I flashed the BIOS on my dv4 2045dx with the F17 BIOS, NOW Black screen, PLEASE HELP
I flashed the BIOS on my dv4 2045dx with the F17 BIOS, NOW Black screen. Now even when pressing the windows and the B key when powering, the screen stay black. Lights, fan, HD, USB drive with HP_TOOLS partition and bios backup flashes goes on for some time with some beeping every 15 sec.
I try to plug it on to a external monitor without luck.
What's next? Can I reload a BIOS from a CD? Anyone have an idea?
Thanks
Hello KenyaKitten
I understand after flashing your bios the PC will not boot. I will do all I can to help with this issue.
First thing let’s do a hard reset, remove all devices from the PC including battery and power cable. Once all is removed press and hold power button for 15-20 seconds. Once that is done insert only battery and charging cable. Try to boot now, if getting same response move to next line below.
Next, I want you to try is to boot into the bios menu. Turn the PC off and as you turn it on tap the F10 key repeatedly. Hopefully this boots you into the bios menu. Screen will look a little bluish grey and have setup utility across the top.
Also if the PC starts beeping at you while you’re tapping you can stop. Now if you reach that screen you may get a box that say save changes and exit choose no. (Note your mouse doesn't work on this screen so you would need to use the arrow keys)
After that press F9 another box will up come about reset defaults, accept that. Then press F10 to save and exit. The notebook will attempt to boot.
Also please inform me if you notice the number lock or caps lock keys blinking off and on. Also please let me know if the PC beeps at you while tapping F10 regardless if the bios comes up or not.
Please respond at your earliest convenience when you get further information.
Thank you.
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!
Similar Messages
-
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!
Try this link, warning, it's straight to download mode:
http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg -
I was updating my iPad air and in the middle of update it suddently cannot reconnect to my computer and it has the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!! I did try steps from http://support.apple.com/kb/HT1808?viewlocale=en_US - IT DOES'N WORK!
Yes, that is your only option.Yes. You have to restore.
Try the following if you have difficulty restoring.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Pavilion g6t wont boot after bios update now just black screen please help!
I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!
@Fuschia4me,
1. You will have to use another computer
2. Access the HP.com site with the BIOS updates available here is the link
3. You want to select the F.36 BIOS version
4. When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
5. Once done insert the flash drive into your laptop
6. Turn the computer on and press the windows and B key like before
If the process doesn’t work the first time I would try at least 2 more times.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
When I click on the music icon, the orange one , all I get is a black screen , please help
When I click on the music icon , all I see is a black screen , it was working perfectly before and I haven't done anything different that I know of ?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I have a problem both phones wont recognize firmware idk what to do with them
Make an appointment at the Genius Bar or with whoever provides iPhone support
for your location to have the iPhones evaluated. -
My ipod touch 4g turned off and when i try to turn it on it says its not charged. so i charge it and the apple screen comes up but stays frozen like that for a really long time, and then it just goes back to the "needs to be charged" screen. please help!
- First try resetting the iPOd. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Next connect to a computer and restore the iPod if theiPod appears in iTunes.
- Next see if placing he iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?
This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me
My iphone 5s 16 gb has an camera problem, turn the camera on tap all green, please help me
Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy -
I get a lock bios code of 60293385 please help
i get a lock bios code of 60293385 please help some times it is was a 5###### somthing?
Post most recent code here:
http://bios-pw.org/
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
My itunes in computer wont let me transfer my apps to my ipad. I have the latest version of itunes. Please help. When I press sync it says its syncing but at the end the apps are still not on my ipad.
I need help. Hope you could help me.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)
The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up. -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Maybe you are looking for
-
Unable to burst a report in 11.1.1.6.2 BP1
Unless you're interested in the Subject line, you may probably disregard this thread. I recreated the data model from scratch, including the bursting definitions, and everything works just fine now. Something screwy in the XML, I suppose. A bursted r
-
Linking Knowledge Directory to Oracle UCM
I have my Portal running in ALUI. I need to create a Knowledgebase – possibly external as this needs to be accessed by applications other than the portal as well – but I need to search/browse through this from the portal. The Search UI / inputs will
-
[solved] emerald seems running, but is not decorating windows
I'm trying to run compiz+emerald standalone. Emerald seems to be running, because I activated some plugins (ring switcher and windows previews) and they are working perfect. Also 'ps aux' reports emerald running, but I can't see windows decorations.
-
when I run dbv I see that filê#4 and block number 14532 is corrupted. But I cant see the object from thıs statment SELECT tablespace_name, segment_type, owner, segment_name FROM dba_extents where file_id =4 and block_ID =14532 no row returned
-
GroupConfig instead of PortConfig for writing multiple digi channels?
Hello, I have an old Programm in which a portname and a value is extracted from a cluster input and then the Port gets configured (PortConfig.vi) and the value is written (PortWrite.vi). Now with a DIO96 I have to Configure multiple Ports at a time (