I get a 213.10 error after installing Captivate

Why do I get a 213.10 error after installing Captivate 7 on a Windows 7 32 bit workstation?

These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?

Similar Messages

Getting a reistry error after installing telling me to reinstall itunes

I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
Thanks,

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Recently built a new pc, getting a 0xc0000001 error after installing windows 8

I recently upgraded pretty much my entire PC after having my old processor go out. Built a new PC off of a MSI Z77A-GD65 motherboard, which is why I registered on this forum. Pretty much all the parts are new besides my GPU which was somewhat recently upgraded anyways. Anyways I built this PC and everything in functioning perfectly hardware wise but for some reason Windows 8 just doesn't want to boot up after I ran the installer on a fresh hard drive. I keep getting this 0xc0000001 error and I tried all sorts of repair options which I fear may have screwed something up since I am now getting two windows 8 installations showing up.
Anyways I just want to get windows working so any help would be appreciated.

Here is one solution that you might try: http://techmell.net/how-to/fix-error-code-0xc0000001-windows-8/

Error code 213.11 after installing trial version of Photoshop Elements

I keep getting Error Code 213.11 after installing the trail verison of Photoshop Elements. What or how can I fix this.

THANKS FOR YOUR QUICK ANSWER, UNFORTUNATELY THIS IS ALL FOREIGN TO ME, i TRIED FIDNING THE FLEX NET FOLDER AND COULDN'T FIND IT. dO YOU KNOW OF ANY OTHER SOFTWARE THAT ALLOWS YOU TO EASILY PUT YOUR PHOTOS INTO ALREADY EXISTING DIGITAL FRAMES, NOT A DIGITAL FRAME FOR YOUR COMPUTER, BUT WILL LET YOU ADD YOUR OWN FRAMES AND INSERT PHOTOS INTO THEM. i'M AT A WIT'S END ON WHAT TO DO, I'VE TRIED GIMP AND PAINT.NET AND WATCHED VIDEOS ON HOW TO DO THIS AND IT IS NOT ALLOWING ME TO DO IT LIKE IT SHOWS. iS THERE SOME OTHER FORMAT THAT THE DIGITAL EFFECTS FRAMES SHOULD BE IN OR THE PHOTOS, i'M LOSING IT I'VE SPENT COUNTLESS NIGHTS AND CAN'T FIND AN EASY PROGRAM TO LET ME DO THIS. THANKS FOR ANY HELP YOU CAN GIVE ME. LORI

Why am I getting '500 Internal server error' after installing CF 10?

Hello,
I am not able to get to CF admin after installing CF 10. I am getting a '500 internal server error' along with the following message. How do I get around it? Thanks.
Best regards,
Chung Lee
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: java.lang.NullPointerException coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:129) coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:203) org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:539) org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) java.lang.Thread.run(Thread.java:722)
root cause
java.lang.NullPointerException coldfusion.CfmServlet.init(CfmServlet.java:82) coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121) coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59) org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:203) org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:539) org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) java.lang.Thread.run(Thread.java:722)
note The full stack trace of the root cause is available in the Apache Tomcat/7.0.23 logs.

Anit,
The following is from the workers.properties:
worker.list=cfusion
worker.cfusion.type=ajp13
worker.cfusion.host=xxx.xxx.xxx.xx (My work does not allow me to reveal IP address.)
worker.cfusion.port=8012
worker.cfusion.max_reuse_connections=250
worker.cfusion.connection_pool_size=500
worker.cfusion.connection_pool_timeout=60
As for the exception log, it's showing the following:
"Error","pool-2-thread-1","06/02/14","13:00:00",,"Unable to initialise Monitoring service: java.lang.NoClassDefFoundError: Could not initialize class coldfusion.featurerouter.FeatureRouter"
java.lang.NoClassDefFoundError: Could not initialize class coldfusion.featurerouter.FeatureRouter
    at coldfusion.server.CFService.setupMonitoringService(CFService.java:464)
    at coldfusion.server.CFService.start(CFService.java:671)
    at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:110)
    at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:86)
    at javax.servlet.GenericServlet.init(GenericServlet.java:160)
    at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
    at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
    at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1266)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1185)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1080)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5001)
    at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5278)
    at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1525)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1515)
    at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
    at java.util.concurrent.FutureTask.run(FutureTask.java:166)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
    at java.lang.Thread.run(Thread.java:722)
"Warning","Thread-10","06/02/14","13:00:00",,"Graphing service is unavailable"
java.lang.NullPointerException
    at coldfusion.graph.GraphingServiceImpl.setUpWatermark(GraphingServiceImpl.java:220)
    at coldfusion.graph.GraphingServiceImpl._initializeGraphingEngine(GraphingServiceImpl.java:1 44)
    at coldfusion.graph.GraphingServiceImpl.access$300(GraphingServiceImpl.java:40)
    at coldfusion.graph.GraphingServiceImpl$2.run(GraphingServiceImpl.java:125)
"Error","Thread-12","06/02/14","13:00:01",,"The Runtime service is not available. This exception is usually caused by service startup failure. Check your server configuration."
coldfusion.server.ServiceFactory$ServiceNotAvailableException: The Runtime service is not available.
    at coldfusion.server.ServiceFactory.getRuntimeService(ServiceFactory.java:117)
    at coldfusion.document.DocumentServiceImpl.initializeDocumentService(DocumentServiceImpl.jav a:219)
    at coldfusion.document.DocumentServiceImpl.access$000(DocumentServiceImpl.java:52)
    at coldfusion.document.DocumentServiceImpl$1.run(DocumentServiceImpl.java:180)
--Chung

