I found an error when I changed the contact information.
I found an error when I changed the contact information.
Yesterday, I imported all my contact information from my old phone to my brand new iPhone 4S at an AT&T store. Everything looked fine, but all the first names and the last names were switched. So, I had to correct all contact information manually again. It was so ridiculous.
When I corrected the contact information, the names on my contact list were not changed immediately. For example, when the name of a person, ‘Doe John’, was changed to ‘John Doe’, the name on the contact list was not changed and remained as ‘Doe John’. After I rebooted my iPhone, the name on the list was changed correctly. Do I have to reboot every time when I switched the first name and the last name?
My iPhone Information
IPhone 4S White 16G
Model: MC924LL
iOS Version: 5.0.1 (9A405)
Is ths display order for contacts set the way you want it?
Settings > Mail,Contacts,Calendars > Display Order
Similar Messages
-
Error when I change the BOM without a change number
Hi,
I would like to receive an Error when I change the BOM without a change number.
I define the modification parameter (EC management active and History reqmnt), I configure history reqmnt for BOM (I choice the status 1 and 3 for my BOM usage 5)
In change the message type I dont have the really message number in the liste.
How can I create a new message (045) so that I get an error by changing the BOM without a change number.
ThanksDear Dede,
check for the Authorization Object C_STUE_NOH for the
particular User Id's for which you want to Create or Change a
BOM without a Change number.
So assign this Authorization Object under all user id's for which
you want to have this control.
Adding the mentioned Authorization Object in particular User
Id's will resolve the problem.
This can be done using PFCG T code by adding in particular
Roles.
Revert back incase of any clarifications.
Regards
Mangalraj.S -
My family and I recently got iPhones for Christmas. One for my dad, one for my mom, and one for me. We also have an iPad 2. They are all hooked up to iCloud via one username. When we got the phones, we had trouble transferring our contacts from our old verizon phones to our new apple ones but we eventually got the contacts we needed. At first, my mom's phone was not connected to the iCloud account shared by the rest of us and the iPad. She wanted the calendar from the iPad so I deleted the account on her phone and added the iCloud account that the iPad was using. All was fine until my dad and I realized that our contacts were wiped from our phones and replaced with my mom's. I then started painstakingly deleted my moms contacts and replacing them on my own on my phone. However, contacts were being deleted from my mom and dad's phone at the same time. It's almost like the three phones are constantly synching with each other. It would be ideal if we could get all of our contacts back the way they were before my mom changed her account but we would settle for this constant synching to stop. Please give us some direction here, we are new to this. Thanks in advance!
Why is it that when I change the contacts on my phone, it changes them on my mom and dad's as well?
Because, as you said "They are all hooked up to iCloud via one username. ". That is exactly what iCloud does.
You need independent iCloud accounts for each person to maintain independent contact lists. -
Error when I change the visibility of a context node
Hi,
I had to change the visibility of a context node (ZActivityH) to public (it was private) in the context to access it in the method DO_HANDLE_EVENT. I used transaction BSP_WD_WORKBENCH. I verify and activate it.
As a result of changing the visibility, I have this error:
Class CX_SY_REF_IS_INITIAL
Text: Dereferencing of the NULL reference
Program: ZL_CRM_IC_IRECREASON_IMPL=====CP
Include: ZL_CRM_IC_IRECREASON_IMPL=====CM00C
Source Text Row: 8
The new source code in method DO_HANDLE_EVENT is:
DATA category TYPE STRING.
category = ztyped_context->ZActivityH->GET_CATEGORY( ATTRIBUTE_PATH = '' ).
Any idea about the problem? Can I modify the visibility of a context node?
Thank you very much for your help.
María JoséThanks a lot, Patrick,
My context node is null, but I don´t know why.
I have:
In Class: ZL_CRM_IC_IRECREASON_IMPL
Attribute ZTYPED_CONTEXT type ref ZL_CRM_IC_IRECREASON_CTXT
In class: ZL_CRM_IC_IRECREASON_CTXT
Attribute ZACTIVITYH type ref ZL_CRM_IC_IRECREASON_CN10
In class: ZL_CRM_IC_IRECREASON_CN10
Method GET_CATEGORY
In method CREATE_CONTEXT_NODES:
model = owner->create_model(
class_name = 'ZL_CRM_IC_IRECREASON_CN10'
model_id = 'ActivityH' ). "#EC NOTEXT
activityh ?= model.
