I found a site with videos of the macbook !! :-) enjoy

its here :
http://youtube.com/watch?v=ABRFV9lGdOY&search=macbook
look around,

Good find!
Thanks for the videos.
You tube is the best.
Kalel

Similar Messages

Firefox freezes when i visit websites with videos on the background or i watch videos.I have windows 7 and the laatest version of mozilla.

I have windows 7 and the latest version of firefox.When i watch videos on youtube or visit websites with videos on the background mozilla freezes. I tried to disable all the extensions and plugins but it had no result.I didn't had this problem with versions of mozilla previous to 4.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Is there a procedure to open keynote 09 files with videos in the new Keynote without converting videos?

is there a procedure to open keynote 09 files with videos in the new Keynote without converting videos?
I have a big presentation with many video mov and avi files created with Keynote 09. When trying to open the file in the new Keynote the procedured crashes and Keynote crashes abruptly. It seens that an avi file is not converted. I have no more the old Keynote 09. How can this problem be solved?

if you right click or control click on the file, do you get an option to 'show package contents'?

Register APs at remote site with WLCs at the core via Metro E.

All,
I have problem with register APs at the remote site with WLCs at the core.
All of my WLCs are on main site; and the majority of APs are on same subnet and same site with the WLCs. This works just fine.
However I have a remote site with connected to the core via metro E. And I am unable to make the APs at this site register to the controllers at the core.
On remote site APs and PCs are on subnet. And PCs are work just fine. I have the DHCP scope options 43 set for the ip address of the WLCs.
Metro E interfaces are on 192.168.0.0 /24.
Clients (PCs and APs) at remote are on 192.168.56.0 /24
I have the configuration on the Metro E and and remote site on the attachment.
Thank in advantage.

To get APs registered, make sure AP is getting an ip address and can ping WLC
Once this is verified, run the following debugs on WLC CLI and attach it to the thread:
- debug mac addr
- debug capwap OR lwapp events enable
- debug capwap OR lwapp errors enable
- debug pm pki enable
To stop debug
- debug disable-all
In case you have 'console' access to remote site AP, capture AP boot up and then run "debug ip udp" on AP CLI
To stop this debug
AP# undebug all

What is wrong with OSX on the MacBook Pro and when will it be fixed?

When running Second Life or Worlds of Warcraft or just quick browing... anything graphically intensive on the MacBook Pro, the machine slows to a crawl, eventually completely freezes up. The cursor doesn't move, pressing the Caps Lock key does not change the Caps Lock light and the machine is no longer reachable from any other machine on the network. The only means available to recover is to hold the power button down until the Mac powers off and then restart it. This doesn't happen when running XP through boot camp and windows client versions of these programs. What is wrong with OSX on the MacBook Pro and when will it be fixed? Thanks.

I am not sure that this relevant to the discussion. But I am searching for anyone else who is seeing random freezes on 10.4. I usually don't see anything in the log after I have to do a hard reboot of the box. However, I have noticed some I/O messages when I have been able to console into an affected device, but have not captured to this point. Also, when I am able to console, the box will accept the login, but times out when trying to authenticate the password.
I am also seeing a server freeze on my G4s. I am able to reproduce the problem with a clean install from the 10.4 disk. The issue is reproducible with tcpdump, dumpcap as well as tshark. I have also tried compiling the tools with different versions of libpcap. I am able to reproduce this problem every time with a packet generator sending small packets.
It seems that the small packets aggravate the underlying cause. As the more small packets are sent the quicker I am able to reproduce the problem. With a mix of packet sizes, as seen in most networks, this issue is hard to reproduce. We have been using the G4 since 2003 as a packet analysis tool and it has been very stable up until we attempted to do analysis of a VOIP network with 10.4. The small RTP packets in conjunction with 10.4 seem to be the culprit.
So far I am not able to reproduce the freeze on a 10.2 or 10.3 image. This is not isolated to bad hardware, as I have been able to reproduce on 4 different Xserves in my labs with similar configurations.
I currently have a G4 set up in my lab and would be able to supply any info that may be needed to track down this issue. I have been thrust into administration on this box recently so I am not very familiar with debugging procedures on the Xserve or MacOS. However, I have the hardware and the test equipment that many in a production setting may not have at their disposal. So if anyone, with extensive knowledge of the Xserve or MacOS, is willing to work with me to track down this issue I am willing to do the leg work in the lab. I would appreciate any assistance that is available.

Migrated powerbook to new macbook air with mavericks and the macbook air is using much more storage

I migrated powerbook to new macbook air with mavericks and the macbook air is using much more storage than the powerbook.

I'm trying to figure out why the new macbook air takes almost twice as much storage as the old powerbook with the same content.

Testing web site with video

Hi I have built web site for mobile devices with video (what use RTSP for transfering the video) Please tel me some emulator for testing this site(which look like mobile phone.I know that i can use user agent on Mozila ,but i like some difernet solution)
Please describe step by step how to achive this.