Getting error after installing admt 3.2

hi team
i am getting error after installing the admt 3.2 on server 2008 R2 where i have installed sql server 2008 sp1 with express edition
the server is a DC
the error is "Unable to check for failed actions. :DBManager.IManageDB.1 Unable to retrieve the database file pagth from the registry. the system cannot find the file specified"
Thanks,
viraj

You should change the forum type on this to a question. The way you have this labled as a discussion not a problem.
See if the link below helps you out.
http://support.microsoft.com/kb/2266373
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
http://www.pbbergs.com Twitter @pbbergs
http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided "AS IS" with no warranties, and confers no rights.

When I attempt to re-download Lion to my MacBook Air I get the following error: localhost Install Mac OS Lion[436]: Retrying pisa://1183a0570:::/InstallESD.dmg after 1 failure(s). I am trying to re-install the OS after erasing having erased the drive.

When I attempt to re-download Lion to my MacBook Air I get the following error: localhost Install Mac OS Lion[436]: Retrying pisa://1183a0570:::/InstallESD.dmg after 1 failure(s). I am trying to re-install the OS after erasing having erased the drive. Any ideas?

I had the exact same issue; Lion recovery from Command + R would hang with the logs showing the same message. To resolve, I used Disk Utility to remove the recovery partition. My Air then used Internet Recovery to load all the tools. When using Reinstall via Internet it worked just fine.

Not able to get the login page after installing 12.1.1

HI,
i am not able to get the login page after installing in the 12.1.1. when i accessed from client machineo.Please help me in fixing out this problem.
Thanks,
venkat.

Hi,
What is the OS?
What is the error message?
Any errors in Apache/Database log files?
Thanks,
Hussein

Error after Install SAP NetWeaver 7.01 ABAP Trial Version

Hi Everyone,
I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
Someone could help me?

Hello Marques Polastri ,
->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
Try to connect to the database NSP & let us know the results.
-> Please update with output of the following commands:
dbmcli db_enum
dbmcli -d NSP -u <control>,<pwd> db_state
Thank you and best regards, Natalia Khlopina

Relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express)

Hi,
I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
=========================
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
appr60ue.LIST
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Unable to get the objects for module "APPR60UE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
=========================================
Has anyone faced something similar in the past?
Regards,
Neeraj

Hi Helios,
That got resolved after I added the location of the dll in the PATH.
Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
The log looks like:
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe
-MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
gnumake: ***
[D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Regards,
Neeraj

My Xperia Mini Pro Touchscreen error after install Custom Rom , and now Bricked / Bootloop

Hi There. .
I've some problem here. .
My Xperia Mini Pro SK17i Touchscreen error after install Custom Rom , and now Bricked / Bootloop
I've tryin' to use Flashtool and flash Stock Firmware, but it still bricked. .
Any body may have a sollution for me?

*Moved to Android development*
Hopefully you can get some help here.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HP4501e "print spooler off" error after installing printer update

Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

Loralee,
?? I am sorry the computer is not working. I don't work for HP and cannot comment on lawsuits or other calamities.
If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
If you are using a Notebook:
Close all your programs and shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook model
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The procedure does not wipe out your files nor does it destroy your Windows setup in any way. This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
This does not fix severe Operating System errors -- it is just a device reset. It can fix minor problems that updates sometimes cause.
============================================================================
I am sorry you are having so much trouble.
Other help:
HP Mobile Printing
You can call HP for help --
Contact HP – USA - Phone Assistance
List of
HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Happy New Year, Loralee! I know it seems to be getting off to a rocky start!
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

Read/Write errors after installing SSHD

After installing a Seagate Thin 500GB SSHD into my Late 2008 MacBook Pro, I would get errors after my computer had been asleep for several hours. The error codes end with -50. I thought that limiting the speed of the drive with a jumper would work, but it hasn't.

This is from the Toshiba knowledge base : http://forums.toshiba.com/t5/Computer-Troubleshooting/Errors-after-installing-new-advanced-format-ha...
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Please Help Me, Windows Form Error After Install

help me to fixed this errors after install visual basic
Instances of this error (1)
1.
Hide Call Stack
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse..ctor(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse.GetUniverse(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkProvider..ctor(IVsDesignTimeAssemblyResolution assemblyResolution, IDesignTimeAssemblyLoader assemblyLoader, TypeDescriptionProvider parentProvider, IVsSmartOpenScope openScope)
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.get_TargetFrameworkProvider()
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.GetProvider(Type type)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.Deserialize(IDesignerSerializationManager manager, CodeTypeDeclaration declaration)
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.DeferredLoadHandler.Microsoft.VisualStudio.TextManager.Interop.IVsTextBufferDataEvents.OnLoadCompleted(Int32 fReload)

Hello,
I am afraid that I could not get any error message form that list you shared, is there any other message about that error?
To narrow down this issue, I would recommend you check the following suggestions.
1. Rebuild your project and debut it to see whether it could work.
2. If #1 works fine, then publish it and install that application to check whether there is any issue while installing.
3. If #2 works too, then you could share the screenshot and the detailed error message with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.

Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena

I get a 213.10 error after installing Captivate

Similar Messages

Maybe you are looking for