I forgot my username password. Cant log in! Currently using guest user
I forgot my username password. Cant log in! Currently using guest
Doesn't sound like what was written, but perhaps the mods thought there was some reference to getting in through SU Mode? The usual password reset from the DVD instructions don't bring this on. (And very rarely even the SU Mode one.)
If not that, then very strange. Maybe a pet cat or hamster ran across someone's keyboard at Apple.
Similar Messages
-
Hi, I have an iCloud account with a different iCloud username and password then my Apple ID. I forgot my iCloud password and the email I used is no longer in use. How do I change my iCloud Username and password to match my Apple ID one? Thanks in advance
Hi Cplantin!
Here is an article for you that will help you with this question:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I cannot email a photo using iPhoto "share. I keep getting "username/password not recognized". I used to use this function all the time but all of a sudden, I keep getting this message.
In iPhoto, open Preferences (under iPhoto in the menu bar) and click the "Accounts" tab on top. Make sure your email account(s) is/are set up there correctly, just as they are in Apple's Mail. Make sure the password in included.
-
I forgot my backup password of my iPhone. i use windows in my computer
i forgot my backup password of my iPhone. i use windows in my computer
Sorry, did not pay attention and missed the "backup password" part
http://support.apple.com/kb/HT4946
Basically, you can continue to sync and backup, but you will not be able to restore any data from the encrypted backup without the password. All you can do is restore the device as new and start fresh. -
Im able to log in with 2 different passwords. I am currently using a xfinity modem and TC 2TB. Please help!!
I am not sure of the problem..
Is the TC the main router of the network or is it in bridge??
Is the Xfinitiy a router.. I thought they generally are.. so have you turned off the wireless?
Please do clear out all the old names from your phone and mac.. so it is completely empty.. power off the device.. restart and go through the discovery again. Make sure you save the password so you are automatically logged in. But when you leave and come back you still have to select the correct wireless unless you have the order correct.. !!
The reset the TC to factory and start over.
Give it new names.. use names that are short, no spaces and pure alphanumeric.
For total control use different names for each band.
Use only WPA2 Personal security with 10-20 character pure alphanumeric password. Can be mixed case and numbers. -
I cannot log into oracle using the user scott
I installed oracle, but I did not go through the underlined step. I am not sure if I skipped or it was not there during the installation
The Database Configuration Assistant will provide installation summary
and list the accounts that are unlocked. It will ask you for password management. Sys
and System accounts would be already unlocked. Unlock HR and Scott accounts,
and for these two accounts also specify the same password that you had given before.
When I test logging into Oracle using the user Scott, it shuts down.
I am using windows 7, and I installed Oracle Database 10g Release 2 (10.2.0.1.0)
Enterprise/Standard Edition for Microsoft Windows (32-bit)
How can I log into oracle using the user Scott?Hi,
Welcome to the forum,
After installing Oracle 10g SCOTT user will be in locked, you should unlock it.
Login as sysdba using the below command
sqlplus sys as sysdba
password:<ur password>
after connecting as sysdba use the below command to unlock the SCOTT user
ALTER USER SCOTT ACCOUNT UNLOCK;
Now connect as scott you will bw able to connect.
hari -
OMBPlus: masking usernames / passwords in log files with ********?
Hi all,
Subjects says it: how to hide username and password in OMBPlus logs.
Any ideas...?
Br: YkspistoI don't use default OMB+ logging for this reason, plus I often want more robust logging. I also built a wrapper for executing OMB+ statements to simplify my exception handling in my main scripts. By catching both the return string from a statement as well as the exception strings, I keep full control over what gets logged.
