I forgot my passcode can u help me please
hi i forgot my passcode can u help me please
If you restore your phone, from backup, on the last computer the phone synced with, this will remove the passcode.
Similar Messages
-
HT1212 My ipad was disabled after trying to unlock. I forgot my password, can you help me please
My ipad was disabled after trying to unlock, I forgot my password please help!!
iOS: Wrong passcode results in red disabled screen - http://support.apple.com/kb/ht1212 - entering wrong codes results in progressively longer lockout times until device must be restored completely.
Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password) -
I have forgotten my iphone passcode, can anyone help me please? thanks
I recently changed my iphone 4 passcode, soon i forgot it, i have tried and tried to remember but i cant.so now my iphone is disabled. i tried backing up my iphone on itunes but it told me that i need to turn off "find my iphone" on my device which i cant access, i ive looked online and i found out that i can go onto icloud and earase it that way. So i did, it then told me that it will be erased when my iphone is connected to the internet, sadly it is not connected. I dont know what to do. I would appreciate the help
If you forgot (or don't know) your passcode, restore the device with your backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode.
If you do not have access to the last computer it was synced with, or you've never synced, you will have to force it into recovery mode & restore as a new device or with an old backup if one is available.
See this for more info... http://support.apple.com/kb/HT1212 -
well i m having an iphone 45 which i puchaes second hand ,well when i upgraded my phone to ios7 its asking me a paascode ,n my phone is disabled ,i never put a passcode ,,can anyone help . any solutios
Try this. turn it off > hold power and home button uuntil it says connect to itunes with the connect picture on it > then connect it to itunes > its gunna say you need to restore the iphone. download the software. hope it helps.
-
HT201304 i have forgotten my restrictions passcode can anyone help me??
I locked my restrictions because my daughter that is 3 likes to delete my apps well i locked them using a passcode and have 27 failed attempts and obviously can not remember it can anyone help me please!!!!!!! i have restored it and still cant unlock it
The Restrictions passcode is included with the iPhone's backup so if you don't know the restrictions passcode, you must restore your iPhone as a new iPhone or not from the backup.
-
Forgotten passcode, can anyone help
I put a passcode on my Ipod touch but I can't remember what it was now. I have read the manual on how to restore, but I can't because my ipod doesn't show up in itunes to be able to restore it. Can anyone help me please.
Ok I figured it out!!! YAY
If anyone else has this problem, here is what I did...
1. Connect Ipod to Itunes
2. Press and hold the power and the home buttons for 10 seconds (until screen goes black)
3. Once screen is black, release the power button (make sure you don't release the home button)
4. When Itunes says "we have detected an itouch in recovery mode" then release the home button.
5. Then in Itunes under the summary tab, hit the restore button and wait.
It took about 20 minutes but at least now I have my Ipod back. -
hello I have a I phone 5 and I want to reset it but I don't know my restrictions passcode. can you help me?
You would need to restore as new if you cannot remember the restrictions code you set.
-
Hello
I have a problem in calculating the apple id Can you help me please
I forgot answer security questions for your account How can knowledge
Please help
Please reply as soon as possible
I can not buy from camels Store
And the rest of the account balance $25
Message was edited by: lingo azamI think you mean App Store.
Rescue email address and how to reset Apple ID security questions -
My little children Majd entered the wrong passcode for more than 10 times, my iPhone automatically got reset all data was deleted. I managed to retrieve the contacts only but I'm unable to retrieve my SMS's and my photos???? Can you help me please ???
Hi,
Did you ever back up your phone on the computer?
Did you use photo stream at all?
May I suggest changing your passcode lock to a letters and numbers lock (if not all ready it will make your iphone more secure and a restore lock otion shouldent be needed). Then change your setting as well preventing restore after ten incorect passwords.
kc -
I forgot my security questions for my apple ID i wanted to buy a game but i cant without knowing it. Can you help me please?
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action -
I forgot restrection passcode. Pleas help me . Without code all seting are not active. Iphone 4 . Ios 6.1 . Few days ago update. Pleas help
A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here. -
MY TELEPHONE STOLEN TODAY AND THE SERIAL NO. JR130L26DZZ I WANT TO CLEAR EVERY THING INSIDE THIS TELEPHONE PLEASE & THE I CLOUD CAN'T HELP ME PLEASE SOLVE THIS today ASAP
delete every thing and if you can damged the software no problem because i have many important thingAnd if you didn't set up Find My iPhone, or it's not appearing in the Find My iPhone section of iCloud.com, then there's no way you can wipe the iPhone remotely. If, however, you set up a screenlock password, then someone would need to restore the iPhone to get past the passcode which will erase everything on the iPhone, and if you set the option to erase the iPhone after ten failed attempts at the passcode, your data is even more inaccessible.
By the way, please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
Regards. -
BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.
All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug! -
Hello again:
Please run my coding first, and get some view from my coding.
