I forgot my ipad passcode.  I tried to restore ipad using the recovery mode option.  However when I try this iTunes askes me to turn off the "find my ipad" option (which of course I cannot do as I cannot open the ipad).

I forgot my ipad passcode.  I tried:
1. Simply to restore the ipad on the computer it is normally synced with, but it askes me to enter the passcode.
2. to restore ipad using the recovery mode option.  However when I try this iTunes askes me to turn off the "find my ipad" cloud option (which of course I cannot do as I cannot open the ipad).
3. to remotely erase my ipad, but as it is locked down it does not seem to be connecting to the internet and hence cannot seen through my "find my ipad".
I am completely stuck!  Any suggestions please?!?!?

I forgot my ipad passcode.  I tried:
1. Simply to restore the ipad on the computer it is normally synced with, but it askes me to enter the passcode.
2. to restore ipad using the recovery mode option.  However when I try this iTunes askes me to turn off the "find my ipad" cloud option (which of course I cannot do as I cannot open the ipad).
3. to remotely erase my ipad, but as it is locked down it does not seem to be connecting to the internet and hence cannot seen through my "find my ipad".
I am completely stuck!  Any suggestions please?!?!?

Similar Messages

  • I tried to update my ipad air to 8.1, while istalling updates suddenly it went to recovery mode. Now when I try to restore factory settings it keeps restarting again and again.What shall I do in this situation?

    I tried to update my ipad air to 8.1, while istalling updates suddenly it went to recovery mode. Now when I try to restore factory settings it keeps restarting again and again.What shall I do in this situation?

    This is Linda again.  The new iPad actually as not restored on my employees computer. I thought it was working.  Message said the device is in recovery mode and can not be restored.  I have been at the Apple store for a total of 6 hours and on the phone with support for at least 4 hours.  And now the replacement has crashed???  Has this happened to any one else?

  • Hello, my ipad has been disabled, and it says that I need to connect to itunes. To solve this issue as instructed I connected to the find my iPad/iPhone site to put it on the recovery mode. However, I accidentally erased my account, so please help!!!

    Hello, my iPad has been disabled, and it says that I need to connect to iTunes. As instructed I connected to the find my iPad/iPhone site to put it on the recovery mode. However, I accidentally erased my account, so please help!!! Also, I browsed a lot to find a solution, but none of them were helpful, sorry. Hopping you could help, thank you.

    However, I accidentally erased my account,
    How did you erase your account?  A lot of people would like to know.  No one has found a way of erasing an Apple id account.
    Robert

  • My Ipad icloud account has been locked an now i want to delete it but i can't please help me because when u try to delete it it says "Turn Off Find My iPad?" when i press delete acoount and turn off it wants to fill the passwor field but it

    My Ipad icloud account has been locked an now i want to delete it but i can't please help me because when u try to delete it it says "Turn Off Find My iPad?" when i press delete acoount and turn off it wants to fill the passwor field but it says that you account has been locked for some security reasons and please help me to delete it.

    Go to Settings>icloud, scroll to bottom of screen and tap Delete Account.  Then log in using a different ID.

  • HT201210 I was just trying to restore my iPhone3G from recovery mode, but always received error code 1015. What shell I do to avoid this code?

    I was just trying to restore my iPhone3G from recovery mode, but always received error code 1015. What shell I do to avoid this code?

    Your phone is probably jailbroke

  • Forgot my itouch passcode and tried to restore, but doesnt restore.

    i forgot my itouch passcode somehow, and i tried to restore it like everyone says. so i plugged it into itunes, put it in recovery mode, restored it, waited 3 hours, and it went right back to my usual settings and im STILL LOCKED OUT. what does this mean? and what should i do? help please!!

    - Try placing it in DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik'ts scribblings
    - If you restored from backup. try restoring to facory defauls/new iPod
    - Could this beyur problem:
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • HT201210 I am trying to restore my ipod 4th 5.1.1, but when I try itune " the ipod couldnt be restored, an unknow error occured (3194). what should i do??

    I am Trying to restore my ipod 4th gen 5.1.1 but when i try to restore it in itunes "The ipod couldnt be restored, an unknow error occured (3194). what should i do?

