I found a globalmenu for Mate

Well I was in search of a globalmenu for Mate DE. There was no globalmenu for mate until the time I found this link :-
http://forums.linuxmint.com/viewtopic.p … 7&t=114613
jasmineaura in above link has already forked compiz as compiz-mate & gnome2-globalmenu for mate by name mate-globalmenu. Its working for Linux mint I wonder if anyone can get it working for ARCH. I am newbie so I have no idea how to do it.
cheers!

Thank you and whoever you copied this from so so much. Having already sent back one new iPod shuffle because after randomly autofilling from my entire music collection depsite following all the troubleshooting tips it just wouldn't let me do anything else, so I conclude it was broken! I then went out and got another new one from a different source only to find I had exactly the same problem. Ok that's too spooky for it to be a hardware problem, but having wasted two evenings of my life trying to sort it out I thankfully came across this post which works!:-) You are my saviour! Come on Apple put a fix out there for this or at least acknowledge there is a problem - otherwise I'm sure you'll end up loosing sales!

Similar Messages

Need FirmWare for MAT****A BD-CMB UJ141ES

Can you please help me find the latest firmware for MAT****A BD-CMB UJ141ES?
Thank you in advance

>I've checked Toshiba doesn't prove drivers for DVD/BD
Well, in such case such firmware isnt provided by Toshiba.
I guess you issues has nothing to do with the firmware version but probably its simply hardware problem.
It could be also a software issue caused due to different preinstalled Disk burning software.
Additionally I found another thread you have posted here in the forum about this issue.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74904
Please note that double and cross posts are not allowed. This makes discussions difficult to follow and leads to misunderstandings. So follow one thread!

KEU5 – It does not found senders (emisor) for segment.

Dear Expert Sap
Please, I try to explain the following scenary :
I had created one purcharse using ME21N transaction, that it had one service and imputation on cost center (CeCo)
I had created document using ML81N and accepting.
I can lookup posting document FI and it is correct.
I can lookup posting document profit center cost
But it did not create posting on COPA. Because It did not have configuration or specified OKB9: Cost Ctr (KSTAR) assigned - > Cost element master (KOSTL).
When I am excuting this report S_ALR_87013611 - Cost Centers: Actual/Plan/Variance.
I are seing income as statistical posting under cost centres.
Cost centres cannot have 'real' income postings. It is correct.
Because Cost Ele category is equal “12” and (Cost Ele category 11 or 12) are posted AS statistical on cost centers.
Finally:
Bussines need that "posted as statistical on cost centers" => it should create on COPA.
We are thinking that we can using a cycle in KEU5 transacction.
But whem we are executing transaction KEU5 son it get this message:
– It does not found senders (emisor) for segment.
Unfortunately, I am not found one note oss.
Could you check this and recommend the best option? or could you recommend any note oss, please?
All your recomendations will be welcome.
Thanks a lot for your recomendation and help.
Best regards,
Gustavo Hermoza

Thank you very much for your answer, Ronghua!!!
I am thinking about your recomendation about using substitucion (OKC9) to derivate the PAOBJNR as reael account assignment.
It will probably be good idea but Step(Okc9) does not derivate or move characteristics to RKE_GET_ACCTNR Function. Because we dont not know this characteristics.
We had reviwed cost line items for cost center and we are seeing that all document are Material Document and this document dont have fields to derivate characteristics.
Another alternative:
Transaction KA02 change category element.
Field change CElem Category is not possible (transaction data already exists)
Diagnosis
To ensure the consistency of existing data, you can only change object CElem Category if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
As transaction data already exists, it is not possible to change objects in this time period.
Procedure
If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".
I want to show this post it is good.
Profitability segment - ERP SD - SCN Wiki
Thanks a lot for your recomendation and help.
Best regards,
Gustavo Hermoza

Found 0 results for When I open Firefox I get a "Well this is embarrassing" message. Makes no difference if I click on "Start a new session" or "Restore", it crashes. Then I get a "crash report" which apparently goes nowhere. I have uninstalled and reinst

Found 0 results for When I open Firefox I get a "Well this is embarrassing" message. Makes no difference if I click on "Start a new session" or "Restore", it crashes. Then I get a "crash report" which apparently goes nowhere. I have uninstalled and reinstalled twice with the same result, what do I do to restore Firefox?
== This happened ==
Every time Firefox opened
== Last week when I opened Firefox.