I want to add a table(it is from TableRenderDemo) to a JFrame when I click on the button(from DrawCalendar) of the numer 20, and I want the table disply under the buttons(from DrawCalendar), and the table & buttons all appear on the frame. I added some code for this problem(in the EventHander of the DrawCalendar class), but I do
not known why it can not work.Please help me to solve this problem.
Can anyone help me, please.
Thanks.
*This program for add some buttons to JPanel
*and add listeners to each button
*I want to display myTable under the buttons,
*when I click on number 20, but why it doesn't
*work, The coding for these part are indicated by ??????????????
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.GridLayout;
public class DrawCalendar extends JPanel {
private static DrawCalendar dC;
private static TestMain tM;
private static TableRenderDemo myTable;
private static GridLayout gL;
private static final int nlen = 35;
private static String names[] = new String[nlen];
private static JButton buttons[] = new JButton[nlen];
public DrawCalendar(){
gL=new GridLayout(5,7,0,0);
setLayout(gL);
assignValues();
addJButton();
registerListener();
//assign values to each button
private void assignValues(){
names = new String[35];
for(int i = 0; i < names.length; i++)
names[i] = Integer.toString(i + 1);
//create buttons and add them to Jpanel
private void addJButton(){
buttons=new JButton[names.length];
for (int i=0; i<names.length; i++){
buttons=new JButton(names[i]);
buttons[i].setBorder(null);
buttons[i].setBackground(Color.white);
buttons[i].setFont(new Font ("Palatino", 0,8));
add(buttons[i]);
//add listeners to each button
private void registerListener(){
for(int i=0; i<35; i++)
buttons[i].addActionListener(new EventHandler());
//I want to display myTable under the buttons,
//when I click on number 20, but why it doesn't
//work
private class EventHandler implements ActionListener{
public void actionPerformed(ActionEvent e){
for(int i=0; i<35; i++){
//I want to display myTable under the buttons,
//when I click on number 20, but why it doesn't
//work
if(i==20){ //???????????
tM=new TestMain(); //???????
tM.c.removeAll(); //??????
tM.c.add(dC); //???????
tM.c.add(myTable); //????
tM.validate();
if(e.getSource()==buttons[i]){
System.out.println("testing " + names[i]);
break;
*This program create a table with some data
import javax.swing.table.AbstractTableModel;
import javax.swing.table.TableColumn;
import javax.swing.DefaultCellEditor;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class TableRenderDemo extends JScrollPane {
private boolean DEBUG = true;
public TableRenderDemo() {
// super("TableRenderDemo");
MyTableModel myModel = new MyTableModel();
JTable table = new JTable(myModel);
table.setPreferredScrollableViewportSize(new Dimension(700, 70));//500,70
//Create the scroll pane and add the table to it.
setViewportView(table);
//Set up column sizes.
initColumnSizes(table, myModel);
//Fiddle with the Sport column's cell editors/renderers.
setUpSportColumn(table.getColumnModel().getColumn(2));
* This method picks good column sizes.
* If all column heads are wider than the column's cells'
* contents, then you can just use column.sizeWidthToFit().
private void initColumnSizes(JTable table, MyTableModel model) {
TableColumn column = null;
Component comp = null;
int headerWidth = 0;
int cellWidth = 0;
Object[] longValues = model.longValues;
for (int i = 0; i < 5; i++) {
column = table.getColumnModel().getColumn(i);
try {
comp = column.getHeaderRenderer().
getTableCellRendererComponent(
null, column.getHeaderValue(),
false, false, 0, 0);
headerWidth = comp.getPreferredSize().width;
} catch (NullPointerException e) {
System.err.println("Null pointer exception!");
System.err.println(" getHeaderRenderer returns null in 1.3.");
System.err.println(" The replacement is getDefaultRenderer.");
comp = table.getDefaultRenderer(model.getColumnClass(i)).
getTableCellRendererComponent(
table, longValues[i],
false, false, 0, i);
cellWidth = comp.getPreferredSize().width;
if (DEBUG) {
System.out.println("Initializing width of column "
+ i + ". "
+ "headerWidth = " + headerWidth
+ "; cellWidth = " + cellWidth);
//XXX: Before Swing 1.1 Beta 2, use setMinWidth instead.
column.setPreferredWidth(Math.max(headerWidth, cellWidth));
public void setUpSportColumn(TableColumn sportColumn) {
//Set up the editor for the sport cells.
JComboBox comboBox = new JComboBox();
comboBox.addItem("Snowboarding");
comboBox.addItem("Rowing");
comboBox.addItem("Chasing toddlers");
comboBox.addItem("Speed reading");
comboBox.addItem("Teaching high school");
comboBox.addItem("None");
sportColumn.setCellEditor(new DefaultCellEditor(comboBox));
//Set up tool tips for the sport cells.
DefaultTableCellRenderer renderer =
new DefaultTableCellRenderer();
renderer.setToolTipText("Click for combo box");
sportColumn.setCellRenderer(renderer);
//Set up tool tip for the sport column header.
