I found a bug in IOS
Where can I report it?
I assume I'm not the first one, so where can I check any further details? Maybe it's not even a bug
It's delated with BVI - Bridge-Group Virtual Interface. It won't come UP, unless you type
"R1(config)#interface bvi 1 ?"
That question mark at the end is the key that will enable BVI interface. You don't need to press enter. It took me a few days to figure it out...
Regards,
Ziga
I noticed another bug in IOS. This time on static DHCP settings. You need to have default-router entry otherwise it doesn't work.
Here's sample config:
ip dhcp pool STATIC
host 10.10.10.10 255.255.255.240
client-identifier 0122.5b27.1f62.aa
default-router 10.10.10.1
Thisway is working, but without last command - it's not working.
"show ip dhcp bindings" is properly showing that static entry exists, but router doesn't assign desired IP. I'm using universal IOS v15 on cisco 800 series.
Regards,
Ziga
Similar Messages
-
I found a bug in iOS 4.3.3 - Long voice memos
Hello,
i found a bug in iOS 4.3.3 for my iPhone 3GS
Long voice memos can not be played
In these cases, the iPhone saves the file not in the format M4A or can not open this file.
This file is stored in the folder /var/mobile/Media/Recordings
In This cases there can be find a file in the format MOV.
During recording, the voice memo has the format MOV.
When the voice memo stopped the file must be stored in the format M4A.
For large files, there are currently problems.
I use the program iPhone Explorer and save the MOV-file on my computer.
Now i can open it with QuickTime.
Best regards from Germany!
RuedigerApple Feedback
-
I've found two bugs in iOS 7:
1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback -
Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.
Please report via Apple Feedback. These are user forums. You aren't speaking to Apple here.
-
I Have found a bug in iOS 7.1 on iPhone 4S, what shoud I Do ? (i'm french)
Use the contact us link at the bottom of the page and tell Apple.
-
Found a bug on ios 7.0.2 with lock and home screen
I have found a bug concerning the lock screen when you open the iphone and you push the screen to the rightt (sorry in french and dong know how to explain correctly)and at the moment you se the lck screen desapear you "take back" the lock screen page by pushing tp the left and then you will have the home page wallpaper on lock screen ( wont work if you have a passcode) and you can't have your default lock screen by putting the phone on sleep mode ... It just not coming back .. You hve to put the iphone on sleep mode without toucching the screen to have your default wallpaper back on lock screen.. (Works on any iphone )
I have another problem to with my batery since ios 7 update my battery goes 100-0% in like 5h .. And i just exchange my iphone because my power button was stuck and i dont have any garanty and its does that for all my friend with iphone 4s running ios 7.0.2
Wish apple could fix those 2 bugs or if anyone as any solution for me pleAse tell me
Thank you.Apple Feedback
-
Well now iOS 7 was released officially and I can write about the bug. First I want to clarify... in the final version iOS is no change compared to the GM?
Sorry for my English. Translate using Google.Apple Feedback
-
How do I let Apple know that i found a bug in IOS 7 so they can fix it?
I set my phone to only ask for the password a minute after locking it, and no matter what I do to it, I always get asked for the password right after locking. I just wanted to bring this to Apple's attention.
http://www.apple.com/feedback/iphone.html
Or
https://bugreport.apple.com (Don't know if you'll be able to access this one....) -
I found a bug, how can I pass it on to apple engineers to help them fix it
I recall hearing (in another post, maybe yesterday) of a multitasking bug that Apple engineers were asking a user to test...I'll see if I can find it.
EDIT: Starting at the bottom on page 2 (how to test) and continuing with more details for testing on page 3 https://discussions.apple.com/message/23666433#23666433 -
Code Translation Bug in iOS release build
Hello,
I think I found a bug in the Adobe compiler to build an iOS ipa. It only happens on ipa release builds, not interpreter builds and I have tried it with several Adobe Air SDKs (from 3.6 to 3.9).
This function:
protected function isCardValid(player:Player, card:Card):Boolean
if (trick.length == 0) return true;
else if (cardsMatch(trick[0], card)) return true;
var validCardLeft:Boolean = false;
for (var i:uint = 0; i < player.hand.cards.length; ++i)
if (cardsMatch(trick[0], player.hand.cards[i]))
validCardLeft = true;
break;
return !validCardLeft;
Will return true on ipa-app-store, no matter the value of validCardLeft. I have verified with popups, that the value of validCardLeft contains the correct value, nevertheless the function always returns true. It happened in 2 of my games, that use this function but a different implementation for cardsMatch();
Using the ugly
if (validCardLeft) return false;
else return true;
fixes the problem.Ran into a similar issue on AIR 4.0 while using "-swf-version=21" as an additional compiler option.