    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes.
    Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • I'm trying to restore my ipod from recovery mode

    When trying to restore my ipod touch from recovery mode, i keep getting an error message "unknown error (1611)" Please help!!!

    - If the backup has a password (called encrypted backup) then you either have to remember password or correctly guess the passcode or set up the iPod as new.
    - A fw other users have reported the same problem. Tyr using other passwords like your Apple ID PW:

  • HT1810 Keep getting eror message: "Iphone ineligible for requested build" when trying to restore Iphone 3GS in recovery mode.All software up to date.

    Hi there,
    A bit of background: phone was thought stolen and declared to Police as such. Found it later and cancelled theft declaration. In meantime provider had blacklisted IMEI number. After IMEI number was rehabilitated, was instructed by provider to restore Iphone in Itunes to be able to use it again. But normal restore failed and phone got into recovery mode. Keep getting following error message: "Iphone could not be restored. This device isn't eligible for the requested build".
    Checked all software up-to-date. Tried to troubleshoot with test in Teminal, firewall off, identifying ports... Still getting same error message. Anybody successfully restored Iphone in similar situation? Any help much appreciated, thanks.

    https://discussions.apple.com/message/18851577#18851577

  • I recently purchased music on my iPhone (4) and am now trying to transfer those purchases onto my computer. However, when I try to play the music it says my computer isn't authorized to play it. I have already authorized this computer, what do I do?

    I tried unauthorizing then reauthorizing it but the same thing happened.

    Oh, and I'm not sure how relevant or necessary this information is, but the iTunes store on my computer doesn't work either, which led me to buy the music on my phone. I try to open it and the top says "Accessing iTunes Store..." and never gets past like a little bit less than half. I looked at some other discussions but none of the suggested solutions worked.

  • I have tried to update my iphone 4s to 8.1 and now it is in recovery mode. Now when I try to restore in hopes to get it back to normal, it extracts the software, re installs the device driver, and then tells me that the iphone cannot be found.

    It has been doing this for hours now and I would just like to fix it.

    Hi, francescakathleen.  
    Thank you for visiting Apple Support Communities.  
    When experiencing issues restoring an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT201263
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/en-us/HT201210
    Cheers,
    Jason H.

  • Been trying to restore iphone 4 in recovery mode but still not working

    while in the process of restoring my iphone 4, the message TO RESTORE IPHONE is still popping up.
    why is this so? does it affect my current download? ive been doing this process for the last 2 days.. please help.. thanksiphone 4

    https://discussions.apple.com/message/23087457#23087457

  • I put a passcode on my iPad 2, then I forgot it. I've tried to restore it in iTunes, but it still has the passcode on it. What do I do?

    I put a passcode on my iPad 2, then I forgot it. I've tried to restore it in iTunes, but it still has the passcode on it. What do I do?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present
    Connect the iPod to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.

  • Forgot my passcode lock tried to restore it but kept getting an error code 3194

    Forgot my passcode lock tried to restore it but kept getting an error code 3194

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?

    I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • My pictures have dissapeared

    Using Mac since 1985. Using iPhoto since its launch. Never happened before the following: my events and albums without notice have dissapeared from iPhoto. iPhoto Library occupies 107 GB My AirMac has 60 GB+ of memory still available. Went to "Import

  • MM, Vendor block, FK08 + XK05

    Hi, I have a requirement to block a vendor, not only for payment (in FK08 tcode), but for purchasing as well (XK05 tcode). I found a BTE event during Vendor save (xk1 / xk02). In my custom code there, I check if sensitive fields were changed (there i

  • Corrupted photos in iPhoto

    Hello,      So I have had some problems with some photos in my iPhoto library appearing to be corrupted somehow. I have tried to research the problem and fixes with no success. I shoot in RAW format with a Nikon D5100. Any information on what could b

  • Oracle8.1.7 - Can't log in to SQL*Plus

    I have just installed the Course Technology kit for Oracle8i (Oracle8i Personal Edition and Oracle Forms and Reports 6i). I am running Windows 98. I am able to start the database and have created the connect string in tnsnames.ora as instructed (I co

  • Troubleshooting (500) Internal Server Error

    Hi, What can I do to troubleshoot a webservice that once in a while (50% of the time) returns to the system caller  the following exception: System.Net.WebException: The remote server returned an error: (500) Internal Server Error. at System.Net.Http