I fixed my phantom cursor for a short while by reseting my PRAM but now it's erratic again.

My cursor was erratic and I couldn't control it. I reseted the pram and it started to work but only for a short while. After an hour or so it started to act erratic again. What can I do?

Linc, a pretty credible user who helped me out before, posted this on another thread I having going about this same problem. None of these things worked for me, but they might work for some of you.
There are several possible causes for this issue. Take each of the following steps until it's resolved.
1. Follow the instructions in this support article.
2. Boot in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you reboot as usual, stop here and post your results. If you can't boot in safe mode, do the same. If you booted in safe mode and there was no change, go on to the next step.
3. Reset the System Management Controller.
4. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
5. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced.
6. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
7. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
8. If none of the above applies, or if you have another reason to think your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
9. Make a "Genius" appointment at an Apple Store to have the machine tested.

Similar Messages

I tried resetting my pram but now my MacBook won't startup it just stays in the grey apple symbol for 20 mins and then goes to the login page but does not login!

Help, my backscreen keeps flickering and I got told that resetting the pram (alt ctrl p and r) might fix it. But now it won't start up at all. It was working fine befor but now just goes on grey apple screen for 20 mins then the log on page comes up but it won't log in! I don't have the original install disk. I'm not sure what to do and I can't afford to take it to the apple store. What can I do?

See this Apple note: http://support.apple.com/kb/TS2570

HT201413 after downloading 2 albums ifind that most of the tunes only play for a short while and then switches to another tune does anyone know what the problem is and how to rectify it?

Hello there ive just downloaded 2 albums from itunes store and found that they only play for a short while and then flips onto another tune which again only plays for short while so on and so forth which makes the albums completely useless does anyone have a solution?

Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2

My iPhone 5 will not turn on. And when it does, it will only stay on for a short while and then it dies again.

My iPhone 5 will not turn on. And when it does, it will only stay on for a short while and then it dies again.

Hi lammyrock,
I want to let you know to be patient as this troubleshooting can take some time depending on many different. First try putting your iPhone into recovery mode and then use iTunes to restore it. To do that, you can that by making sure that your iPhone is turned off, hold the Home button down while it is plugged into iTunes. You should get the graphic on your iPhone to plug it into iTunes and iTunes should prompt you to restore it. Once that is done and if you have a back up in iTunes or in iCloud, then you can put that back on after the restore is complete. Take a look at the article below for more information to help you.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Hope this helps,
-Norm G.

I seem to have picked up some sort of virus or bug of some kind. I'm getting personals ads throughout my Facebook and yahoo home page. i've tried CCleaner and it takes them off but only for a short time so i downloaded iantivirus but that found nothing

i seem to have picked up some sort of virus or bug of some kind. I'm getting personals ads throughout my Facebook and yahoo home page. i've tried CCleaner and it takes them off but only for a short time so i downloaded iantivirus but that found nothing

It may not be a good soloution for a novice, but I have been using hosts files to block unwanted URLs for many years with zero disasters and lots of positive results.
As I noted, whenever I find a new "bad" site, I simply add the name to my hosts file. It takes a few seconds and then it's gone forever. I find no difficulty whatsoever.
No, it's not for everyone, which is why I gave no specific details; but for those who are interested and have the desire to learn about these hosts files, it is a very good way to avoid "bad" websites.
I also enjoy the "clean" view of a webpage when there are no ads showing at all. The page loads faster and the distractions are gone.
I never realized how much junk I am supressing until I got my iPad and saw all those horrid ads that are blocked on my other computers.
Here is a typical result of properly using a hosts file:
I love it when a plan comes together - - H. Smith.

HT5624 my iphone is connected to a old account that i have used in a while i have a new icloud i tried reseting my phone but now i can get in becuase it linked in with my old account how can i fix this so i can log in with my new account?

my iphone is connected to a old account that i have used in a while i have a new icloud i tried reseting my phone but now i can get in becuase it linked in with my old account how can i fix this so i can log in with my new account i reset my phone but i did it before on my new phone but this old is link to a account that i set up when i was so much younger can you advise what to do?
Thanks

Go into Settings App and turn OFF Find My iPhone. It will ask for your old password, but in the future you can use your new Apple ID account. If you need to reset the old password try this: https://iforgot.apple.com/password/verify/appleid?language=US-EN&returnURL=https ://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext

I updated my itunes for my ipad while connected to my computer. now my ipad shows only the itunes logo, an arrow, and a usb cord. it is frozen and nothing works, HELP!

I updated my itunes for my Ipad while connected to my computer. Now my ipad is frozen on an iTunes logo, an arrow, and a usb cord. Nothing seems to fix it. What can I do. All my business calander, etc is stored on my Ipad. HELP!

I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

The license did not have use restrictions Licenses and terms of use | Adobe
BUT... when your one year Education account ends, I do not think you will be able to renew at the Education rate

I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class now and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, heard Apple will drop support. Help?