HEre is the meat of my main library file:
# PVCS Version Information
#/* $Workfile: omb_library.tcl $ $Revision: 2.9 $ */
#/* $Author: michael.broughton $
#/* $Date: 10 Mar 2009 11:04:50 $ */
# Default logging function.
# Accepts inputs: LOGMSG - a text string to output
proc log_msg {LOGTYPE LOGMSG} {
#logs to screen and file
global SPOOLFILE
if {![info exists SPOOLFILE]} {
puts "LOGFILE UNDEFINED! :-> $LOGTYPE:-> $LOGMSG"
} else {
set fout [open "$SPOOLFILE" a+]
puts $fout "$LOGTYPE:-> $LOGMSG"
puts "$LOGTYPE:-> $LOGMSG"
close $fout
proc log_msg_file_only {LOGTYPE LOGMSG} {
#logs to file only
global SPOOLFILE
if {![info exists SPOOLFILE]} {
puts "LOGFILE UNDEFINED! :-> $LOGTYPE:-> $LOGMSG"
} else {
set fout [open "$SPOOLFILE" a+]
puts $fout "$LOGTYPE:-> $LOGMSG"
close $fout
proc exit_failure { msg } {
log_msg ERROR "$msg"
log_msg ERROR "Rolling Back....."
exec_omb OMBROLLBACK
log_msg ERROR "Exiting....."
# return and also bail from calling function
return -code 2
proc exec_omb { args } {
# Uncomment if you want all source commands spooled out to log
# disabled in production to avoid logging passwords.
# log_msg_file_only OMBCMD "$args"
# the point of this is simply to return errorMsg or return string, whichever is applicable,
# to simplify error checking using omb_error{}
if [catch { set retstr [eval $args] } errmsg] {
log_msg OMB_ERROR "$errmsg"
log_msg "" ""
return $errmsg
} else {
log_msg OMB_SUCCESS "$retstr"
log_msg "" ""
return $retstr
proc omb_error { retstr } {
# OMB and Oracle errors may have caused a failure.
if [string match OMB0* $retstr] {
return 1
} elseif [string match ORA-* $retstr] {
return 1
} elseif [string match java.* $retstr] {
return 1
} elseif [string match Error* $retstr] {
return 1
} else {
return 0
proc ers_omb_connect { OWB_USER OWB_PASS OWB_HOST OWB_PORT OWB_SRVC OWB_REPOS } {
# Commit anything from previous work, otherwise OMBDISCONNECT will fail out.
catch { set retstr [ OMBSAVE ] } errmsg
log_msg LOG "Checking current connection status...."
#Ensure that we are not already connected.
if [catch { set discstr [ OMBDISCONNECT ] } errmsg ] {
set discstr $errmsg
# Test if message is "OMB01001: Not connected to repository." or "Disconnected."
# any other message is a showstopper!
if [string match Disconn* $discstr ] {
log_msg LOG "Success Disconnecting from previous repository...."
} else {
# We expect an OMB01001 error for trying to disconnect when not connected
if [string match OMB01001* $discstr ] {
log_msg LOG "Disconnect unneccessary. Not currently connected...."
} else {
log_msg ERROR "Error Disconnecting from previous repository....Exiting process."
exit_failure "$discstr"
set print [exec_omb OMBCONNECT $OWB_USER/$OWB_PASS@$OWB_HOST:$OWB_PORT:$OWB_SRVC USE REPOSITORY '$OWB_REPOS']
if [string match *Connected* $print] {
return $print
} else {
return "OMB0-Unknown Error connecting. Validate connection settings and try again"
}and I handle setting up the log file with a standard header at the top of each script, as illustrated here in a script I use to set up and register a location and control centers for when we build a new dev environment. Most of the referenced variables are held in a config script that we use to define our current working environment, which I am not attaching as the names are pretty descriptive I think.