In view Im filling the context node:
Regards,
María. -
DYNPRO_SEND_IN_BACKGROUND error when we change the userid
I have created a RFC which will run the program RPCEOYG0(GB year end report) by using BDC and we are calling the RFC by web dynpro application to get PDF form display. The input for this RFC is u2018USERIDu2019. Now the problem is that it is working fine for only one userid and for rest of the users it is not able to display PDF form in portal and in u2018ST22u2019 transaction Runtime Errors u2018DYNPRO_SEND_IN_BACKGROUNDu2019 are recorded. We have already checked the SU01 transaction for the authorization of other useridu2019s but everything is same for useridu2019d at SU01 transaction.
Can someone help on this?
Thanks,
Prashanth J RPrashanth,
This error occurs when you call an RFC that tries to get user input or run a report as if you we in the SAPGUI. There are also a number of other reasons you could receive this error, but if you do an external debugging on the RFC, it will narrow down your issue.
To External Debug,
Go to your RFC in transaction SE37
Click on Utilities --> Settings --> Debugging Tab
In the "External User" field, put the userid of the user you want to debug. This is who you will log in with on the portal or web side.
*Make sure the user you enter here has external debug permission
Go back to your RFC, find a line of code that is not a declaration, click on it, then click the external debugging button (It looks like a stop sign with a person in front of it).
Then run it from the web side and wait unitl the ABAP debug window pops up and step through the code to see where this ST@@ "DYNPRO ..." error is being generated.
Regards,
Tom -
1. HP Pavilion m6 Notebook PC
2. Windows 7 64 bit
3. none
4. I accidentally deleted IDT Audio, i was trying to get rid of programs that i didnt need, i didnt know this controlled beats.
i noticed that my Beats Audio Control Panel was gone and i searched online and found out i needed to re-download IDT, so i did. Beats Audio Control Panel is now back but when i change the volume up, down, or off, it shows an ugly little megaphone icon and ugly little white bars, instead of the shiny silver beats logo and the silver bars. I hate the new logo with the mega phone how can i get the beats logo back?
i tried a system restore from before i uninstalled IDT but it still has the same problem.
Please reply with any ideasHi,
Try reinstalling the HP OSD Utility on the following link.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
After this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
how to resolve unresolved column error when we change column name in BMM Layer and removed alias in presentation layer
Looks like the presentation column got Alias before your BMM changes, so in your case renaming logical column and deleting alias is not good to go.
Keep Alias -
Error when applying changes in Form
I get the following error when saving changes in a form. The Form was created using the Report and Form application. If someone can pls help, I would greatly appreciate it!!
ORA-20505: Error in DML: p_rowid=APL11163, p_alt_rowid=transcontrolnum, p_rowid2=, p_alt_rowid2=. ORA-06550: line 1, column 99: PLS-00201: identifier 'transcontrolnum' must be declared ORA-06550: line 1, column 9: PL/SQL: SQL Statement ignored
Error Unable to process row of table APL_TRANSACTION
OKYou should check the source of your page items:
P?_TRANSCONTROLNUM
It looks like you don't have this column in your table or there is a typo in the source.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Error when jumping to the OLTP system
Hi Gurus,
Some data loads are failed, when our BI consultant tries to analyse the issue, he getting the error " error when jumping to the OLTP system " " Screen output without connection to user"
We are using BI and ECC 5.0 as back end system.
Please let us know how to resolve the issu.
Thanks in advance
VJHello,
I have changed user to Dialog user but still the the same issue.
Please guide me how to go ahead.
VJ -
Why are my apps changing when i change the orientation from landscape to portrait
Recently, on my ipad mini retina, when i change the orientation from landscape to portrait, the apps change. For example, when i enter a game like impossible and change to landscape to play it and then exit the screen has shifted to either the right or left and shows the first line of the next pages apps. Its kind of like when im in the middle of changing from one page to another but it only changes back to normal when i tough the screen. Im not sure if this has anything to do with the new 7.1 ios but it is becoming really annoying
I know it is not a specific app problem because it happens when i come out of some of my apps, it doesnt happen all of the time, only sometimes. Also if any of you could help me with another issue with the same device, when i connect to wifi/hotspot i get static on the screen, it is very noticable when i show a dark picture or a large amount of the screen is a dark colour but i wanted to know if this was normal with the ipad mini retina. I have seen discussions about this device having problems connecting to wifi but i havent found any discussions on this. Does anyone know could cause this?
-
I get a error when i open the criteria of a Alert subscription
Hi All,
I get this strange error when i open the criteria of a Alert subscription.
Below is the screen shot of the error and the contents of the alert.
Can any one help.
