I formatted the Store TV and cannot use it now
Hello, I have formatted my Store TV and now i am unable to use it anymore.
Could anyone help me with my problem?
Hi
A fried of mine has had the same multimedia HDD.
I dont know if this will help you but here is the Store TV default content which you can find on the HDD by default.
[Store TV default content|http://www.myupload.dk/showfile/1e1L70Daq.7z]
Maybe it helps you if you would copy the all the folders to the HDD.
Lets try.
Similar Messages
-
CS5 Panels acting bizarrely - unable rearrange the dock panels and cannot use the drop down menus
The panels are not functioning properly in my new version of CS5. Several things are wrong:
I cannot click a panel tab and move it. When I click on a panel, nothing happens. I tried moving the swatch panel to the bottom of the dock and I got nothing. I tried Command Click and I was able to move the swatch panel off the dock, but when i tried to re-dock it at the bottom of the panels, it would not dock in.
Also, when I try click on the menus in the panels in the dock, nothing happens. I have to click multiple times....and then the drop down menu just appears for a milisecond and then disappears....so I am not able to select anything.
Oh...and I am working in 32 bit.
Anyone have a clue what to do?Sounds like your problem is solved.
If you look at Alien skin's website regarding CS5 (http://support.alienskin.com/Article_BB9D5.aspx), then you'll see that they state that their plug-ins are CS5 compatible, so maybe you have an old version, or maybe you want to let them know about this issue. -
I have tried network resetting, I have even done a reset of my phone and back up. Nothing seems to work. Any ideas?
Make an appointment at any Apple store.
-
Upgraded to WRT160n and cannot use network now.
I replaced a BEFSR41 router with a WRT160N and now my wired computers cannot talk to each other. Tech support is telling me this is a Microsoft problem. If I connect the BEFSR41 back up instead of the WRT160n, the network comes back. All computers can access the internet though. I'm puzzled. What can I do to get the network to work?
Check the light status on wireless router ... also check the Ip on the wired computer .... if getting valid one try access the setup page & configture the router ...
Let me know the exact erro you are getting ... -
Just loaded IOS 8.1.3 and cannot use iMessage now, help!
i Just loaded the last IOS 8.1.3. It has messed up my iMessages. I am not able to set up despite tries over 2 days. Can any one help? Apple support has expired.
TThere are several posts like your own here. Check for them by viewing older or doing a search. I'm not sure if there is a fix but I recall some talk of signing in with their cloud id may have helped. Good luck.
-
I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!
Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams -
On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.I did everything it said to do inarticle HT1923 Removing and reinstalling iTunes, Quick Time, and other sofware components for Windows Vista or Windows 7. Now what?
Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 2010 and I have since misplaced the disk.
How do I fix the problem?Hi Ali,
You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
and reinstall the software.
Regards,
Rave -
My iPhone 4 has been recently stolen :( and I am wondering how can I be able to blocked my iPhone 4 so the one steal it cannot use my phone pls let me know what to do thanks.
Apple does not get involved with lost or stolen items. A carrier may offer IMEI blocking (non in the USA currently do, but elsewhere some do). Your carrier would already know your IMEI number anyway, so just contact them and ask them about it.
It is VERY good that you had a passcode lock on the device. That means your personal information will be safe. And yes, after 10 failed attempts (each with increasing time out between allowing another attempt) the device will permanently lock them out until they restore the device in iTunes. Anyone can go ahead and restore your iPhone as new in iTunes, but that also wipes everything off it and restores it to new condition - which does mean they can go off and use it as theirs, but at least all your data is gone.
Did you file a police report it was stolen? Also your carrier should be told (and ask them about IMEI blocking). Sorry it is gone, but you did the best thing possible to protect yourself and your information when you set up that passcode lock. -
I won Lightroom 1.0 as a door prize a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?
Thanks for replying, Jim. I wasn't planning to use it for raw images. I shoot film, black and white, and have many negatives I want to print. I am unfamiliar with the upgrades in Lightroom. I wasn't unhappy with the version I have. It was useful for my purposes.
Because it was a few years ago, I don't remember if I registered the product. I was able to login to my account. But could not find a path to communicate with Adobe. I will keep trying.
Ken -
I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?
Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis -
I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture. I cannot get it to project my school work that I need to teach my students. Help!
Hi Becki514,
Welcome to the Support Communities!
The following articles may help you with your projector issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
I hope this information helps ....
Have a great day!
- Judy -
I have photoshop lightroom 5, however, i have a mac air, and cannot use the cd to download it. Where can I find a link to the right download, as i think it is different then the creative suite version.
Thanks!Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1
-
I have been using Itunes on my HP laptop for 12 months and over the past month have not been able to access the Itunes store or any of the Itunes Help type menu's. When in Itunes I click on the Store icon and the top middle box gets to Half way. Pls help
I had the same tried loads of fixes
saw this on the community from whatheck
In windows 7 click on your start menu, go to the accessories, right click on the command icon and choose "run as administrator"
Once it opens type the following command...
netsh winsock reset
Hit enter and it should say something like winsock reset successful now reboot your computer
IT WORKED....... cleared all the "action2 on the CPU and loads IStore perfectly
Maybe you are looking for
-
Restoring an iWeb site to my Mac
Hello all, I have just had to re-install OSX to my iMac. Bare metal restore. In the process, I did not have a proper backup of my website created with iWeb. The site was published to both .MAC and to my proper domain name site. I need to be able to u
-
How to populate default values in standard transactions
Hi abapers, what r the different ways to populate fields with default values while entering into standard transactions thanks in advance.
-
JInternalFrame - how to add an editor pane to it
hello i have created a internalframe by using JDesktopPane. And i want to display some external file in that internal frame(JInternalFrame) through the editor pane. But i couldnt get it. help me
-
Instructions or manual for stand installation?
Can anyone provide me an Apple document/manual that has all the steps to install the eMac stand? I recently lost the one that came with the stand. I looked at the eMac Stand Installation Manual Apple provided on their support page but the manual does
-
Drag on map to collect all coordinates
Hi, As far as I know and after looking at the mapviewer library, I feel that there is no way to attach mouse drag event with mapview. Please correct me if I'm wrong and let me know if there is a way in updated version of mapviewer to attach mouse dra