# PVCS Version Information
#/* $Workfile: setup_dev_location.tcl $ $Revision: 2.1 $ */
#/* $Author: michael.broughton $
#/* $Date: 27 Nov 2008 10:00:00 $ */
# Get Current Directory and time
# supporting config and library files must be in the same directory as this script
set dtstmp [ clock format [clock seconds] -format {%Y%m%d_%H%M}]
set scrpt [ file split [file root [info script]]]
set scriptDir [ file dirname [info script]]
set scriptName [ lindex $scrpt [expr [llength $scrpt]-1]]
set cnfg_lib "$scriptDir/ombplus_config.tcl"
set owb_lib "$scriptDir/omb_library.tcl"
set sql_lib "$scriptDir/omb_sql_library.tcl"
# Import Lbraries
#get config file
source $cnfg_lib
#get standard library
source $owb_lib
#get SQL library
source $sql_lib
# Set Logfile
# This will overwrite anything set in the config file.
set LOG_PATH "$scriptDir/logs"
file mkdir $LOG_PATH
set SPOOLFILE ""
append SPOOLFILE $LOG_PATH "/log_" $scriptName "_" $dtstmp ".txt"
# Connect to repos
set print [ers_omb_connect $OWB_DEG_USER $OWB_DEG_PASS $OWB_DEG_HOST $OWB_DEG_PORT $OWB_DEG_SRVC $OWB_DEG_REPOS]
if [omb_error $print] {
log_msg ERROR "Unable to connect to repository."
log_msg ERROR "$print"
log_msg ERROR "Exiting Script.............."
return
} else {
log_msg LOG "Connected to Repository"
# Connect to project
set print [exec_omb OMBCC '$PROJECT_NAME']
if [omb_error $print] {
exit_Failure "Project $PROJECT_NAME does not exist. Exiting...."
} else {
log_msg LOG "Switched context to project $PROJECT_NAME"
# Check Existance of Oracle Module
set print [exec_omb OMBCC '$ORA_MODULE_NAME']
if [omb_error $print] {
exit_Failure "Module $ORA_MODULE_NAME does not exist. Creating...."
} else {
log_msg LOG "Confirmed existance of module $ORA_MODULE_NAME"
#switch back up to project level. You cannot attach locations to a module if you are in it.
exec_omb OMBCC '..'
log_msg LOG "Switched context back up to project $PROJECT_NAME"
# Force Re-registration of OWB User
log_msg LOG "(Re-)Registering user $DATA_LOCATION_USER"
log_msg LOG "Disconnecting from Corporate Design Repository"
exec_omb OMBCOMMIT
exec_omb OMBDISCONNECT
log_msg LOG "Connecting to Runtime Repository"
set print [ers_omb_connect $CONTROL_CENTER_SCHEMA $CONTROL_CENTER_PASS $DATA_LOCATION_HOST $DATA_LOCATION_PORT $DATA_LOCATION_SRVC $CONTROL_CENTER_SCHEMA]
set print [ exec_omb OMBUNREGISTER USER '$DATA_LOCATION_USER' IDENTIFIED BY '$DATA_LOCATION_PASS' ]
set print [ exec_omb OMBREGISTER USER '$DATA_LOCATION_USER' SET PROPERTIES (DESCRIPTION, ISTARGETSCHEMA, TARGETSCHEMAPWD) VALUES ('$DATA_LOCATION_USER', 'true', '$DATA_LOCATION_PASS')]
if [omb_error $print] {
exit_failure "Unable to register user '$DATA_LOCATION_USER'"
log_msg LOG "Disconnecting from Runtime Repository"
exec_omb OMBCOMMIT
exec_omb OMBDISCONNECT
log_msg LOG "Re-Connecting to Corporate Design Repository"
set print [ers_omb_connect $OWB_DEG_USER $OWB_DEG_PASS $OWB_DEG_HOST $OWB_DEG_PORT $OWB_DEG_SRVC $OWB_DEG_REPOS]
log_msg LOG "Changing context back to project $PROJECT_NAME"
set print [exec_omb OMBCC '$PROJECT_NAME']
# Validate to Control Center
set lst [OMBLIST CONTROL_CENTERS]
if [string match *$CONTROL_CENTER_NAME* $lst] {
log_msg LOG "Verified Control Center $CONTROL_CENTER_NAME Exists."