The Nokia S60 and S40 SDKs (Software Development Kits) have Windows based emulators. You can download the SDKs from Forum Nokia:
http://forum.nokia.com

Why does my mac keep freezing when i link to sites with videos

why does my mac keep freezing when i link to sites with videos

Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/

Problems on viewing OEM with video on the Adobe viewer APP on ipad air 8.1 with EDGE ANIMATE CC 2014.1

hi everyone
i had this problems and i don't know if is for my fault or is something related to a bug
i made an animation with a video ( i try it before just with an mp4, but later i add also the OGV in the same Group ) and one object , if you click on the object you launch a website link on a different windows and the video and the stage are in PAUSE, if you click again the video the video START.
it's very simple and on the web preview ( and on the export for WEB package ) all works properly, but if i want to view by the Adobe content viewer APP on my connected ipad ( via indesign ) i'm not able to see the video i just see the poster image and the object ( with the working link, that launch a new tab in the APP), but NOT the video in background!
INDESIGN procedure
In indesign i add the OEM on my page and launch via the folio overlay the preview on my connected ipad
is not the first time i work with animation on DPS APP, and everytime all works good
after quite a whole day on try different solutions but with the same result i hope in this forum to find help on solve this problem, from more experienced people than i
thanks in advance
cristiano

UPDATE
i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
www.eclipseadv.com/maliRP/maliRP.html
Untitled
via SAFARI or CHROME on MAC all OK
but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON and the link if i click on it (not in Mercury), like in the content viewer.

How do I verify my website https site with you? The caution triangle needs to disappear.

www.needlepointnow.com has a caution triangle symbol next to it's https address.
What are the steps to verify my site with firefox? Keep in mind I am not IT but a lowly graphic designer. So step-by step please.
This has to be resolved so our readers feel secure renewing subscriptions.

The specific error being given is "ssl_error_no_cypher_overlap", which usually means your https is using an outdated method of encryption. You (or whomever manages your server) needs to update to a more modern encryption method or else you are leaving your customers at risk.

I have a m2007 macbook connected to my wireless network using time capsule. I stream video to the macbook, but often get start stop of the streaming, but no wheel to indicate a buffering issue. Can I resolve this with higher speed internet and cable mod

I'm wondering if my cable internet is too slow for wireless streaming of videos to other macbooks. Any help will be appreciated

Can you clarify whether you are asking about video that you are streaming from the Internet to your Mac through the Time Capsule?
Or, are you asking about streaming video that is already stored on the Time Capsule to your Mac?
In either case, what happens....video quality wise..... if you test by temporarily turning off the wirelss on the Mac and then connecting it to one of the LAN <-> ports on the Time Capsule using a spare Ethernet cable for a few hours?

When I start-up my computer it has a Flashing ? in a Folder. I removed the HDD as then plugged it in via USB and it worked, but just won't work with it inside the Macbook.

So, I just had a bit of a hurried train journey, two connections very close together, resulting in my laptop bouncing around a bit inside my bag (in a case). The Macbook was shutdown the entire time, but when I tried to start it up it came up with a flashing folder with a "?" in the middle of it after the start-up "bong".
I proceeded to remove the hard drive to check if it was okay, and it worked fine via USB into my iMac, so I am now running my Macbook Pro from a hard-drive that is completely naked outside of its shell.
What could have gone wrong other than the hard drive, bairng in mind that it is all working perfectly well with the hard-drive plugged in via USB. I was thinking it could be the ribbon cable that connects the hard-drive internally, however I had this replaced not long ago after a previous complete hard-drive failure, but that's a story for another time.
If anyone could help I'd be very appreciative, as my macbook looks ghetto as all **** right now, as I have the hard-drive sellotaped to the left of my trackpad.

If Apple was the one that replaced the ribbon cable, return it. If not, run AHT (Apple Hardware Test).
Using Apple Hardware Test to troubleshoot a hardware problem
Your issues might be caused by a hardware problem. Running Apple Hardware Test can help you solve this problem by showing you the faulty hardware.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold the D key on the keyboard before the grey starting screen appears.
Continue to hold the D key until the loading screen shows up. You should see a globe.
When AHT has loaded, select your Language and then press the Return (↩) key.
Select the Perform Extended Testing checkbox located under the Test button.
Press the T key, select the Test button, or press the Return (↩) key to start running the diagnostics.
Report any issues it shows in a reply.
I hope I helped.