I've been reading the comments re FCPX on MacBook Pro and now I'm scared. I'm taking a class in FCPX and thinking about buying to do videos for nonprofits. Won't be fancy stuff, but now wonder if it's a good choice. Also, a classmate who was in CA last weekend said he heard that Apple will drop support of FCPX. Any truth? Advice?. I'm on 10.7.4 with 2.4 GHz Intel Core 2 Duo, 4 GB 1067 MHz. Thanks.

dkstj wrote:
Also, a classmate who was in CA last weekend said he heard that Apple will drop support of FCPX.
While it is against the TOU of these boards to speculate on future products/updates what Thomas said is right: FCPX is quite a new product and it doesn't make any sense to drop it now.
The only thing that MIGHT get dropped at a certain point is support for older hardware/OS as FCP X progresses.

After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.

After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.
Anybody experiencing the same problem and any suggestions to fix the issue.

Hi ..
Try this discussion > Can't connect to Juniper VPN

Have base station and added extender for downstairrs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. What's wrong? Thanks!!

Have base station and added extender for downstairs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. All i get is a blinking amber light; only get green if I bring it into the same room as the base. Both units are the latest models; purchased 2 months ago. What's wrong? Thanks!!

Power off both the AirPort Extreme and AirPort Express
Wait a minute
Power up the AirPort Extreme and let it run for a few minutes
Now locate the AirPort Express about half way between the AirPort Extreme and the general area where you need more wireless signal coverage, and report on your results.
The more that you can minimize obstructions between the AirPorts like walls, ceilings, etc. the better the wireless will operate.

I was charging my iPod and after charging for about 30 minutes I unplugged it. But now all it says is OK to disconnect. I have no idea what to do.

I was charging my iPod and after charging for about 30 minutes I unplugged it. But now all it says is OK to disconnect. I have no idea what to do.

This is the ipod touch forum.
Try posting in the ipod nano forum.

Iphoto froze in the middle of an import. Had to unplug my phone and walk away for a minute while it was still frozen. Now it says it's importing photos even though nothing is plugged in. Now when I plug in my phone it won't import new photos.

Iphoto froze in the middle of an import. Had to unplug my phone and walk away for a minute while it was still frozen. Now it says it's importing photos even though nothing is plugged in. Now when I plug in my phone it won't import new photos. Also refuses to quit iPhoto, preventing me from shutting down/restarting my laptop and I'm starting to get worried. What do I do???
~jerseygirlt595

Apple Menu -> Force Quit

Icons keep moving to the upper right corner - a Finder relaunch fixes it but only for a short while

I'm having an issue that really irks me and it's very frustrating. Whenever I open certain programs (ie. iPhoto, Pixelmator, Safari (sometimes)) and I click to the desktop to either drag a file in or drag one out to the desktop, all the icons start gathering in the upper right hand corner on top of the Hard Drive icon. No matter where I try to drag them, they all snap right back on top of the Hard Drive. Now, I can stop this by option clicking and holding on the Finder dock icon and selecting Relaunch. I can also turn "sort by" to none, but I am a little OCD and I like to have my icons snap to a grid. Here's another vital piece of information. I use my computer at work on an external monitor connected by the Thunderbolt port (an HP monitor) using a DVI adapter. However, this occurs with or without using the external monitor. I noticed this program started happening about 2 months ago after I swapped out hard drives (upgraded size) going from 500GB to 750GB. I used carbon copy cloner to clone my hard drive as opposed to going with a fresh install. I'm beginning to think this may have been a bad idea. I have trashed all the Finder preferences, used Onyx to clear the .DS_stores and other tricks found on the internet. Does anyone have a concrete way to fix this? I am baffled with this one. I've never seen this problem until recently. Any ideas?

- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $99 fr a 16 GB 4G. They do not fix yours.
Apple - iPod Repair price

Getting Cursor for Table control while scrolling

Hi Experts,
I am displaying 3 pages of records using table controls,
and when i double click on the record, i have to display some pop up based on the values present in the particular record,
this is done by getting the line number of the record using GET CURSOR LINE and reading the internal table with the index obtained from GET CURSOR LINE
This is working fine for one page. I am getting problem for more than one pages
i.e. if i have to validate for the 23rd record, it will be the second record in the second page, so i will get line number as 2nd instead of 23rd (using GET CURSOR LINE) and i will read the 2nd record in the internal table instead of reading the 23rd record.
This will lead to improper pop up messages.
So please let me know how can i catch/get the line number of particular record irrespective of number of pages.
Thanks,
Kavya

declare two variables to get line count and line index
data: wrk_linecnt(10),
wrk_lineindx(10).
get cursor line wrk_linecnt.
wrk_lineindx = <table control name>-top_line + wrk_linecnt - 1.

I fixed my phantom cursor for a short while by reseting my PRAM but now it's erratic again.

Similar Messages

Maybe you are looking for