set lst [OMBLIST LOCATIONS]
if [string match *$DATA_LOCATION_NAME* $lst] {
log_msg LOG "Verified Location $DATA_LOCATION_NAME Exists."
log_msg LOG "Setting Control Center as default control center for project"
exec_omb OMBCC 'DEFAULT_CONFIGURATION'
set print [exec_omb OMBALTER DEPLOYMENT 'DEFAULT_DEPLOYMENT' SET REF CONTROL_CENTER '$CONTROL_CENTER_NAME' ]
if [omb_error $print] {
exit_failure "Unable to set Control Center $CONTROL_CENTER_NAME in default configuration"
exec_omb OMBCOMMIT
exec_omb OMBCC '..'
log_msg LOG "Setting Passwords to enable import and deploy"
set print [exec_omb OMBALTER LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (PASSWORD) VALUES ('$DATA_LOCATION_PASS')]
if [omb_error $print] {
exit_failure "Unable to log onto location '$DATA_LOCATION_NAME' with password $DATA_LOCATION_PASS"
exec_omb OMBCOMMIT
log_msg LOG "Connecting to Control Center $CONTROL_CENTER_NAME"
set print [exec_omb OMBCONNECT CONTROL_CENTER USE '$DATA_LOCATION_PASS' ]
if [omb_error $print] {
exit_failure "Unable to connect to Control Center $CONTROL_CENTER_NAME"
exec_omb OMBCOMMIT
log_msg LOG "Connected.............."
} else {
log_msg LOG "Control Center Exists, but Location Does Not."
log_msg LOG "Creating Code Location."
log_msg LOG "Checking Global_names...."
set dbGlobalNames FALSE
set oraConn [oracleConnect $OWB_DEG_HOST $OWB_DEG_SRVC $OWB_DEG_PORT $OWB_DEG_USER $OWB_DEG_PASS ]
set oraRs [oracleQuery $oraConn "select value pvalue FROM V\$PARAMETER where name = 'global_names'"]
while {[$oraRs next]} {
set dbGlobalNames [$oraRs getString pvalue]
$oraRs close
$oraConn close
log_msg LOG "Global_names are $dbGlobalNames...."
if [string match TRUE $dbGlobalNames] {
set print [exec_omb OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD, DATABASE_NAME) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS','$DATA_LOCATION_SRVC' ) ]
} else {
set print [exec_omb OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS') ]
if [omb_error $print] {
exit_failure "Unable to create location '$DATA_LOCATION_NAME'"
exec_omb OMBSAVE
log_msg LOG "Adding Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
set print [exec_omb OMBALTER CONTROL_CENTER '$CONTROL_CENTER_NAME' ADD REF LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (IS_TARGET, IS_SOURCE) VALUES ('true', 'true') ]
if [omb_error $print] {
exit_failure "Unable to add Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
exec_omb OMBCOMMIT
log_msg LOG "Setting Control Center as default control center for project"
exec_omb OMBCC 'DEFAULT_CONFIGURATION'
set print [exec_omb OMBALTER DEPLOYMENT 'DEFAULT_DEPLOYMENT' SET REF CONTROL_CENTER '$CONTROL_CENTER_NAME' ]
if [omb_error $print] {
exit_failure "Unable to set Control Center $CONTROL_CENTER_NAME in default configuration"
exec_omb OMBCOMMIT
exec_omb OMBCC '..'
log_msg LOG "Connecting to Control Center $CONTROL_CENTER_NAME"
set print [exec_omb OMBCONNECT CONTROL_CENTER USE '$DATA_LOCATION_PASS' ]
if [omb_error $print] {
exit_failure "Unable to connect to Control Center $CONTROL_CENTER_NAME"
exec_omb OMBCOMMIT
log_msg LOG "Registering Code Location."