The crash reporter doesn't appear to be working...Here are the details that were contained in the report:
Add-ons: {0538E3E3-7E9B-4d49-8831-A227C80A7AD3}:0.9.10.2, :3.63,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.3
BuildID: 20100401064631
Comments: I get an error message, " well, this is embarrassing"..and Firefox crashes
CrashTime: 1274739017
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0dea000
FramePoisonSize: 4096
InstallTime: 1270304892
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 2699
StartupTime: 1274738966
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.3
This report also contains technical information about the state of the application when it crashed.

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

Goods Issue after STO warning "Price change of % in month / for mater"

Dear all,
This is my process for Inter-co plant stock transfer:
1. Create STO via ME21N
2. Raise Goods Issue from source plant via MIGO_GI
3. I get this warning message "Price change of % in month / for mater", details as below:
Price change of % in month / for material
Message no. M7306
Due to action taken the quantity and value of the material are changed. This leads to calculation of a new moving average price: The new price deviates from the old one by .
Procedure
Before you carry out the posting, you should determine the reason for this difference.
You could check the material line items to find out which postings have led to the current moving average price. If the action taken refers to a purchase order, you could contact Purchasing to find out whether a mistake was made when entering the order price.
Has anyone seen this before and what should be the cause of action? Well, I was still able to proceed with the GI successfully but I'd like to know what has caused the message?
Thanks.
Steven

Hi Manohar,
My previous stock was 0.
So i received material 100 qty at 20 INR.
Total stock value = 2000
Now as per you:
2000 / ( 0 *6) * 100 = 33.33
I am not getting 390,17 %
Utsav

Message no. VL295 (Dlv. type (dlv. catgry LB for mat. & and BWART 541)

When attempting to do a transfer posting (MB1B or MIG_TR) from unrestricted stock to SC vendor stock the following error message is displayed "Dlv. type (dlv. catgry LB for mat. 85 and BWART 541) cannot be determined".
I checked all the configuration settings; could someone list the configuration and data steps involved to get this process working?
Thank you

Hi,
I am also facing the same error. Can you please let me know what the solution is?
Regards,
Ravi Davda

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for usi

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
== This happened ==
Every time Firefox opened
== I just noticed it. It probably happened when I upgraded foxfire.

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?

It shouldn't print each page as a separate job and
each tab has a different name, so, even if it did, it
ought to give the printouts the name of the tabs.
It doesn't print each page as a separate job unless the orientation is different - that's the bug. And the name of the job is taken from the name of the window, not the name of the tabs. That's how every application works, which, I think, is why Excel allows the specific selection or the active sheets to be printed.
Still, that does sound like a plausible explanation.
However, even if presented with multiple prints with
the same name, the spooler should print each one!
The spooler does print each one - you can watch the spooler process the multiple jobs. I think, though, that they are being overwritten since all the jobs have the name of the window as the job title. And since this happens after the Save Dialog is presented, there's really nothing the application can do. To Excel, it's one job, the multiple orientations don't matter; it's just that Apple doesn't handle it correctly.
As a workaround, you can print the selections one at a time and give them unique names and then rejoin them in one PDF file.

Oracle OSM: MetadataException: There is no entity found in document for...

Some fields was addicted to dictionary and when I deploy the cartridge, the following exception appear. Anyone can help me!
com.mslv.oms.metadatahandler.operation.MetadataException: There is no entity found in document for: element matching the key Tipo_Ordem not found; error code: 108
at com.mslv.oms.metadatahandler.operation.ImportOperation.handleSequenceException(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.processEntity(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.processEntity(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.processEntity(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.doProcess(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.deploy(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.c(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.a(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
<02/01/2013 10h06min27s BRST> <Error> <oms> <BEA-000000> <cartridgemgmt.DeployCartridgeMDB: Cartridge deployment failed:
com.mslv.oms.metadatahandler.operation.MetadataException: There is no entity found in document for: element matching the key Tipo_Ordem not found; error code: 108
at com.mslv.oms.metadatahandler.operation.ImportOperation.handleSequenceException(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.processEntity(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.processEntity(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.processEntity(Unknown Source)
at com.mslv.oms.metadatahandler.operation.ImportOperation.doProcess(Unknown Source)

This indicates OSM has detected a problem with the consistency of the cartridge that is being deployed. Likely this means that Design Studio itself had a problem building the cartridge that went undetected until the cartridge was deployed.
I would suggest you try the following:
1. Shutdown and restart Design Studio.
2. Do a clean-build of your cartridge.
3. Redeploy the cartridge.
If you are redeploying your cartridge over an existing cartridge version, then try changing the cartridge version number, follow steps 1-3 above and see if that makes any difference.
If the above doesn't resolve your problem, then suggest you contact Oracle Support.
Regards,
Brian.