TableCellRenderer headerRenderer = sportColumn.getHeaderRenderer();
if (headerRenderer instanceof DefaultTableCellRenderer) {
((DefaultTableCellRenderer)headerRenderer).setToolTipText(
"Click the sport to see a list of choices");
class MyTableModel extends AbstractTableModel {
final String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
final Object[][] data = {
{"Mary ", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Chasing toddlers", new Integer(2), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Integer(20), new Boolean(true)},
{"Angela", "Lih",
"Teaching high school", new Integer(4), new Boolean(false)}
public final Object[] longValues = {"Angela", "Andrews",
"Teaching high school",
new Integer(20), Boolean.TRUE};
public int getColumnCount() {
return columnNames.length;
public int getRowCount() {
return data.length;
public String getColumnName(int col) {
return columnNames[col];
public Object getValueAt(int row, int col) {
return data[row][col];
* JTable uses this method to determine the default renderer/
* editor for each cell. If we didn't implement this method,
* then the last column would contain text ("true"/"false"),
* rather than a check box.
public Class getColumnClass(int c) {
return getValueAt(0, c).getClass();
* Don't need to implement this method unless your table's
* editable.
public boolean isCellEditable(int row, int col) {
//Note that the data/cell address is constant,
//no matter where the cell appears onscreen.
if (col < 2) {
return false;
} else {
return true;
* Don't need to implement this method unless your table's
* data can change.
public void setValueAt(Object value, int row, int col) {
if (DEBUG) {
System.out.println("Setting value at " + row + "," + col
+ " to " + value
+ " (an instance of "
+ value.getClass() + ")");
if (data[0][col] instanceof Integer
&& !(value instanceof Integer)) {
//With JFC/Swing 1.1 and JDK 1.2, we need to create
//an Integer from the value; otherwise, the column
//switches to contain Strings. Starting with v 1.3,
//the table automatically converts value to an Integer,
//so you only need the code in the 'else' part of this
//'if' block.
try {
data[row][col] = new Integer(value.toString());
fireTableCellUpdated(row, col);
} catch (NumberFormatException e) {
JOptionPane.showMessageDialog(TableRenderDemo.this,
"The \"" + getColumnName(col)
+ "\" column accepts only integer values.");
} else {
data[row][col] = value;
fireTableCellUpdated(row, col);
if (DEBUG) {
System.out.println("New value of data:");
printDebugData();
private void printDebugData() {
int numRows = getRowCount();
int numCols = getColumnCount();
for (int i=0; i < numRows; i++) {
System.out.print(" row " + i + ":");
for (int j=0; j < numCols; j++) {
System.out.print(" " + data[i][j]);
System.out.println();
System.out.println("--------------------------");
*This program for add some buttons and a table on JFrame
import java.awt.*;
import javax.swing.*;
public class TestMain extends JFrame{
private static TableRenderDemo tRD;
private static TestMain tM;
protected static Container c;
private static DrawCalendar dC;
public static void main(String[] args){
tM = new TestMain();
tM.setVisible(true);
public TestMain(){
super(" Test");
setSize(800,600);
//set up layoutManager
c=getContentPane();
c.setLayout ( new GridLayout(3,1));
tRD=new TableRenderDemo();
dC=new DrawCalendar();
addItems();//add Buttons to JFrame
private void addItems(){
c.add(dC); //add Buttons to JFrame
//c.add(tRD); //add Table to JFrameClick Here and follow the steps to configure your Linksys Router with Version FIOS.
-
in the previous version of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?
Hi silvano,
If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
Start in Cell B2
1 Tab 2 Tab 3 Enter
4 Tab 5 Tab 6 Enter
7 Tab 8 Tab 9 Enter
Now you are ready to type into B5 .
Another way that some people find easier is to enter one column at a time
Start at B2
1 enter
4 enter
7 enter
etc.
Now start with C2.
Use whatever suits your work flow.
Regards,
Ian.
Maybe you are looking for
-
Ora-00604 error and ora 01000 error while report generation.
hi all, I am trying to generate the multiple reports of same template through a program. While this job is running, i get the following error at the BIP console and the reports don't get generated. [101711_044115578][][EXCEPTION] java.sql.SQLExceptio
-
CX_SY_CONVERSION_NO_NUMBER dump coming
CX_SY_CONVERSION_NO_NUMBER dump appears when key is sleected in transaction WTYRCL. Unable to interpret " " as a number. An exception occurred that is explained in detail below. The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMB ca
-
I get "medium write error" when trying to burn cds
I tried to burn a playlist from iTunes and it burned one copy, then when I tried to burn a second copy my computer made alot of noise during the "initializing/finishing" stage, spit the cd out and said "medium write error" - i've tried another cd, an
-
CS3 / Win: Observe copy/paste action of a page item
Hi I like to observe the manual copy and paste of a page item. How can I do that? What do I have to attach to the observer? I get the action kAddToHierarchyCmdBoss and kNewPageItemCmdBoss when I copy and paste a page item. this works. Now the problem
-
Hello, I've just installed lxqt and by and large it runs well other than I experience random freezes. I would like to submit a bug report but I don't know what file should I attach to the report and where to submit.