set print [exec_omb OMBALTER LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (PASSWORD) VALUES ('$DATA_LOCATION_PASS')]
exec_omb OMBCOMMIT
set print [exec_omb OMBREGISTER LOCATION '$DATA_LOCATION_NAME']
if [omb_error $print] {
exit_failure "Unable to register Location $DATA_LOCATION_NAME"
exec_omb OMBCOMMIT
} else {
log_msg LOG "Need to create Control Center $CONTROL_CENTER_NAME."
log_msg LOG "Creating Code Location."
log_msg LOG "Checking Global_names...."
set dbGlobalNames FALSE
set oraConn [oracleConnect $DATA_LOCATION_HOST $DATA_LOCATION_SRVC $DATA_LOCATION_PORT $CONTROL_CENTER_SCHEMA $CONTROL_CENTER_PASS ]
set oraRs [oracleQuery $oraConn "select value pvalue FROM V\$PARAMETER where name = 'global_names'"]
while {[$oraRs next]} {
set dbGlobalNames [$oraRs getString pvalue]
$oraRs close
$oraConn close
log_msg LOG "Global_names are $dbGlobalNames...."
if [string match TRUE $dbGlobalNames] {
set print [exec_omb OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD, DATABASE_NAME) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS','$DATA_LOCATION_SRVC' ) ]
} else {
set print [exec_omb OMBCREATE LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (TYPE, VERSION, DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE, CONNECT_AS_USER, PASSWORD) VALUES ('ORACLE_DATABASE','$DATA_LOCATION_VERS','ERS Datamart Code User','$DATA_LOCATION_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER','$DATA_LOCATION_PASS') ]
if [omb_error $print] {
exit_failure "Unable to create location '$DATA_LOCATION_NAME'"
exec_omb OMBCOMMIT
log_msg LOG "Creating Control Center"
set print [exec_omb OMBCREATE CONTROL_CENTER '$CONTROL_CENTER_NAME' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME, HOST, PORT, SERVICE_NAME, USER, SCHEMA, PASSWORD) VALUES ('ERS Datamart Control Center','$CONTROL_CENTER_NAME', '$DATA_LOCATION_HOST','$DATA_LOCATION_PORT','$DATA_LOCATION_SRVC', '$DATA_LOCATION_USER', '$CONTROL_CENTER_SCHEMA','$DATA_LOCATION_PASS') ]
if [omb_error $print] {
exit_failure "Unable to create control center '$CONTROL_CENTER_NAME'"
exec_omb OMBCOMMIT
log_msg LOG "Adding Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
set print [exec_omb OMBALTER CONTROL_CENTER '$CONTROL_CENTER_NAME' ADD REF LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (IS_TARGET, IS_SOURCE) VALUES ('true', 'true') ]
if [omb_error $print] {
exit_failure "Unable to add Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
exec_omb OMBCOMMIT
log_msg LOG "Setting Control Center as default control center for project"
exec_omb OMBCC 'DEFAULT_CONFIGURATION'
set print [exec_omb OMBALTER DEPLOYMENT 'DEFAULT_DEPLOYMENT' SET REF CONTROL_CENTER '$CONTROL_CENTER_NAME' ]
if [omb_error $print] {
exit_failure "Unable to set Control Center $CONTROL_CENTER_NAME in default configuration"
exec_omb OMBCOMMIT
exec_omb OMBCC '..'
log_msg LOG "Connecting to Control Center $CONTROL_CENTER_NAME"
set print [exec_omb OMBCONNECT CONTROL_CENTER USE '$DATA_LOCATION_PASS' ]
if [omb_error $print] {
exit_failure "Unable to add Location $DATA_LOCATION_NAME to Control Center $CONTROL_CENTER_NAME"
exec_omb OMBCOMMIT
log_msg LOG "Registering Code Location."
set print [exec_omb OMBALTER LOCATION '$DATA_LOCATION_NAME' SET PROPERTIES (PASSWORD) VALUES ('$DATA_LOCATION_PASS')]
exec_omb OMBCOMMIT
set print [exec_omb OMBREGISTER LOCATION '$DATA_LOCATION_NAME']
if [omb_error $print] {
exit_failure "Unable to register Location $DATA_LOCATION_NAME"
exec_omb OMBCOMMIT
# Assign location to Oracle Module
log_msg LOG "Assigning Code Location to Oracle Module."