Getting error:Absence type 100 was not found in Customizing for

Hi,
I am using the Standard workfllow for leave application, and when i am creating the request i am getting the bleow error:
'Absence type 100 was not found in Customizing for 21.10.2010'
What could be the reason, i have configured the statndard setting for leave type 100 in SPRO.
Thanks,
Krish.

Hi Kishore,
Please check the validity period for Absence type 100 configuration.
Also pass this Error message to your HR Functional consultant. It is the configuration issue and your FM have to take care of this issue.
Thanks.

Java.rmi.UnmarshalException: skeleton class not found but required for clie

Hello everyone,
I am new to RMI and getting a strange exception. I am using Java 1.5.0_07 both on client and server. They are running on the same machine, the rmi registry is started inside the server application.
I am wondering why java complains about skeletons, I thought they are automatically created when using java 5.0?
Please have a look at the stacktrace below.
Thank you for your help.
Best Regards
Patric
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
     java.rmi.UnmarshalException: error unmarshalling call header; nested exception is:
     java.rmi.UnmarshalException: skeleton class not found but required for client version
     sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:325)
     sun.rmi.transport.Transport$1.run(Transport.java:153)
     java.security.AccessController.doPrivileged(Native Method)
     sun.rmi.transport.Transport.serviceCall(Transport.java:149)
     sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
     sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
     java.lang.Thread.run(Thread.java:595)
     sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
     sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
     sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
     sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     java.rmi.Naming.lookup(Naming.java:84)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:58)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

