I followed about:config to set the new tab to open my home page, but it is not working

i am using windows 8 and firefox version 20.0.1...
i tried to set the new tab page to open to my home page ... i followed the about:config, browser.newtab.url and set it to my home page ... but it is not working at all ... it still not open to my home page ... i saw it was changed to my homepage in the setting but it is just not working at all...
i quit firefox and open firefox again and the setting in browser.newtab.url back to the default ... the firefox did not save the setting in browser.newtab.url to my home page...
it works in mac but not windows...
IT IS NOT WORKING IN WINDOWS 8 ... WHY ... any help?...
cheers,

What page is opening? The default 9-thumbnail page? Some other page?
Extensions can override your selections for new tab, home page, and search provider. Try reviewing and disabling nonessential, recently installed, or unrecognized extensions here:
orange Firefox button (or Tools menu) > Add-ons > Extensions category

Similar Messages

  • I have tab mix plus and i have set the new tab to open my home page, no matter what i do I can't get the new tab of firefox to show up.

    I can't get the new feature of firefox 13 of the new tab.

    Find '''browser.newtab.url''' and double click on it (or right-click and select modify) and type your homepage you want, to open a new tab in your homepage.
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through a long procedure each time

    I want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through the long tedious procedure each time I install firefox. It is something that should be in the options tab , and I want to know why it isn't. I am totally frustrated with firefox and getting ready to switch.

    You can use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
    If you do not keep changes after a restart or otherwise have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • How do I set the new tab to open my homepage?

    If I press a new tab, it opens a whole selection of windows of recently browsed stuff, whereas I just want my search page repeated.

    Open a new window or tab. In the address bar, type '''''about:config'''''.
    If a warning screen comes up, press the '''''Be Careful''''' button.
    This is where Firefox finds information it needs to run.
    At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
    and press enter. '''''browser.newtab.url'''''
    tells Firefox what to show when a new tab is opened.
    If you want, right click and select '''''Modify'''''. You can change the
    setting to;<BR><BR>about:home (Firefox default home page),<BR>
    about:newtab (shows the sites most visited),<BR>
    about:blank (a blank page),<BR>
    or you can enter any web page you want.<BR><BR>
    The same instructions are used for the new window setting, listed as
    '''''browser.startup.homepage'''''.

  • I have set home page, what option do I use to set new tabs to open as home page?

    I have set home page default. What option do I use so that new tabs open as home page?

    You can look at this extension:
    * NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/

  • How do you set new tabs to open with home page

    when I open a new tab I would like it to open with my home page. Currently I have to click the home icon to go to my home page. The first tab opens with my home page but not extra ones.

    Remove the '''Searchqu''' Malware - see this: <br />
    https://support.mozilla.org/en-US/kb/removing-babylon-searchqu-or-mystart

  • How to set the new tab URL?

    == Issue
    ==
    I have a problem with my bookmarks, cookies, history or settings
    == Description
    ==
    How do I set the new tab URL? When I click on a new tab, this does not open my home page URL.
    == Firefox version
    ==
    3.6.6
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6 ( .NET CLR 3.5.30729)
    == Plugins installed
    ==
    *-Logitech Device Detection
    *Office Plugin for Netscape Navigator
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.3"
    *Default Plug-in
    *Provides additional functionality on Facebook. See our web site for details.
    *Shockwave Flash 10.0 r45
    *iTunes Detector Plug-in
    *4.0.50524.0
    *Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
    *Next Generation Java Plug-in 1.6.0_18 for Mozilla browsers
    *DRM Netscape Network Object
    *Npdsplay dll
    *DRM Store Netscape Plugin

    Middle-click the Home button instead.
    Or just install https://addons.mozilla.org/en-US/firefox/addon/777/

  • How do I set the new tab page

    how do I set the new tab page to a page of my choice?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    If you do not keep changes after a restart or otherwise have problems with preferences, see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • When opening a new tab, it opens onto a search engine, which is not what i want it to do. How do i resolve this and change it back to just a black page?

    when opening a new tab, it opens onto a search engine, which is not what i want it to do. How do i resolve this and change it back to just a black page?

    A new tab opens by default as a blank tab (about:blank).
    If that isn't the case then an extension has changed that behavior.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

    I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

    Hi ashleydanc588,
    If you are interested in more information on using an iMac in Target Display Mode, including what machines are compatible, you may find the following article helpful:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Regards,
    - Brenden

  • HT4108 I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

    I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

    If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
    If your new TV has a conventional VGA in and stereo inputs you can try this connector.
    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
    I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
    It won't be high resolution, but it will get you picture from iPad to TV.
    Good Luck.

  • I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file.  It says that I cannot complete this action because the file me be open in another application, but it is not open in another

    I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file.  I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem.  Thank you. Jeff

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal  simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphon

    My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal  simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphone without loss my date?
    Thanks

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • On iTunes 11.0, how do I delete and App from iTunes?  I tried selecting the App to be deleted and pressing Delete, but that did not work.

    On iTunes 11.0, how do I delete and App from iTunes?  I tried selecting the App to be deleted and pressing Delete, but that did not work.
    MoragaTom

    I have the same problem on my iPhone - an app I want to delete but can't. The app in question doesn't show up on the list of apps i iTunes and doesn't show an 'X' when it starts to wiggle. All the other apps do, but not this one. It's definitely an app. How do I get rid of it, please?

Maybe you are looking for

  • Time capsule can't recognize my airport express

    My system 10.5.4 was working fine until my modem died. I replaced the modem and then got my time capsule up and running. When I try to add my airport express (which I use to play music on my stereo) in airport utility I am able to find it only if I d

  • Activation problem

    my serial number is not working

  • Proper way to organize...newbie from AVID Xpro

    Been reading tutorials and experimenting...and I want to get this correct from the beginning. One big difference between AVID and FCP is importing files such as jpegs, audio clips, LiveType, etc. Here is my basic workflow, any input (pardon the pun)

  • Adjust the dimensions of the flash in html proportional

    Hi, I have this code that it's working: <object classid='clsid:D27CDB6E-AE6D-11cf-96B8-444553540000' codebase=' http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0' width='100%'> <param name=movie value=my_flash.swf>

  • Corrupted Preview [.jpg] But Image is Fine When Exported!

    Hello, I have an image that is corrupted when it is viewed within Aperture... i.e. the image is noisy and looks very over-sharpened. The image definitely didn't look like this when I imported it into my library. It's a .jpg with no Adjustments applie