Assigning a boolean variable the value "false" and checking it in an if statement always evaluates as "true" on iOS ad hoc builds.
Changing the if statement to check "true" instead and using an else to handle the appropriate logic seems to have fixed the issue. -
Hi!!! I`m website developer. Look likes i found system bug. It doesnt meter what kind of brouser you are use. When the alignment of the document to the right, the location calculation fails when scaling fixed elements of the page. This is preset on all devices from ios 6-7. So anyone else encountered this problem that occurs, how to fix this bug system.This occurs when the spelling from right to left since the position of all the elements tied to the right edge.
Anton
Message was edited by: simbarakaSend feedback/suggestions to Apple.
http://www.apple.com/feedback/ipad.html
Cheers, Tom -
Dear Sir or Madam,
I found a bug on the calender app of iOS 8 regarding the all-day event bug. I'm apologize for my bad english but i try to explain the bug.
1) Open the calendar app
2) Push on '+' to create a new event
3) Push on 'starts' and set e.g. 15 March 2015
4) Push on 'all-day', (turn 'all day' on)
5) Now you have to see/ now it shows: starts: 15 March 2015 and ends: 15 March 2015
6) Set a name and push 'done'
What you expect now is that you create an event which starts on the 15 March 2015 and ends on the 15 March 2015.
But in reality your iphone creates an event for 14 Match 2015 untill 15 March 2015. -
Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down instead of returning to video playlist.
Restarting videos works and looks like video is getting deleted.
Just a bug reportYou might want to report that to Apple instead of to the other users in this forum.
http://www.apple.com/feedback/iphone.html -
Hi everyone,
I think I've found a bug. I suppose I would like to see if others can reproduce it - I've managed to on 2 work machines, but the more the merrier. I suppose I'm also hoping that giving this bug more exposure will increase the likelihood of it getting resolved. I can dream
The bug shows itself when exporting an InDesign document (or book) to "Digital Editions", or as an EPUB file. The InDesign source needs to have a Table of Contents, and this TOC has to be used by the EPUB to create TOC entries (see the "contents" tab of the export window). In certain cases, using the InDesign TOC causes the EPUB export to garble certain characters; unicode-specific characters, in my experience.
Steps to reproduce:
Create a new document, add a blank text frame and fill it with placeholder text. add a heading to this text frame, styled appropriately.
Create a table of contents, using the heading style you defined and used previously.
Add some unicode characters to the end of your text frame. I've been using "bêche-de-mer — a genus", which has 2 unicode characters. My tests have shown about 1715 characters in the text frame is enough to trigger this bug.
Save the document and export to digital editions. under the "contents" tab, check the "include indesign TOC entries" option.
Open the EPUB (or unzip it and view the xhtml content). I would expect to see "bêche-de-mer — a genus" at the end. However, I see something more like "b√™che-de-mer ‚Äî a genus" instead. I do see the correct output if I don't check the "include indesign TOC entries" option when exporting to EPUB.
I've confirmed the fonts I've tried are unicode-compliant and have the relevant character codes. I'm running the latest update to InDesign CS4 (6.0.4) on OSX 10.4.11. This character encoding problem doesn't manifest itself in the PDF or IDML export, only the EPUB export. Choosing whether or not to include embedded fonts in the EPUB doesn't make a difference to the outcome. I have run this test on my machine and a workmates, which is OSX 10.5.[something]
I'll attach a test document to see if others can reproduce this bug. I'd be interested to hear if others can, or cannot reproduce it. I have submitted a bug report at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform, but that doesn't exactly imbue me with confidence that anything will get done in a hurry...
This problem is pretty annoying; I can either have EPUB navigation, or uncorrupt text. My current (proposed) workaround is for the operator to create 2 EPUBs, one with a TOC and one without, and merge the two together... EPUB transplant if you will. A bit ugly....
thanks for listening!Hiya Joe (and Archie)
It is indeed an annoying bug - I spent a few days looking around it before posting (wow, it must be nearly a year ago now).
