I found a solution to zen battery probl

About 2 weeks ago I went to use my microphoto for the first time in two or three months and it turned out that the battery was drained and would not charge no matter what. I put the battery in the freezer for a few days and viola... back to normal. Try it and let me know if I just have good luck

Yes, it's right! It works very well!I used this technique for alkaline batteries and NiMH batteries.But I never tried with battery of Creative mp3 player.

Similar Messages

  • I HAVE FOUND THE SOLUTION FOR THE FIRMWARE UPDA

    I'm sure most all of you have had this same problem I <strike>had:</strike> When you try to install the firmware update it says 'Plug in your player'!!? A very frusterating message mainly when your player is CLEARLY plugged in. So here's how I came about my solution!?I endlessly searched on this support forum, and I found that several people had found the solution several different ways!? Then other people have tried other's solutions, and it worked for some, but not all!?The forums have obviously pointed the problem at the computer, and not the player. They are halfly right, the problem isn't what you do on the player, but it's what they do to the player. I figured that there was something that the succesfull posters?did in the mean-time between posts that the unsuccesfull posters didn't do. It also didn't make sense, like others said was the problem, that it was Windows Media Player!? They said that you needed to roll it back, downgrade, to WMP 9 or 0. This made absolutely no sense to me because when I brought up WMP , and 0 for that matter, it recognized 'creative ZEN touch' under the 'synch' tab. After I found the solution, sorry for writing so long about how instead of just what it is: I just wanted to make it clear that this is the solution, I told my dad what it was!?He said that it made perfect sense because when my older brother tried to upgrade his firmware on his Dell MP3 Player, a message said that:It must be fully charged!?Beore you mess up your computer deleting all of these files and waste your time, try plugging your player into the wall at the same time it's plugged into the computer!? Then run your firmware update and bravo!? You are back in buisness!?Here is what to do in a little easier reading format:?. Plug your player into the wall.2. a. Plug your player into the computer.?b. (your player, at least my ZEN touch, should have the 'Docked' screen up. I'm not completely sure how this comes about, but I think that it'll appear that way while downloading the firmware update.)? If not, then try it anyways!3. Go to http://us.creative.com/support/downloads/?and search by product!4. Download the firmware update.?I hope that the moderators and admins find that this is, in fact, the solution!? Make this a sticky or something!? Your loss, not mine. :smileysurprised:

    for all of you that fall in this...
    sorry guys it was supposed to be a postponed April fools day joke!!           
    ... i believe you will forgive this little silly joke of mine       
    hehhe
    Markoul

  • Zen V:M 60 GB- solution to Zen not recognized by pc and not charg

    Problem:? Zen V:M 60GB not being recognized or charged by my PC. After the initial install, I thought?I had done everything right, so I left the Zen connected to the USB port to fully charge overnight. I went to turn it on the next morning but the Zen was?unresponsi've and would not turn on, eventhough the blue LED light near the power button was flashing. I immediatley uninstalled then reinstalled the software, same results. I then hit the Creative site and tried all of their fixes, but nothing worked. Email support was redundant and forget about Creative's phone support, with their inconvenient times, that needs to be addressed, come on Creative?it's called?"outsourcing". So I was left to fend for myself.
    Solution:? Connect the Zen to the PC and Insert the installation CD. Only select the Zen Vision M software from the list of "software to be installed", uncheck the others, click "next" and STOP what you're doing!. At this point, patience is required. Wait until the Zen battery icon pops up on the Zen screen and/or until the Zen turns on. The window of opportunity is small at this point, so immediately start the software install. If you have the software installed already, then select the "Repair" option. If this is a complete reinstall then proceed with the installation as directed.
    In a nutshell, the Zen has to have some power in order for the software and pc?to recognize the player. What we all did was, after receiving the Zen for Xmas, we all turned it on and started?messing with the player and then the battery died before installing. Hopefully this resolves your problem. Good luck!

    Well after resetting the thing for the 0th time it seems to be ok. Although I don't know why the first 9 were any different. If it continues to work then disregard this thread. If not I'll post it with any follow-up problems.

  • I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. After long hours, I discovered that if I change the name of the mailbox, the content works.

    I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. The title of the mails stored in the mailbox appear, but the content was unavailable.
    After 4 long hours at the phone with the Apple staff unable to help me, I discovered that if I change the name of the mailbox, the contents of the mails stored there become available.
    Please, make this solution available to other people!

    You have found the the way to share it.   Include your problem and its solution in a forum post in the Mavericks forums.   Then mark you own post with a green solved star.
    Note.  You won't get any points for that; points are only awarded where you mark someone else's post as either helpful or solved.

  • "Adobe has found a solution or workaround for the recent crash in Adobe Flash CC" ...not really.