set print [ exec_omb OMBALTER ORACLE_MODULE '$ORA_MODULE_NAME' ADD REFERENCE LOCATION '$DATA_LOCATION_NAME' SET AS DEFAULT ]
if [omb_error $print] {
exit_failure "Unable to add reference location '$DATA_LOCATION_NAME' to module '$ORA_MODULE_NAME' "
set print [ exec_omb OMBALTER ORACLE_MODULE '$ORA_MODULE_NAME' SET REFERENCE METADATA_LOCATION '$DATA_LOCATION_NAME' ]
if [omb_error $print] {
exit_failure "Unable to set metadata location '$DATA_LOCATION_NAME' on module '$ORA_MODULE_NAME' "
set print [ exec_omb OMBALTER ORACLE_MODULE '$ORA_MODULE_NAME' SET PROPERTIES (DB_LOCATION) VALUES ('$DATA_LOCATION_NAME') ]
if [omb_error $print] {
lexit_failure "Unable to add db_location '$DATA_LOCATION_NAME' to module '$ORA_MODULE_NAME' "
exec_omb OMBCOMMIT
exec_omb OMBDISCONNECT -
How to retrieve the username/password of logged user so to use web services
Hi Experts,
we are using web services from a web dynpro application, the web services we use are CAF web services; actually we are "hardcoding" username and password so to be able to execute these web services, using this code before calling the web service:
wdContext.currentRequest_ReporteDeRendicionDetallada_RElement().modelObject().setInvokerProperty(javax.xml.rpc.Stub.USERNAME_PROPERTY,"testuser");
wdContext.currentRequest_ReporteDeRendicionDetallada_RElement().modelObject().setInvokerProperty(javax.xml.rpc.Stub.PASSWORD_PROPERTY,"testpassword");
but as this is not a very good practice, we want to replace the "testuser" with the logged user and, of course, retrieve the password and use it instead of "testpassword".
How can we achieve this? I couldn´t find any tips on this.
Best regards,
Marco.Hello,
thanks for your anwsers, although I´ve followed both links I couldn´t find the answer to my problem.
I need to know how to retreive user and password from the UME of the portal so to be able to execute web services in the java stack, the UME is connected to a LDAP in our corporation.. so may be the passwords are not stored in the UME?
If it is not possible to retrieve the passwords of the users , which is the best practice to deal with username/passwords to execute CAF webservices from web dynpro java? Hardcoding is not a very good practice..
Best regards,
Marco. -
I forgot my keychain password and I Canot use my mac book so can u plz help me out
iOS doesn't run on MacBook Pros. You need to properly identify your Mac OS X version, and then read:
Apple Article to reset the password -
Forgot my emergency password because I've been using thumb swipe
I forgot my emergency password because I entered it the day I got my phone but have been using thumb swipe since. I tried what I thought was the password and a few variations on it and now have 4 attempts to complete it successfully before it resorts to factory settings. I tried calling it with Android Device Tracker but it never rang. I don't have my location on on the phone. Does anyone know how to help me?
If for what ever reason Google Device manager won't work for you, then you will need to do the FDR. Sorry
-
The migration assistant (PC Windows Vista Premium edition to MAC) has created a new user on the MAC. Unfortunately it is impossible to log the system in using that user: no password accepted. I tried to change the user password but the login result still impossible.
Thanks in advance for any suggestions.Hi user,
Welcome to OTN world.Always share your Jdev version.
Why are you not storing the login user name into a session variable and store it into your table. -
on a particular website that has sub domains I have multiple accounts with the same name but different password. Firefox seems only able to save one of them, because they are on the same site.
"Things"? What things? Apps for keeping track of when to change cat litter? 30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant? Videos on the best way to make Christmas cake?