Cinelerra problem with video in the composer window

Hi,
After going through many distributions here I am a happy User's Arch.
One thing I feel very lacking in Linux, even more today that I do not use windows at home for anything is the fact that I can not find video editing software that is really good.
As researched a lot and not found anything that is really good in terms of video editing, I believe that it should meet my Cinelerra nescessidade because he in fact work this transaction and videos, etc ... Despite not liking anything on your interface would be able to use it.
If anyone has any tips please help!
The problem is that some crashes are annoying in the Composition window where it plays the video, it's not like I had with 3D acceleration.
And really annoying, I can not do anything without seeing the video in real time as it's getting and the parties must move ...
I tested several software recommended and one that I liked was the Avidemux which unfortunately does not work with multitrack and has no effect. The demics found it very bug. The Pitivi the crash here whenever I zoom in the video track ...
An error that could not noticing this is in red below when I install Cinelerra.
Continuar a instalação? [S/n] s
:: Obtendo pacotes do repositório extra...
ilmbase-1.0.1-1-i686 313,9K 60,4K/s 00:00:05 [######################] 100%
openexr-1.6.1-1-i686 3,3M 256,1K/s 00:00:13 [######################] 100%
verificando a integridade do pacote...
(3/3) verificando conflitos de arquivo [######################] 100%
(1/3) instalando ilmbase [######################] 100%
(2/3) instalando openexr [######################] 100%
(3/3) instalando cinelerra-cv [######################] 100%
Deps Opcionais para cinelerra-cv
libgl: needed for the X11-OPENGL video driver support
My 3D acceleration is enabled, I have a good hardware ...
Proc: Core (TM) 2 Quad CPU Q8200
Distro: Arch Linux i686 + compiz + gnome (in desperation I tried to disable compiz tb and nothing ...)
Motherboard: Asus P5Q
Mem: 4GB
Video: 9800GT
My video card is properly installed, so that the game Counter-Strike Source online with no problem locking or low performace via Wine.
I made a video also likely to demonstrate better to the problem, note the constant locking Composer window.
If I leave the video running too long, it speeds up from nothing and and then starts playing normally, follows:
http://www.youtube.com/watch?v=Fku-juUTmbU
Sorry for bad english
Thanks!
Last edited by cellexpert (2010-10-07 02:12:58)

Hi,
I noticed that the problem is related to libgl same.
The NVIDIA drivers make a link to this file sombolico thus
lrwxrwxrwx 1 root root 10 Out 10 20:12 /usr/lib/libGL.so -> libGL.so.1
lrwxrwxrwx 1 root root 15 Out 10 20:12 /usr/lib/libGL.so.1 -> libGL.so.256.53
-rwxr-xr-x 1 root root 765460 Out 10 20:12 /usr/lib/libGL.so.256.53
I tried to remove the symbolic link and the program crash when I play the video
I think that's why I can not use other programs that want video acceleration, eg
Pitivi -> lock and close (crash) when I zoom video
Google-Earth -> tb's crash when a dialog will appear (those with balõezinhos info)
There is another that I can not remember now.
I tried using the nvidia driver directly from the site, version 256.53 Geforce 9800 GT
It's the same problem ...
I tried the version contained in the 173 nvidia pacman repositories and it's the same problem.
If someone can give me a help, thank you!
Att

User friendly site with videos

i purchased master collection cs3 package. i have tried
different ways to have multiple .flv videos on dreamweaver site.
during the test run some were unable to view videos and complaint
about the site being slow and videos did not open but others with
broadband service were okay.
My question is what is the best way to go about it?
I also used the template from adobe site and tried to be
creative. My work is stalled since I am afraid if I put more
videos, and it does not work, my work will go waste. I put a lot of
time learning adobe software after switching from frontpage. i am
trying not to give up.
Can someone help please. thank you.
lima

limabravo9 wrote:
> i purchased master collection cs3 package. i have tried
different ways to have
> multiple .flv videos on dreamweaver site. during the
test run some were unable
> to view videos and complaint about the site being slow
and videos did not open
> but others with broadband service were okay.
> My question is what is the best way to go about it?
> I also used the template from adobe site and tried to be
creative. My work is
> stalled since I am afraid if I put more videos, and it
does not work, my work
> will go waste. I put a lot of time learning adobe
software after switching from
> frontpage. i am trying not to give up.
>
> Can someone help please. thank you.
> lima
A couple things, try encoding at a lower rate, don't
auto-start them,
let the user play the one they want, or just put each one on
an
individual page.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

What's wrong with videos in the iPod touch?

Videos added to my iPod touch won't show up in iTunes. Thus, not only can I not know what videos I have from iTunes but, because of this, the only way to delete videos is from the iPod touch.
I have a word around where I can create a playlist and put all my videos there. Unfortunately, I still can't delete them from iTunes because that will only remove them from the playlist.
Finally, I'm afraid to modify any tag information for my videos. It takes an unacceptably long time for the information to update and you can corrupt your video if you cancel it with the stop button on the progress dialog. Seriously, it takes about as long as the video to update the tag of a video. So, an hour long video can take an hour to update the tag information.
I've done a search and, so far, no one has described this strange behaviour. Do I just have a defective iPod touch?
Thank you...

No, I haven't. If simply adding videos to my iPod is so buggy, I'm afraid at what a complicated procedure like synching might do. I feel like the iPod is so delicate that any unexpected input will corrupt it irrevocably. I've already had to reset it due to data corruption (which wasn't fun)...
If the device can't deal with manually added videos, why do they let us? Why not force us to synch like with photos? It's tempting to try to return it except that this can't be anything other than a software problem and no one else seems to have this issue. Am I the only person on Earth who doesn't sync? It's interesting that you automatically assumed that I was doing so. So much so that you interpreted my post as describing some form of synching, as if there was no other way to use one's iPod.
I'm fairly disappointed in this infernal device...

I found a site with videos of the macbook !! :-) enjoy

Similar Messages

Maybe you are looking for