I get a blue creen error If I had photos stored on my Iphone 3 GS.
If I had photos stored on my Iphone 3 GS, when I connect it to my Windows xp PC, I get a blue creen error.
If there's nos photos stored, nothing happen and everythings work fine. Thanks for any help...
Unfortunately, if these photos had not been transferred off the phone in some way, before restoring from the previous backup, they are now gone.
Did you have iCloud's Photostream feature setup? If so, they may have been uploaded to that.
Similar Messages
-
I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?
Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
Cheers, Tom -
After starting iTunes 11, I get a blue screen error
So after I updated my iTunes to v11, it started up and it was great! Then I rebooted my PC. After logging in, I started iTunes 11. Nothing happened for a few minutes. Then the screen became black for half a minute or so and then I get the blue screen error. Now this is happening all the time when I start iTunes 11 or if I connect my iPod Touch 4g for starting.
Please help out!!! I want to open iTunes but knowing that I'll get a blue screen error, I can't. Please help!!! I can understand if you are getting the same problem.
Thank You!!Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
Cheers, Tom -
When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected." iPhoto eventually launches but iTunes will not launch iTunes. iPad will not charge. Restarted iMac and rebooted iPad and no difference.
Hi GJ374,
Thanks for using Apple Support Communities. This article has steps you can take for issues with your iPad not being correctly recognized in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Ari -
Satellite A300D-1EI - blue screen error - display drivers had failed
I 've bought my laptop a month ago.
Everything is working great except two "blue screen" errors caused by the graphics card.
Both were when the laptop was connected with TV through S-video port.
First was when the laptop display turned off after 15 minutes while watching a movie, on resume said that display drivers had failed and then I got the blue screen. Then I updated the display drivers from ATI's website and set the laptop display not to turn off.
All were ok with no problems, until last night when I got another message that display drivers had failed followed by a blue screen.
I am wondering if this is a driver's problem or is something wrong with my graphics card.
System Info:
Processor: Intel Core 2 Duo CPU T8400 @ 2.26 GHz
Memory (RAM): 3.00 GB
System Type: 32-bit Windows Vista Home Premium
Display Adapter: ATI Mobility Radeon HD 3470So long you use ATI driver from ATI support page there is no possibility to say anything about it.
This driver is not tested and Toshiba cannot offer any help about it.
So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
Test it please and let us know if the problem persists.
When you want to watch movies on TV at first switch to the TV and then start DVD player. -
Error message when importing photos into iPhoto from iPhone 4S
Why is this happening? This is the message I get when I now try to import my photos off my iPhone "ERROR DOWNLOADING IMAGE: iPhoto cannot import your photos because there was a problem downloading an image." PLEASE HELP ASAP. Thanks!
Good afternoon
There seem to be a number of possibilities.
Here is a thread that conatins a number of solutions. The most common one is to load 50 pics at a time.
https://discussions.apple.com/thread/3947440?start=0&tstart=0
Hope this helps -
Why do I get "there was an error working with this photo"?
In LR 4.2, have begun seeing this error message when I apply a keyword to an image. When I move to an adjacent image and return to the original, the keyword shows it has been applied. I cannot see any problems with viewing or editing images but am concerned as I'm seeing this error message up to 10 times per day by rough count. So, in all it is appearing to be a nuisance but with no visible impacts.
Every time I exit LR, I backup the catalog with an integrity test and optimization. When I return, I see no problems with images that received the error when a keyword was applied.
Background: Have a catalog with over 14,700 images that for all other purposes runs fast and well. The images receiving the errors are TIFF scans of negative 4x5 sheet film. In the "active" part of the catalog, there are 519 images.
Have a Mac Pro running OS X 10.6.8 with all patches applied. LR 4.2, current version. Over 410 GB hard drive space available. Eight GB RAM on machine.
Have scanned Adobe Community and done a general Google search with no hits reporting this error message with no apparent other issues.
Appreciate learning I can ignore with confidence or advice on how to stop/avoid repetition.
DougYes. When I am watching, it seems to complete the autowrite in a few seconds after making a change.
-
Lenovo N 500 Blue Screen Error
I just purchased this laptop in February and shortly thereafter I started to get the blue screen error message. It only happens after the screen tries to wake up from hibernation. I have not been able to turn hibernation off.
The system has Windows Vista Home Basic; Version 6.0; Build 6001P1
Any help would be greatly appreciated. I just don't know what to do and when I tried using the lenovo care, it said that the update service would not be available until May. This is already the middle of May.