    Hi guys,
    My Flash CC crashes all the time, it's always been doing it since when I started using it on CS4, and I've somewhat given up on this bug being fixed, it crashes at least 20-30 times every document I create. I'm using a Wacom Bamboo Fun Pen&Touch tablet and drawing a lot, I think the problem is that it can't handle this much drawing.
    Anyways, it just crashed and for the first time after reopening I found this nice message from Flash:
    "Adobe has found a solution or workaround for the recent crash in Adobe Flash CC.
    Please click here for further details."
    Excited, I clicked on it! At last, a solution! Amazing!
    ...but it just points to http://www.adobe.com/
    ... I don't understand.
    What's happening? I'm genuinely puzzled.
    Also, anybody else experiencing frequent crashes?
    Thanks!
    Ciao!

    Yes, this is not good -- you're already mad when it crashes, then "We found a solution!" But, for me clicking on the link does nothing - no link even to adobe, just a tease - nothing opens.
    It's bad enough crashing a couple times a day and losing work (I do save every chance I get), but then to get taunted with this bogus message, it's discouraging and exactly the best 'user experience' for a really expensive product from company that is all about helping professionals create good design/user experience ..
    I like the way this is headed though! it just doesn't work right now.

  • 24" Cinema display is flickering every 30 seconds or so. Has anyone found a solution?

    I have a 2009 Power Mac tower with a 24" cinema display also 2009. About a year ago the display started flickering, like it was turning on and off. I've got a duel display set up and the other one (older acrylic 20") works fine. I've checked the cords, updated to the latest soft wear, at least I think I have. I see others having the same issue. Has anyone found a solution? This is really annoying when trying to do graphics work. Any help would be much appreciated

    Hi 517 Design, 
    Thanks for visiting Apple Support Communities. 
    If you are seeing flickering on your Cinema Display, you can find many additional troubleshooting tips in this guide that can be helpful:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Best Regards,
    Jeremy

  • Has anyone found a solution to sending mail to groups in Mavericks? I've been given 2 approaches - 1 to type user name group into address and the other to go to address book and right click on group. Neither are satisfactory. Does anyone have a solution?

    Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.

    thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.

  • Has anyone found a solution to the issue of default email account on iPhone continually changing?

    I am seeing an irritating problem with the default mail account, calendar and contacts list on my iPhone 4.
    Every so often (I think it happens randomly after syncing or even just connecting the iPhone to my iMac without syncing) I notice that some or all of my default email account, calendar and contacts list have changed away from my desired default (which is my Exchange account).
    The iPhone is running iOS 4.3.5 (8L1) and I'm using iTunes 10.4.1 on my iMac.
    I found this discussion: https://discussions.apple.com/thread/1639451 dating back 2 years to the days of iOS 2.1 without any solution. Googling hasn't helped me find any answers yet.
    I have 5 accounts set up on the iPhone - a MobileMe "Find my phone" account that's only used for that purpose, not email, a GMail account, a couple of vanilla IMAP accounts and my main, Exchange 2010-based account that I use for mail, contacts and calendar.
    Most frequently after a change I find that the default email has switched to the GMail account, the calendar and contacts lists have switched to my iPhone and most of my Exchange account mail folders are empty and have to re-sync when I tap on them.
    I know from Googling that other people have been seeing similar issues.
    Has anyone found a workaround or solution?

    Has no one found any solutions to this?
    Or at least what causes it (so that it might be avoided)?
    I find it difficult to believe this issue has existed so long in iOS without being addressed!

  • Anyone found a solution to the corrupt preferences issue: CS4?

    Soooo, annoying. I don't understand how Adobe can have 20+ years of experience with Illustrator and still not have fixed a few simple things. I keep getting the corrupt preferences warning every time i open ill. I can't find any solutions anywhere for this. What is the deal?   
    If anyone can let me know how I can take care of this annoyance I would really appreciate it. It's driving me crazy.

    Sorry, ya. Silly me.
    Windows XP Pro. Running as admin.
    I've deleted the settings folder. No effect. If I reboot Ill will present the same warning. If I close Illustrator for a couple hours, same thing. It's a common problem. I've seen plenty of people on the web complaining about it, including on this forum, but have never found any solutions that work. The common suggestion is to either move the settings folder or delete it altogether and have illustrator rewrite the pref file but like most other people out there, that hasn't worked. The issue is recurring. The other is to delete the pref file upon illustrator start up. Still same issue. No matter what, when illustrator closes it corrupts the pref file or when it opens it doesn't recognize the pref file as valid. Quite annoying. So, my recent files don't show up, my keyboard shortcuts, gone, my scratch disk settings, units, all of that has to be redone everytime. My workspace is unaffected though. So really, it's just the pref file. It really is quite annoying. Any help from anyone would be greatly appreciated.

