I get a black white sceen and can't restore

I get blank white screen and can't restore an ipod.

What happens when you try to restore?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

When I boot up I get a complete white screen and can't access any thing including task bar. When I right click and hit properties it says it is a Firefox docum

I downloaded a video in a zip file, when it started the whole window went white. When I right click on the screen under properties it tells me it is a Firefox document. I rebooted to fix the problem and I saw a brief view of my wallpaper and desktop icons then back to the white screen. When I boot up or log in to the admin account (guest account is fine) I get a pure white screen. I cannot access any thing including the task bar. The only way out is to reboot and the problem repeats. I have booted with my anti virus program and it finds no problems. When I exit the anti virus program there is the brief view of the desktop and back to the white screen. HELP, I don't want to lose everything because I have to reload the OS.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
If you are in full screen mode then hover the mouse to the top of the screen to make the Navigation Toolbar and Tab bar appear.<br />
Click the Maximize button (top right corner of the Navigation Toolbar) to leave full screen mode or right-click empty space on a toolbar and choose "Exit Full Screen Mode" or press the F11 key.

When i active my mac pro all i get is a white screen and it loading .. and when it fully loaded it turns off and the same thing keep on happening again

when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours

Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you!

I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?

I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?

System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen

I scanned a black & white negative. Can I turn it into a positive in PS?

I scanned a black & white negative. Can I turn it into a positive in PhotoShop?

Check System Preferences>Accessibility and make sure 'invert colours' isn't ticked under 'Display'.

I am scanning black/white photos and making a few adjustments - retouching and cropping. The photos then turn red. Why?

I am scanning black/white photos and making a few adjustments - retouching and cropping. Some (only some) of the photos turn red. Why and what do I do to correct this problem?

This is because we've scanned the photo's using grey scale.
Through further searching I found a solution thanks to Terence. You can convert your already scanned photos to the required sRGB format by doing the following:
Open Automator. Select your photo's that need converting from the file and drop into Automator.
You can create an Automtor workflow to assign an sRGB profile to images.
The variable you want is 'Apply ColorSync Profile' to images and then select sRGB from the drop down.
Hope this helps!

How do i delete everything off my iphone 6 before i send it off to get repaired after water damage and can't use it

how do i delete everything off my iphone 6 before i send it off to get repaired after water damage and can't use it

If it does not respond when plugged to a computer running the latest version of iTunes, then it is indeed dead and no content will be recoverable.

I keep getting the same junk messages and can't get rid of them permanently. Any suggestions?

Please help - I keep getting the same junk messages and can't delete them permanently. Same thing happens in the Trash folder. Anyone have suggestions?

Please help - I keep getting the same junk messages and can't delete them permanently. Same thing happens in the Trash folder. Anyone have suggestions?

Every time I try to get on youtube or netflix on safari all I'm getting is a white background and a lot of links and boxes with question marks in them, what is going on?

Every time I try to get on youtube or netflix on safari all I'm getting is a white background and a lot of links and boxes with question marks in them, what is going on?

Make sure your system software is up to date.
Click the Apple  menu (top left in your screen) then click: Software Update ...
And try troubleshooting Flash. Uninstall then reinstall.
http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,

Hi I have a black iphone 4s and can not find the hole spacing to insert the sim Tarjet

Hi I have a black iphone 4s and can not find the hole spacing to insert the sim Tarjet

See p. 12 of the User Guide...http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HT4907 i am trying to set up an airdisk that is connected to my parents airport extreme, though next to my iCloud account details i get a yellow status light and can't get a hold on the airdisk being connected to an other internet connection..what should

i am trying to set up an airdisk that is connected to my parents airport extreme,
though next to my iCloud account details i get a yellow status light and can't get a hold on to the airdisk when i'm being connected to a different internet connection..what should i do?
sharing is enabled and i entered the right account details.
the disk shows up connected to my parents network, but i want to access it from my place as well

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Why if you open multiple applications, my phone became a white screen and can not do anything

why if you open multiple applications, my phone became a white screen and can not do anything ?

Mohe2192 wrote:
i just open 3 application and than my handphone become white screen ?
That is not normal. Very few apps are actually running in the background. What troubleshooting steps have you taken? Have you reset the phone by simultaneously pressing the Home and power buttons until the apple appears? Restored from back up? Restored as new?

HT1766 Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?

Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?

In settings>general> cellular do you have it turned ON?

Can not update error 1602 and can not restore error 1604 what is the solution

Have a IPod touch 4, can't update (error 1602) and can't restore (error 1604) any solution?

try this support article.

When I statred iTunes match I lost some of my music and all my playlists, has anyone had this problem? And can I restore it?

When I statred iTunes match I lost some of my music and all my playlists, has anyone had this problem? And can I restore it?

Restore your media from the backup of the computer created prior to restoring the computer.
You did create a backup, correct? Not doing so would be extremely unintelligent.
iOS devices are NOT backup devices.

I get a black white sceen and can't restore

Similar Messages

Maybe you are looking for