Thank you
Message Edited by WLove on 05-17-2009 08:03 PMyou can see the error properly if you disable this option
just uncheck the option.you can get this dialog box if you go to advanced system properties
Its not an easy thing for me as well,you may get solution for your BSOD in micrsoft support. thats why i was asking for more info regarding your error
Message Edited by vijaysaradhi on 05-18-2009 11:35 AM
Message Edited by vijaysaradhi on 05-18-2009 11:36 AM
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
My C5180 All-in-one has, all of a sudden, stopped working. When trying to print, I get a blue screen-error and the pc reboots.
The following is the error description provided by windows after the reboot:
Name of Error: BlueScreen
OS-version: 6.1.7600.2.0.0.768.3
Country-id: 1030
Additional info on error:
BCCode: 1
BCP1: 0000000077A2FF2A
BCP2: 0000000000000000
BCP3: 000000000000FFFF
BCP4: FFFFF8800545FCA0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files describing error:
C:\Windows\Minidump\050110-31859-01.dmp
C:\Users\CURRENTUSER\AppData\Loca\Temp\WER-55796-0.sysdata.xml
Sincerely
NielsenWith the blue screen it can be a few things that are interifering with it. First thing unplug anything from the usb ports on your computer and if you have like a logtech webcam make sure it is unplugged and also that if it is built in disable the driver. If you are on a pc you may want to go into device manager and update your usb drivers on your computer.
use these articles
http://support.apple.com/kb/TS2280
http://support.apple.com/kb/TS1502 -
Blue screen error after updating to iOS8
After I updated my OS to iOS8.0.2...... I am getting a blue screen error again and again.
WHenever I will be using any application or opening any new application suddenly it will close with a blue screen.Then iPad restarts By itself.
PLease suggest.Hi Chinmayee,
If your iPad is restarting unexpectedly, I would suggest that you troubleshoot using the steps in this article -
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
Thanks for using Apple Support Communities.
Best,
Brett L -
Blue screen error and start up failure
i have a problem with my hp pavellion 15 notebook (n020nr) im getting various blue screen errors that keep saying all the time, when my computer is restarting it shuts down but my led s caplock and the flight mode are still on, so i just press the power button and holding it for 15 and it keeps the same, so i have to take out the battery and the charge and hold the botton for 30 seconds so after that i just unplug in the charge and it turns on and it works fine for atleast 5 or 6 minutes and then it shows the blue screen error dpc violation and sometimes i got driver power state fauile, the computer is not very old i got it from Telus company 4 or 3 months ago, please if someone could help me i would really appreciate.
P.S sorry for my englishHi sebastian24,
Welcome to the HP Forums! You mentioned the Caps Lock keys stays on, does it flash at all? If so how many flashes in the pattern? This will help us determine the cause of the errors. These blue screens are commonly referred to as a Blue Screen of Death and can be quite difficult to fix. If you just purchased it you should still be in warranty, I recommend that you call HP Total Care at 1-800-474-6836 in North America or visit the link below if you are outside North America.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Blue screen error while instaling.
Hy
I get the blue screen error when i install the flash player.
Windows 7 32 bit
Firefox 16.0.1 32 bit
I had the older flash version but i removed it tryng to solve the problem but no succses.
This is the version i try to install
11.4.402.287
i dont remember the older one.but it was making updates every time a newer version was coming.
This is the error
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: d1
BCP1: 01000018
BCP2: 00000002
BCP3: 00000000
BCP4: 82221031
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\101312-16005-01.dmp
C:\Users\Silviu\AppData\Local\Temp\WER-25896-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtHello pleurisy,
Your system is getting an error when trying to play a game.
This might be caused by the system getting too hot.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If your still getting the error, go to HP.com and update the BIOS.
Here is a link to the update.
Also make sure that the system does not have a buildup of dust inside the system.
Take the side panel off and clean the inside of the computer with compressed air.
Let me know how everything goes.
Have a good day. -
Camera related blue screen error, why?
When I plug in my iPhone 3GS to my Win32 XP Pro I get a blue screen error as soon as iTunes opens.
I have tried several fixes. I updated my BIOS, uninstalled and reinstalled the iPhone camera driver and used different USB ports.
So far nothing has worked. Please help. (I already know a phone upgrade will help)I forgot to mention that I don't have this problem when I plug in my iPad to this computer.
-
Recovery Problem - Blue Screen error (STOP: 0x00008086)
I am working on a Toshiba Satellite laptop and need to recover back to original state. I do not have Recovery Disks, however, I have followed the Toshiba 'How to' instructions (F8 then select Repair your Computer) it show the Windows progress bar then goes to a black screen for a while then I get a Blue Screen error (STOP: 0x00008086).