The full class path information that I can gather is as follows (some of the library path locations could be suspect...):
Class path: /edge/node3/hotfix::/edge/node3/current/lib/JMdsApi.jar:/edge/node3/current/lib/MemoryProfilingAgent.jar:/edge/node3/current/lib/T2common-2.6.0-SNAPSHOT.3200.jar:/edge/node3/current/lib/T2scripting-jython.jar:/edge/node3/current/lib/activation.jar:/edge/node3/current/lib/alib.jar:/edge/node3/current/lib/alibom.jar:/edge/node3/current/lib/ant.jar:/edge/node3/current/lib/authapi.jar:/edge/node3/current/lib/bbdlapi.jar:/edge/node3/current/lib/bcpg-jdk15-136.jar:/edge/node3/current/lib/bcprov-jdk15-136.jar:/edge/node3/current/lib/c3p0-0.9.1.2.jar:/edge/node3/current/lib/castor-1.1-codegen-anttask.jar:/edge/node3/current/lib/castor-1.1-codegen.jar:/edge/node3/current/lib/castor-1.1-xml.jar:/edge/node3/current/lib/castor-1.1.jar:/edge/node3/current/lib/colt-1.2.0.jar:/edge/node3/current/lib/common-annotations.jar:/edge/node3/current/lib/commons-beanutils.jar:/edge/node3/current/lib/commons-codec-1.3.jar:/edge/node3/current/lib/commons-collections-3.2.1.jar:/edge/node3/current/lib/commons-jexl-1.1.jar:/edge/node3/current/lib/commons-lang-2.3.jar:/edge/node3/current/lib/commons-logging-1.1.1.jar:/edge/node3/current/lib/commons-net-1.4.1.jar:/edge/node3/current/lib/dsn.jar:/edge/node3/current/lib/eagleapi.jar:/edge/node3/current/lib/ezmorph-1.0.3.jar:/edge/node3/current/lib/f2-loader-1.8.jar:/edge/node3/current/lib/fasttrade-boviewer-1.0.1.jar:/edge/node3/current/lib/hsqldb.jar:/edge/node3/current/lib/icu4j-3.4.4.jar:/edge/node3/current/lib/ivy.jar:/edge/node3/current/lib/janino.jar:/edge/node3/current/lib/janus-sdk-1.7.0.0.jar:/edge/node3/current/lib/jasypt-1.4.1.jar:/edge/node3/current/lib/javolution.jar:/edge/node3/current/lib/jcalendar-1.3.2.jar:/edge/node3/current/lib/jcl-over-slf4j-1.5.6.jar:/edge/node3/current/lib/jcommon-1.0.9.jar:/edge/node3/current/lib/jconn2.jar:/edge/node3/current/lib/jconn3-6.05-b26214.jar:/edge/node3/current/lib/jdom.jar:/edge/node3/current/lib/jfreechart-1.0.5.jar:/edge/node3/current/lib/jgroups-all.jar:/edge/node3/current/lib/jline.jar:/edge/node3/current/lib/jmkv123p1.jar:/edge/node3/current/lib/jna.jar:/edge/node3/current/lib/joda-time-1.5.2.jar:/edge/node3/current/lib/jscience.jar:/edge/node3/current/lib/json-lib-2.2.1-jdk15.jar:/edge/node3/current/lib/jul-to-slf4j-1.5.6.jar:/edge/node3/current/lib/junit.jar:/edge/node3/current/lib/jython.jar:/edge/node3/current/lib/log4j-1.2.15.jar:/edge/node3/current/lib/log4j-over-slf4j-1.5.6.jar:/edge/node3/current/lib/loggablePreparedStatement-1.6.jar:/edge/node3/current/lib/looks-2.1.4.jar:/edge/node3/current/lib/mailapi.jar:/edge/node3/current/lib/model-12021.jar:/edge/node3/current/lib/mysql-connector-java-5.1.7-bin.jar:/edge/node3/current/lib/opencsv-1.8.jar:/edge/node3/current/lib/rfa.jar:/edge/node3/current/lib/rspcore.jar:/edge/node3/current/lib/slf4j-api-1.5.6.jar:/edge/node3/current/lib/slf4j-log4j12-1.5.6.jar:/edge/node3/current/lib/smtp.jar:/edge/node3/current/lib/smtphandler-0.6.jar:/edge/node3/current/lib/spring-2.5.2.jar:/edge/node3/current/lib/statsvn.jar:/edge/node3/current/lib/swingx-0.9.3.jar:/edge/node3/current/lib/t2-12021.jar:/edge/node3/current/lib/testng-5.9-jdk15.jar:/edge/node3/current/lib/tibmsg.jar:/edge/node3/current/lib/tibrvj.jar:/edge/node3/current/lib/trove.jar:/edge/node3/current/lib/velocity-tools.jar:/edge/node3/current/lib/velocity.jar:/edge/node3/current/lib/xalan.jar:/edge/node3/current/lib/xerces.jar:/edge/node3/current/lib/patng/activeio-core-3.0.0-incubator.jar:/edge/node3/current/lib/patng/activemq-core-4.1.1.jar:/edge/node3/current/lib/patng/avalon-framework-4.1.3.jar:/edge/node3/current/lib/patng/backport-util-concurrent-2.2.jar:/edge/node3/current/lib/patng/binding-1.4.0.jar:/edge/node3/current/lib/patng/cglib-nodep-2.1_3.jar:/edge/node3/current/lib/patng/common-1.30.jar:/edge/node3/current/lib/patng/commons-cli-1.0.jar:/edge/node3/current/lib/patng/commons-configuration-1.2.jar:/edge/node3/current/lib/patng/commons-discovery-0.2.jar:/edge/node3/current/lib/patng/commons-math-1.1.jar:/edge/node3/current/lib/patng/concurrent-1.3.4.jar:/edge/node3/current/lib/patng/geronimo-j2ee-management_1.0_spec-1.0.jar:/edge/node3/current/lib/patng/geronimo-jms_1.1_spec-1.0.jar:/edge/node3/current/lib/patng/logkit-1.0.1.jar:/edge/node3/current/lib/patng/mina-core-1.0.1.jar:/edge/node3/current/lib/patng/mina-filter-ssl-1.0.1.jar:/edge/node3/current/lib/patng/mina-java5-1.0.1.jar:/edge/node3/current/lib/patng/mx4j-remote-3.0.1.jar:/edge/node3/current/lib/patng/mx4j-tools-3.0.1.jar:/edge/node3/current/lib/patng/org.apache.felix.framework-1.0.0.jar:/edge/node3/current/lib/patng/org.osgi.core-1.0.0.jar:/edge/node3/current/lib/patng/pat-dt-common-1.18.jar:/edge/node3/current/lib/patng/pat-sdt-1.18.jar:/edge/node3/current/lib/patng/patNg-api-1.27.1.jar:/edge/node3/current/lib/patng/patNg-server-aoc-1.21.jar:/edge/node3/current/lib/patng/patNg-server-common-1.21.jar:/edge/node3/current/lib/patng/patNg-server-session-manager-1.21.jar:/edge/node3/current/lib/patng/patNg-utils-1.27.1.jar:/edge/node3/current/lib/patng/qpid-broker-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-client-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-common-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-mina-core-2.2.2.0.jar:/edge/node3/current/lib/patng/rsee-2.11.jar:/edge/node3/current/lib/patng/servlet-api-2.3.jar:/edge/node3/current/lib/patng/silk-1.3.jar:/edge/node3/current/lib/patng/slf4j-api-1.4.0.jar:/edge/node3/current/lib/patng/slf4j-log4j12-1.4.0.jar:/edge/node3/current/lib/patng/validation-1.2.0.jar
Boot class path: /apps/jdk/1.6.0_13/linux/jre/lib/resources.jar:/apps/jdk/1.6.0_13/linux/jre/lib/rt.jar:/apps/jdk/1.6.0_13/linux/jre/lib/sunrsasign.jar:/apps/jdk/1.6.0_13/linux/jre/lib/jsse.jar:/apps/jdk/1.6.0_13/linux/jre/lib/jce.jar:/apps/jdk/1.6.0_13/linux/jre/lib/charsets.jar:/apps/jdk/1.6.0_13/linux/jre/classes:/tmp/yjp200811122006.jar
Library path: /apps/jdk/1.6.0_13/linux/jre/lib/i386/server:/apps/jdk/1.6.0_13/linux/jre/lib/i386:/apps/jdk/1.6.0_13/linux/jre/../lib/i386::/edge/node3/current/lib:/home/eqdev/eqedgeuat/yourkit_7_5_11/yjp-7.5.11/bin/linux-x86-32:/edge/node3/current/lib:/home/eqdev/eqedgeuat/yourkit_7_5_11/yjp-7.5.11/bin/linux-x86-32:/usr/java/packages/lib/i386:/lib:/usr/lib