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Id='' -- Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.AddParameter(SqlCommand sqlCommand, String parameterName, ColumnDefinition columnDefinition, Object parameterValue, Boolean stronglyTypeParameter)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateNextOperand(XmlReader criteriaReader, String parameterBaseName, SqlCommand sqlCommand, QueryDefinition queryDefinition, ColumnDefinition columnDefinition,
Boolean stronglyTypeParameter)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.NextPredicateWithPropertyOperatorAndOperand(StringBuilder criteriaStringBuilder, SqlCommand sqlCommand, QueryDefinition queryDefinition, ColumnDefinition columnDefinition,
String propertyName, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateGroup(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues)
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.DataAccess.ExecuteQuery(String queryDefinitionName, String criteriaXml, Pair`2[] parametersAndValues, String inClauseColumnName, ICollection`1 inClauseElements)
Gautam.75801Was any changes made to the Notifications Internal Library MP?
Do you have a recent/latest backup copy for the MP? if yes, you may want to reimport it.
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway -
I always get "general error" when I change value of "Digitizer"
I tried to capture a Prores422 project by FCP6 and Kano3 card.
I changed setting of "Capture Preset Editor" to ensure capture what I needed.
I think parameter value of "Digitizer" will determine Bit Depth of the project.
The original value of "Digitizer" is "AJA 8-bit Digitizer". If I selected "AJA 10-bit Digitizer",it will pop up generel error.
If I re-select the value to "AJA 8-bit Digitizer", it will still pop up general error.
Please give me a hand.
Is bit depth (8bit or 10bit) is determined by the setting of "Digitizer"?
If yes, why does it always pop up general error when I changed it.From the information available it appears that your install could be conflicting with a previous version or installation. I would recommend reviewing your installation logs to verify the root cause of your difficulties. You can find directions on how to review your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
-
When we change the non-mandatory field in the form, it doesn't get updated
Hi... I have one question here..
If I have non-mandatory fields in a custom form, and when I query the form and change the value in the non-mandatory field and click on save, then it doesn't save. It says 'No Changes to Save'. But, it's not the same for non-mandatory fields.
Can you please suggest me?
-vrdidaVRdida,
If I understand correctly, you have a non-Required item in your form that has an LOV assigned. While this item is Required=No, it works correctly. When you change the Required property of the item to 'Yes' then it fails. When this occurs, do you get an error message? Are you able to select a value from the LOV?
It sounds like the Required=Yes property might be preventing you f rom opening the LOV. Try setting the Module property: Defer Required Enforcement = Yes. This is the typical setting in an EBS form. This is what allows you to navigate out of a Required field if the value is NULL, but will give you a Required message when you attempt to save the record if the value is still NULL.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Apr 6, 2011 11:43 AM -
TV goes black when i change the channel?
On my Toshiba LCD TV quite frequently (at least once a night) the screen will go black when I change the channel (via cable box) or if I change the input. I then have to turn the TV off then back on to get the picture back.
I have the same problem and it is frustrating. I called the cable company who told me to unplug everything from the wall for 1 minute and the plugit back in. "Duh" Unfortunately I had to do this every few hours. I called them back an they performed a reset from their end. It has worked fine ever since.
Mark
"Faith is the ability to see the invisible, believe in the incredible, and achieve the impossible".
Medical Billing And Coding Jobs
Maybe you are looking for
-
Java iView Runtime Error while loading EP Logon page
hi, When i load my Enterprise Portal from the url http://epserver:50000/irj/portal i am getting the following error page. Anyone please help me in this issue. The Error Page content is given below: Java iView Runtime Version : 6.4.200410200018 + Copy
-
It says it needs my permission to make changes. I have completly uninstalled and reinstalled latest ver from website. Same results?????? I use Firefox to get 64 bit in windows as flashplayer does not work on IE at 64 bit.
-
I think I remember answering this myself right after Win 7, but I'm stumped. I just did a re-install from scratch. All went well except for two things: 1) One device - "PCI Simple Communications Controller" - has no driver 2) Huey Pro installs fine,
-
NFORCE2 on K7N2 Delta Series..HOW TO MAKE IT WORK!!!
If you have a K7N2 Delta Series, and are experimenting problems with 200FSB, and you are sure its not caused by PSU / RAM / Jumpers Settings / Incorrect Installation / Overheat, or anything else.... FLASH YOUR BIOS !!!!!!!!!! http://www.msi.com.tw/
-
Send mail trough a FORM in IAS
Hi all, I have a form that sends a mail and in the mail there will be some global variables. I can get it to work when testing with developer, but in production under AS Portal it doesn´t work. Can someone provide help for this? Best, João Rico