Is there any way to get around this?Hi
If the HDD recovery does not work then you need the recovery disk.
Here you can order this.
https://backupmedia.toshiba.eu/landing.aspx
Greets -
Hi,
I am getting the blue screen error on windows 7. When I am opening IE9, i am getting blue screen.
I have uploaded the dmp file in the sky drive and shared the link below.
http://sdrv.ms/1cByXDL
file name is :122513-46488-01.dmp
Thanks in advance.
Nanda kumar R | Senior Technical Analyst | Merrill Technology ServicesHi,
Use !analyze -v to get detailed debugging information.
BugCheck 50, {fffff8810a4191a0, 0, fffff8800836bf68, 5}
*** WARNING: Unable to verify timestamp for igdpmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdpmd64.sys
Could not read faulting driver name
Probably caused by : igdpmd64.sys ( igdpmd64+159f68 )
Followup: MachineOwner
2: kd> !analyze -v
* Bugcheck Analysis *
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8810a4191a0, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8800836bf68, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)
Debugging Details:
Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800036c7100
GetUlongFromAddress: unable to read from fffff800036c71c0
fffff8810a4191a0 Nonpaged pool
FAULTING_IP:
igdpmd64+159f68
fffff880`0836bf68 8b0408 mov eax,dword ptr [rax+rcx]
MM_INTERNAL_CODE: 5
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff8800d08d9e0 -- (.trap 0xfffff8800d08d9e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88008d989a0 rbx=0000000000000000 rcx=0000000101680800
rdx=fffffa800466d920 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800836bf68 rsp=fffff8800d08db70 rbp=fffffa80083a7d40
r8=0000000000000001 r9=fffff8800d08dbd0 r10=0000000000000001
r11=0000000000000001 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
igdpmd64+0x159f68:
fffff880`0836bf68 8b0408 mov eax,dword ptr [rax+rcx] ds:fffff881`0a4191a0=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff8000350c5b3 to fffff8000348fbc0
STACK_TEXT:
fffff880`0d08d878 fffff800`0350c5b3 : 00000000`00000050 fffff881`0a4191a0 00000000`00000000 fffff880`0d08d9e0 : nt!KeBugCheckEx
fffff880`0d08d880 fffff800`0348dcee : 00000000`00000000 fffff881`0a4191a0 fffffa80`06a58000 fffff880`0d08df70 : nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`0d08d9e0 fffff880`0836bf68 : fffffa80`06a58000 fffffa80`0466d920 fffffa80`06a58000 fffffa80`0466d920 : nt!KiPageFault+0x16e
fffff880`0d08db70 fffffa80`06a58000 : fffffa80`0466d920 fffffa80`06a58000 fffffa80`0466d920 fffffa80`06a58000 : igdpmd64+0x159f68
fffff880`0d08db78 fffffa80`0466d920 : fffffa80`06a58000 fffffa80`0466d920 fffffa80`06a58000 fffff880`080b4040 : 0xfffffa80`06a58000
fffff880`0d08db80 fffffa80`06a58000 : fffffa80`0466d920 fffffa80`06a58000 fffff880`080b4040 fffffa80`07be9298 : 0xfffffa80`0466d920
fffff880`0d08db88 fffffa80`0466d920 : fffffa80`06a58000 fffff880`080b4040 fffffa80`07be9298 fffff880`00000000 : 0xfffffa80`06a58000
fffff880`0d08db90 fffffa80`06a58000 : fffff880`080b4040 fffffa80`07be9298 fffff880`00000000 fffffa80`087f4ff8 : 0xfffffa80`0466d920
fffff880`0d08db98 fffff880`080b4040 : fffffa80`07be9298 fffff880`00000000 fffffa80`087f4ff8 fffff880`0836c39c : 0xfffffa80`06a58000
fffff880`0d08dba0 fffffa80`07be9298 : fffff880`00000000 fffffa80`087f4ff8 fffff880`0836c39c fffffa80`087f4fe8 : 0xfffff880`080b4040
fffff880`0d08dba8 fffff880`00000000 : fffffa80`087f4ff8 fffff880`0836c39c fffffa80`087f4fe8 fffffa80`0466d920 : 0xfffffa80`07be9298
fffff880`0d08dbb0 fffffa80`087f4ff8 : fffff880`0836c39c fffffa80`087f4fe8 fffffa80`0466d920 fffffa80`00000001 : 0xfffff880`00000000
fffff880`0d08dbb8 fffff880`0836c39c : fffffa80`087f4fe8 fffffa80`0466d920 fffffa80`00000001 fffff880`00000001 : 0xfffffa80`087f4ff8