PDF viewer for Mate that allows creating bookmarks?

I'm trying the Mate's document viewer Atril, but I can't see any way to make a bookmark so I can get back to a page while browsing a 1000+ page PDF. I know Okular can do it, but even with all the power in the world who wants to install all those extra KDE libs just for one app? Are there any options for Mate?
Last edited by trusktr (2012-04-25 10:16:24)

Hmmm... Yeah I saw Zathura and she looked nice (considering she likes only fingers)... I guess I'll have to try her out because having no bookmarks while browsing 1000 pages is probably a scenario worse than commanding Zathura.
Last edited by trusktr (2012-04-25 10:16:07)

Simple question .... how to add photos to the body of my EMAILS -Found 1000 results for How do I add photos to my emails for Thunderbird

Simple question - How do I add photos to the body of my emails . But instead of the answer - Found 1000 results for How do I add photos to my emails for Thunderbird. There are answers that don't apply at all to the question in anyway. Why does it have to be so hard to get a simple answer to a simple question?
Thunderbird is acting much like Microsoft, the every reason I dumping MS Live Mail.

First of all, much help for Thunderbird refers to menus which may not be visible. It would help you and us if you have your menus and toolbars visible.
http://chrisramsden.vfast.co.uk/13_Menus_in_Thunderbird.html
So, open a write window. Enable its menu and toolbar(s).
Now do you see an "Insert" option?
If not, you may be set to compose in plain text, which does not support embedded images.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|{select account}|Composition & Addressing''' and ensure "Compose messages in HTML format" is ticked. If it wasn't already ticked, go back to composing a message. Any better now?
Once you have HTML composition mode going, you can use '''Insert|Image''' or various permutations of copy-and-paste and drag-and-drop into your message body.
A manual, of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/

No entry found in it_accposnr for posnr 0000000734

Dear All,
While going for running assessment cycle through KSU5, we are getting dump as a part of runtime error. Below is the message getting as a part of Error :
No entry found in it_accposnr for posnr 0000000734
Pls let me know abount this error and corrective action to be taken.
Thanks in advance.
Thanks & Regards,
Taral Patel

Hi,
check SAPNET note 833916 and the related notes.
Best regards, Christian

I found a globalmenu for Mate

Similar Messages

Maybe you are looking for