Fortunately, it really is straightforward (if a bit of a hassle) to workaround:
- make 2 EPUBs, identical except one will have a TOC generated (epub-a), the other will not (epub-b)
- extract the TOC file from epub-a and insert it into epub-b
remembering that EPUB is a zip package, this is very easy indeed. On OSX you have /usr/bin/zip and /usr/bin/unzip to assist with extraction / insertion in a script (bash, applescript, etc). I don't think Windows comes with command-line zip programs, so you'd need to hunt around a bit.
Good luck. I don't know if this is resolved in the latest 6.0.5 patch - if you haven't updated to that, it might be worth a shot. And if you have and it's still a problem, please respond to this message just so there's a log stating as much.
Steve -
If you think you've found a bug in Photoshop CS6, please post your findings here on the forums.
Here is a list of the information we'll want for you to gather at a minimum:
Clear and concise steps so that someone who isn't in front of your comptuer can reproduce the issue you are seeing
Include information on the operating system/version you are running. (e.g. "Mac OS 10.7.3" or "Win XP Service Pack 3")
Here are some more detailed instructions for writing a useful, complete bug report for us on the forums:
Provide a descriptive title that includes your OS information:Example: "Photoshop crashes when I save a JPEG file using the File>Save For Web & Devices... command (Mac OS 10.7.3)"
Provide concise, step-by-step details on how to reproduce the issue you are seeing.
Example:
Open an 8-bit, RGB image by selecting File>Open...
Create a new layer by clicking the "Create New Layer" button on the bottom of the Layers panel
Paint on the layer created in Step #2 using the default Brush tool
Choose File>Save For Web & Devices...
Make sure the optimized format is set to "JPEG" and set the Quality setting to "80"
Click the Save button at the bottom of the Save For Web & Devices dialog, choose the desktop as the location for saving the file
Provide a description of the "Result" you are observing:
Example: "Result: Photoshop crashes"
If there is an error dialog, please include the exact wording displayed in the dialog or provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
If the error is a visual defect, either in the user interface or the image itself, provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
Provide a description of the "Expected Result":
Example: "Expected Result: Photoshop to save JPEG file to the desktop, no crash"
In some cases this may be obvious (such as in the case of a crash) but in others, what you expect to happen may be different than what the application was designed to do. Please be as specific as possible.
Provide the crash log by submitting all crash reports, including your email address, for every single crash your encounter:
You may also include the contents of your crash log in your forum posts as well, but always submit them using the above instructions as well.
Crash logs are located on Macintosh here: Users/<your user name>/Library/Logs/CrashReporter
Provide your System Info from Photoshop: What's even more useful is if you can share your System Info from Photoshop as it contains all kinds of useful information (OS/version, graphics card, driver version, 3rd party plug-ins used, etc) that will help the team track down your issue.
On occasion, the Photoshop engineers may request that you provide problematic files in order to reproduce and debug your issue.
In these cases, please post the file somewhere using your own servers or one your favorite online document/distribution services and provide a URL/instructions to download the file:
Dropbox
Adobe SendNow
YouSendIt
If the file isn't something you can post publically, you can request that someone from the engineering team contact you to figure out a secure way to get the affected files.
Thanks,
The Photoshop Development TeamFirst thing would be to realise the exact error. Second would be to check your logs to see what you have installed/upgraded which might be causing this error. Third, google your error and see if matches turn up. Fourth, search in Arch bugtracker to see if a match exist. Else file a report.
Maybe you are looking for
-
Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on aud
-
Report category for this selection
u201CPeriodu201D selection dates: - Codes 1, 2, D, F, I, K u201CSelection Criteria: - Payroll Area - Person ID - Personnel Number (multiple selection) - Employment Status equal to 1 or 3 I want to have the above as part of my sel
-
SharePoint 2007 I.E. browser compatability
For WSS 3.0 (SharePoint 2007) what versions of IE are supported?
-
Which desktop environments allow different backgrounds for workspaces?
I've just installed a brand-new Arch linux - all lovely - and to try to save memory (as my laptop as only 512 Mb) I thought I'd use a smaller desktop environment than KDE, which I was using previously, with my old distribution. So I installed Xfce.
-
Hi , Static Object Creation : Eg: <mx:Fade id="ViewStack_EffectStart" duration="500" alphaFrom="0.0" alphaTo="1.0"/> <mx:Fade id="ViewStack_EffectEnd" duration="500" alphaFrom="1.0" alphaTo="0.0"/> <comp:ErrorBox id="errorBox" active="{active