fffff880`0d08dbc0 fffffa80`087f4fe8 : fffffa80`0466d920 fffffa80`00000001 fffff880`00000001 fffffa80`0466d920 : igdpmd64+0x15a39c
fffff880`0d08dbc8 fffffa80`0466d920 : fffffa80`00000001 fffff880`00000001 fffffa80`0466d920 fffff880`0d08dcc8 : 0xfffffa80`087f4fe8
fffff880`0d08dbd0 fffffa80`00000001 : fffff880`00000001 fffffa80`0466d920 fffff880`0d08dcc8 fffffa80`087f51a8 : 0xfffffa80`0466d920
fffff880`0d08dbd8 fffff880`00000001 : fffffa80`0466d920 fffff880`0d08dcc8 fffffa80`087f51a8 fffffa80`087f5608 : 0xfffffa80`00000001
fffff880`0d08dbe0 fffffa80`0466d920 : fffff880`0d08dcc8 fffffa80`087f51a8 fffffa80`087f5608 fffffa80`00000001 : 0xfffff880`00000001
fffff880`0d08dbe8 fffff880`0d08dcc8 : fffffa80`087f51a8 fffffa80`087f5608 fffffa80`00000001 fffffa80`06a58000 : 0xfffffa80`0466d920
fffff880`0d08dbf0 fffffa80`087f51a8 : fffffa80`087f5608 fffffa80`00000001 fffffa80`06a58000 fffffa80`00000000 : 0xfffff880`0d08dcc8
fffff880`0d08dbf8 fffffa80`087f5608 : fffffa80`00000001 fffffa80`06a58000 fffffa80`00000000 fffffa80`0466d920 : 0xfffffa80`087f51a8
fffff880`0d08dc00 fffffa80`00000001 : fffffa80`06a58000 fffffa80`00000000 fffffa80`0466d920 00000000`00000001 : 0xfffffa80`087f5608
fffff880`0d08dc08 fffffa80`06a58000 : fffffa80`00000000 fffffa80`0466d920 00000000`00000001 00000000`00000000 : 0xfffffa80`00000001
fffff880`0d08dc10 fffffa80`00000000 : fffffa80`0466d920 00000000`00000001 00000000`00000000 00000000`00000000 : 0xfffffa80`06a58000
fffff880`0d08dc18 fffffa80`0466d920 : 00000000`00000001 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffffa80`00000000
fffff880`0d08dc20 00000000`00000001 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffffa80`0466d920
fffff880`0d08dc28 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x1
STACK_COMMAND: kb
FOLLOWUP_IP:
igdpmd64+159f68
fffff880`0836bf68 8b0408 mov eax,dword ptr [rax+rcx]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: igdpmd64+159f68
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: igdpmd64
IMAGE_NAME: igdpmd64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4cf338bf
FAILURE_BUCKET_ID: X64_0x50_igdpmd64+159f68
BUCKET_ID: X64_0x50_igdpmd64+159f68
As ZigZag3143x said, the memory dumps blame Intel graphic driver.
So I recommend you to download fresh graphics drivers from
http://downloadcenter.intel.com.
Also, could you please tell me if you have installed new updates (eg
kb2670838) recently?
Thanks!
Andy Altmann
TechNet Community Support
Maybe you are looking for
-
How can I connect two PS3 to the same Linksys WRT54G correctly
Hi, i'm trying to connect two PS3 to the same routeur without having conflicts. Everytime i try to update my game softwares it tells me error 80710723 or now 8002AD23. I gave the two PS3 different IP adresses, i opened all the ports that Playstation
-
Don't want video on my "Welcome Page"
I thought I dragged a video off the welcome page to my desktop, but it's still there. Hidden. I can't see it when working in iWeb, but it shows on the website. http://web.mac.com/thejarv/iWeb/THE%20JARV/Welcome.html See. It's off to the right side an
-
Photomerge in photoshop elements 7
The photomerge path in PSE 7 is not active
-
After four frustrating days of trying to install and use LR 2, it's time to cut my losses. LR 1.4.1 has been working pretty well and should do fine for me until this is sorted out. The steps I used that proved unsuccessful included: - Installing late
-
Smartforms page 1 of X in Zebra
Hi, I have a window in my SF with page 1 of X using Page: &SFSY-PAGE& of &SFSY-FORMPAGES& . This outputs fine horizontally but when I rotate the window it prints out like: 5 page 1 of Anyone seen this before? The window is wide and high enough. Thank