  • HP PSC 2355 Has anyone found a solution that worked ?

    Re: HP PSC 2355 all in one
    Has anyone found a solution that worked?
    This printer used to work fine with Tiger – after a lot of headaches setting it up. Seemingly, after downloading a latest 10.4 up-grade, I lost all functions with this 3 in 1 printer. I’ve done all the procedures on the HP site, purged everything HP on my computer relating to applications, and re-installed the software. However, the printer does not show up on the ‘Printer List’ in the ‘Printer Setup Utility. Error message stating that ‘No default Device Detected’ or, Error ‘Sorry, scanner could not be initialized. (Scanner not found.)
    Any help would be greatly appreciated.
    Thank-you,
    Steve
    iMac G5   Mac OS X (10.4.7)   iMac G5 1.8GHz, 20in.

    Re: HP PSC 2355 all in one
    Has anyone found a solution that worked?
    This printer used to work fine with Tiger – after a
    lot of headaches setting it up. Seemingly, after
    downloading a latest 10.4 up-grade, I lost all
    functions with this 3 in 1 printer. I’ve done all the
    procedures on the HP site, purged everything HP on my
    computer relating to applications, and re-installed
    the software. However, the printer does not show up
    on the ‘Printer List’ in the ‘Printer Setup Utility.
    Error message stating that ‘No default Device
    Detected’ or, Error ‘Sorry, scanner could not be
    initialized. (Scanner not found.)
    Any help would be greatly appreciated.
    Thank-you,
    Steve
    iMac G5   Mac OS X
    (10.4.7)   iMac G5 1.8GHz, 20in.
    I am not sure if you are having the same issue or not since you did post this back in Dec but itf it is still a ongoing problem after downloading updates to the Mac OS follow this docuemnt --------------------------------------------------> http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00501015&produc t=422000&dlc=en&lang=en
    And by the sounds of it i know you have gone though this document already
    Download this driver it is the lates driver and it fixes alot of things
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=422000&lang=en&softwareitem=mp-42125-1
    G4 Mac Mini   Mac OS X (10.4.7)  

  • Has anyone experienced, if so found a solution to having electrical shock, tingling, pain and burning in fingers hand and wrist from using the apple mac computers??

    Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook??  If, so have you found a solution??  Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative

    I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives.  They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded.  I can't explain it, and I just make sure not to touch them at the same time.
    I have never had any sensation touching just one of the devices alone.  Is that what you are experiencing?

  • My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?

    My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?

    Sorry, does this link work
    http://www.apple.com/support/appleid/
    I ended up having them call me then was able to give them 1 of my secret questions right and they reset things so I could reset all my secret questions.
    Try going into contact support and see if you can schedule a call. There seems to be some issues with peoples' id's and this update. iTunes thought that I'd never bought anything from my computer or device before, and I clearly had, so it's like it got confused. THen I tried to get my questions reset, but the mail never came, which is why I just got a phone call because I felt it was 'real person' time.

  • I reply to an email on my iPad. When I view the same email on the PC in MS outlook there is no indication that I have replied to it. Has anyone found a solution for this?

    I reply to an email on my iPad. When I view the same email on the PC in MS outlook there is no indication that I have replied to it.
    Is there an email app that I can use?
    Has anyone found a solution for this?

    This seems to be an annoying part of the newer OS.  When I first got my Pearl in 2008, I didn't have that occur.  However once the OS got upgraded, and now with the Tour, it seems like that is the way it works.  Not clear to me why they would have thought this is preferable.

  • Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

    Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.  Cloud control panel version 2.0.

    Has anyone found a solution for the error "The iCloud Control Panel did not install properly".  I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.  Cloud control panel version 2.0.

  • Has anyone found a solution to the login problem with Lion?

    I upgrade my 27" iMac Quad-core last week to Lion and everything was fine. I shutdown after a software upgrade and now I can't log in. Of course, Apple support is closed. I tried a number of the solutions on this site to no avail. Has anyone found a solution? *** has apple done to my system?

    Don't know if my problem is same as yours..after Lion install, frozen cursor in password field when logging in after starting up, beach ball. Couple of trips to Apple store, a number of phone calls to troubleshoot with Applecare. The last fellow who helped me found a workaround, just can't log in. He said engineers have reports of others with this problem so it's not just my machine but fix would probably come in software update. Been dealing with this since first week of Lion download. Hopefully they'll fix it eventually. I can use macbook now, but don't like not being able to have a screen login via password. No plans to ever again download a new op system on a mac...had no trouble installing win7 on older dell from vista.

Maybe you are looking for