-
Hi my MacBook won't start up using guest user and can't get back to my log in
Hi guest user is just buffering and will not cancel
No, you marked you as the star.
Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7. -
Db link - invalid username/password error
hi
i created a connected user public db link, when i try to use it i get error message invalid username/password
here is my set up:
tnsnames.ora
--remote db
DWHTEST=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dwhtest.be)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bise1db)
---local db
BISE1DBLOCAL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = mydb.local)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bise1db)
i used the following query to create a link:
logged on in local db as sys as sysdba
CREATE PUBLIC DATABASE LINK dwhtest
CONNECT TO CURRENT_USER
USING 'DWHTEST';
link gets created;
the remote db has been cloned, so locally i have the identical db; all users /passwords are the same (was not even changing that, but they got updated with the remote users/passwords)
i connect to a user in local db, which also exist in remote db:
when i try to do select from remote db
select * from all_views@dwhtest
i receive error message: invalid username/password
i can create connections to this user both locally and remotely via sql developer using the same username/password, just a different tns name;
what am i missing that this is not working?
thanks in advance for any tips
rgdshi
thank you for your answer;
what you suggest is fixing the password for the current user; however via this public link i want to connect to 2 different users in a remote db; passwords for these 2 users are different (and i cannot change that, as this is in remote db like that)
so i dont think i can follow your tip (which password would i be entering)
as temporary fix i created fixed links for 2 users that i need to connect to in remote db and it works fine;
however id like to make the global link for a 'current user' work; so that i could use 2 links, not 4 links (in fact i have 2 remote db, qas and prod, and each time 2 users i need to connect to remotely, all from my local dev db);
thanks
rgds
Edited by: UserMB on Aug 17, 2011 1:02 AM -
Hello,
I installed RHEL 4 through a virtual machine on my computer. I created 2 users Root and System. The problem is i forgot my Root password and logging thru system and i dont have administrator rights for doing anything. can any one help get my root passsword.
Thanks in advance,
shushanthuser12941025 wrote:
Hello,
I installed RHEL 4 through a virtual machine on my computer. I created 2 users Root and System. The problem is i forgot my Root password and logging thru system and i dont have administrator rights for doing anything. can any one help get my root passsword.
Thanks in advance,
shushanthAnd what this has to do with an Oracle database forum? Anyways, let google be your friend,
http://www.google.co.in/search?q=how+to+break+root+password+in+linux&rls=com.microsoft:en-US:{referrer:source?}&ie=UTF-8&oe=UTF-8&sourceid=ie7&rlz=1I7GGLJ&redir_esc=&ei=3xy6S4zsL4Sy0gT87-zFCw&esrch=FT1
HTH
Aman....
Maybe you are looking for
-
Hi just bought my first Imac computer and i love it i am a 63 year old so getting used to it is not the same as windows but i can lear. My question is i have a codak printer less than one yeat old but it will not install to my Mac, no drivers i am to
-
Opening new web page using servlet and jasper report. ?
Hello, I am developing one small web application and implementing jasper report in it. I am using jasper report with servlet. Which is generating one pdf file and displaying in same browser. But I want to open this report in new browser. Which is onl
-
I have windows 8.1 on DVD & on USB CF Reader/Card. I've followed the full steps in bootcamp, but when it restarts and its time to select the bootcamp partition to install windows (after alt rebooting to the efi startup) I get the "Windows can't be in
-
10.7 Lion Spotlight doesn't search for dollar sign ($) anymore?
Ok, I just upgraded my work laptop to Lion 10.7.2 and I'm having serious issues with spotlight and finder. It seems you can no longer use the dollar sign ($) as a search operator?!?! I'm a Fujitsu ScanSnap scanner user and have very few paper docume
-
Conversion error removes entered values in the form
I have like 10 blocks of data in my jsf page. In my 7th block my date field gives a conversion error, then some of the fields entered above 7th block are removed and some of them after 7th block. why this happens??