J270W

    try disabling email scanning for incoming mail.
    One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored.

  • I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

    I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

    How can I access the password or, if necessary, reset it.
    Read the user manual that came w/your Airport router or you can cross-post in one of the  AirPort Forums for instructions. 

  • The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

    The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

    Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
    To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
    If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
    The following might work, but you will not know until you try.
    Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
    Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
    The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
    (What is the difference in the 2 -- one is about twice the price of the other…)
    http://www.apple.com/wifi/

  • I just purchased an Apple TV.  I have a pc running windows 7.  It is connected to a router and the router is connected to a wireless router.  I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

    I just purchased an Apple TV.  I have a pc running windows 7.  It is connected to a router and the router is connected to a wireless router.  I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

    I don't mean to be facetious but sometimes the simplest things are overlooked.  To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open.  It also needs to be on the same network.  My network is dual band and works with either stream but a friend of mine does not.  He has to set the computer and the Apple TV to the same band.  Hope this helps.

  • My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

    My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Setting>:General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections

  • HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

    I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

    Welcome to the Apple Community Willy.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • I can see my wireless network,but my ipod4 will not let me connect to the network?

    I can see my wireless network, but my ipod4 will not let me connect to it. When I try it tells me that it is unable to join. I can access the network on my laptop fine. I am also having trouble with connecting my ps3. It has the exact same problem. Can anyone help me?

    The ps3 problem tends to indicate a router problem.  Have you powered off and then back on your router?
    For the iPod try:
    - a reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset Network settings: Settings?|>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Is there a way to configure win 8 Laptop to airport express?  I can see theN connection to the wireless network, but troubleshooter suggests there's t

    Is there a way to configure win 8 Laptop to airport express?  I can see the connection to the wireless network, but troubleshooter suggests there's there is no gateway and of course no internet. The connection
    shows limited.  Any help you could provide would be most appreciated.  Further, should I simply buy another router for the windows machine?  If I did that, would it interfere with the airport?

    The internal HDDs must be formatted in either EXT3 or EXT4 file system because NSS uses Linux OS.  This is mainly because the RAM designed to fit with the customized Linux OS's size.
    You can connect to an external HDD via a  USB or eSATA port. The external HDD's file system can be NTFS, FAT32, AFT or EXT3/4 to be recognized for read/write. You can connect a 2TB USB/eSATA drive connec to the NSS via USB port to format your HDD for NTFS, AFT, FAT32, or EXT3/4 partition.
    You can join the NSS to a Windows domainr so all domain users to access NSS. You cannot replace the NSS for the Windows 2003 SP2 server. They are two different products and do different jobs. Windows server is features sets server while the NSS is the files/data server.
    Hope that helps!!

  • HT3728 I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
    In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
    More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

  • TS1559 Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

    Since upgrading my iPhone5 to the newest iOS (6.1.2) I can longer connect to WiFi. It sees the wireless network but will not connect.. Other devices in my home that weren't upgraded can connect just fine.

    I had the same problem.  I did the reset networks on my iPhone & it did not work.  My husband read somewhere that changing the channel on the router to manual & selecting the highest available channel number might help.  I did that & it solved the problem.  I have not had the problem since.

  • My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?

    What am I missing here. I'm sure it is some kind of sitting that is not right.
    Thanks Pat

    Sounds familiar:
    lllaassJan 6, 2015 2:12 PM Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?
    Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard  it won't connect. What is the problem?in response to Patricia Isaac1
    Power off and then back on the router
    What happens when you enter the network's PW?
    Try forgetting/deleting the network if necessary. To do that go to System Preferences>Network>wifi>Advanced and select the network and click on the minus sign
    Csound1 wrote:
    Turn off the modem and the router, wait 60 seconds. Turn on the modem, wait 60 seconds, turn on the router.

  • I am connected to my wireless network but cannot access the internet. Any ideas?

    I am connected to my wireless network but cannot access the internet. Any ideas?

    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • I've connected to the wireless network, but my Ipad still insists I have no internet connection, what can I do?

    I've connected to the wireless network, but my Ipad still insists I have no internet connection?
    What can I try?

    If the iPad insists that you have no Internet connection, why do you say that you've connected to the wireless network?

Maybe you are looking for

  • Please Help- Forum Solutions Don't Solve Blank Creative Cloud Desktop App Problem!

    I'm using Windows 7 and simply want to download a trial version of InDesign.  I downloaded the Creative Cloud desktop app and it's blank.  Thinking I still need to do more on the Adobe Creative Cloud web site I went and clicked on the download under

  • CS4 - New layer won't show added color overlay, gradient, patterns?

    I'm using CS4 Extended for a few years... its been working fine but all of a sudden my layers are blank? I've tried Google but can't find a solution. Started a new graphic for a label using a 300dpi resolution, 23.250" inches wide and 2.500" high. Fi

  • Is there a reason a Samsung 37" 1080p would look less crisp than a Samsung 32" 720p?

    I purchased the 32" but thought it was a bit too small for the room.  We sit about 6 - 8 feet away from the screen.  Bought the same brand in 37" today and was disappointed to see that we notice less clarity ... not as much "HD effect" somehow in the

  • Record TV to Mac

    I've been searching for the past two days and I'm a little confused about recording TV shows to the Mac. I've read about Elgato EyeTV 250, and EyeTV Hybrid. I do not know at this point which is the better buy for my purpose. I have a MacBook Pro, and

  • Movie Rental availability (iTunes Store, Ireland)

    Any idea how long movies are available for rental in the store? I have noticed that many movies (e.g. John Carter, Thor, Iron Man 2, X-Men first class, True Grit, Tron;Legacy and many more) which were once available for rent are no longer available.