I get a blue line that runs left and right only on the games section, what is that?

I got a blue line that runs left and right & viceversa when I m on the games, can somebody help me? I don't know if that is a virus....I never got one so I don't know...

You do not have a virus. It sounds like you have turned on Switch Control, which can be turned back off in Settings > General > Accessibility. You probably have the Accessibility Shortcut feature turned on, causing a triple-click on the home button to activate or deactivate that feature. You can disable that shortcut in the same Accessibility settings.

Similar Messages

Will Apple ever put left and right arrows on the iOS keyboard?

Sometimes when I want to go back and fix a typing mistake or to copy certain words, it is a hassle to select the intended area. So I think it would be great if there were left and right arrow keys, or something like holding down one of the existing keys and moving to the left and right to move the cursor. I think that the space bar could work for that, maybe something like holding down the shift(up arrow) key and sliding left and right on the space bar.

http://www.apple.com/feedback/ipad.html

How do I get page numbers on the left and right side of the page?

I am finishing up a book in PAGES '08 on my Mac.
How do I get page numbers on the left and right side of the page.
I can get them on the page but I'd like them on the left and right sides.
Evan

If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
Control (right) - click on the open dmg icon and select "Eject xxxx" from the contextual window.
Then find the actual dmg file associated with those icons
and drag to the Trash in the Dock and empty.

CS6: No more Left and right arrow in the timeline

Hi everyone,
Adobe removed the left and right arrows in the timeline. I don't understand why because it was a functionnality that I was finding very convenient when comes the time you have to move accurately in a zoomed timeline. The moving bar doesn't work very well in this kind of situation.
Do you now if there is a convenient way to do the same wihtout these left and right arrows ?
Thanks

If you are referring to these arrows in the CS5 interface:
They have been removed in CS6:
note:
If you're new to CS6 from CS5, just wait until you try to select
a transition vs. a cut point in the Timeline.

Left and right click at the same time?

Is there a way to get the magic mouse to do left and right click at the same time? Useful for well.. gaming.

Check out the free Magicprefs software. You can then assign different functions to different clicks. swipes, taps, etc. There is an option for a two finger click and one of those options is "hold both right & left". It's free so you have noting to lose.
HTH

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns.

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns. Help please.

If you look closely at the top of the canvas pane, as you move either of the boxes (green or red) there is an indication of pixel positions... "top, bottom, left, right," and "scale."
Admittedly, it doesn't seem as if you can "enter" the dimensions with your keyboard, however, as you move the boxes, you have a real time indication of the boxs' locations.
(I couldn't take a screen shot, as you have to actively move the box with a mouse or other input device... thus, I could not also take a screen shot with same device.)
I hope this helps.

HT2515 I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?

I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?

Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com.

I'm updating my iphone4 to ios7 then my phone suddenly won't open, it only appears the itunes logo. what does that mean?

i'm updating my iphone4 to ios7 then my phone suddenly won't open. it only appears the itunes logo. what does that mean?

It means your phone is in recovery mode and you will need to restore it:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
GB

I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
Detlef

You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
1) There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
1) Record the audio just the way you have it. Two different recordings, one on each channel.
2) Copy the audio recording to a new name and open it in your editor.
3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
4) Repeat, only copy/pasting the right track into the left track and save the second recording.

How to create buttons that control left and right scroll?

I would like to know if there is a way to create two buttons, each on the left and right hand sides of the screen, that would control the horizontal (x-axis) scroll of my website. I've built two image buttons that link to anchors located on the left and righthand edges of the page, but this does not achieve the funtionality I'm looking for. I would like each button to scroll incrementally every time it is pressed.
Is this possible in Muse?

There are no facing pages in Pages 5.
Peter

While loging in my Facebook account apple logo shwed up then blue screen then black screen and my phone didnt work ever since . what is that

I searching my Facebook account when apple logo showed up then blue death scree then black screen after all white and black stripped screen . It happened for a few times the the phone went off and didn't work ever since . What was that ?
And how can it be solved ?

Back up and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file, or maybe it's one of your apps causing the trouble. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.
For the charging problem:
Inspect the charging port area for dirt/debris/fluff build-up that may be preventing a good connection and use a wooden toothpick, soft clean toothbrush, or a can of compressed air to clean it. Also look for bent or broken pins. Try another cable and/or charger block (be sure to always use a genuine Apple certified brand) in a known good outlet. If you're using a USB port, try another port. If you're using a hub, try a direct connection. If you're using a USB port in the front of a desktop computer, try one in the back. If all these fail, make an appointment at your nearest Genius Bar to have the device evaluated.

Left and right mouse coding for games

Hi
Can anyone point me in the right direction on where to find actionscript 2/3 coding for left and right mouse clicks for gaming. I am a student and want to design a game that will use both left and right mouse clicks on a object that will give different results depending on which mouse click you had made.
For example on a red object you click right, on a blue object you click left. Depending on how you clicked on a object will determine the next step in the code.
Does this make sense?
Cheers
Beth

I believe there is no method provided for isolating right clicks with a mouse in Flash. The right click is reserved for pulling up a menu and there are no properties associated with it in the code.

Why does iphoto want to chop off the left and right sides of the photo I'm trying to print?

Trying to print a group photo. Using the borderless setting, I still always lose half of the persons at the end of the rows. Why won't iphoto allow me to print the entire picture?

It actuallyhelps if you provide details including version of iPhoto and of the OS and what you are doing
with absolutely nothing but a problem my guess is that the print size is a different ratio than the photos size so somehting has to be left off - for example you can not print an 8x10 photo on a 4x5 piect of paper - depending on the camera you have your photos are either in a 3:2 ratio or a 4:3 ratio - the paper must be the same - or you must crop the photos to the paper size - or you must go to the customize screen and right click on the preview and fit to frame
onc eyou provide basic information more specific help can be provided
LN

Help! blue circle with itunes logo and picture of plug??? what is that? won't start

just intstalled new update 8.1.3 system shut down and now will not restart. Only give image of blue circle with music note and iTunes logo underneath with a plug leading to it? what does that mean?

It means something didn't go right during the update and your iPad is in Recovery mode. The same thing happened to me during the IOS 8.1 update. You need to connect it to iTunes on your computer, update it, and restore it from your iTunes or iCloud backup. If like me you don't have a computer take your iPad to the Apple Store and they will help you with the Restore process.

Opening a new URL, a blank page appears with 2 messages on the top left and right corner of the window: "Advertise here" and "Skip this ad" and it will not go to the requested site until I push "Skip this ad"

It would be nice to have the possibility to attach a print screen or something to give you a better idea what is happening and how it looks like.
Anyway, what I described above is accurate:
- the address bar shows the link where I wish to go
- but the page loaded is blank with these 2 hyperlink messages ("Advertise here" in the top left corner, and "Skip this ad" in the top right corner).
I would like to emphasize that it does not have to do with the requested URL: it does the same thing with all sites, all the time.

For me is the same, it's yet 6 months.
the blank page apears for the first 20-30 of the day's navigation, then no more.
For example: If I open firefox at 9 a.m., it appears until 9.30 more or less. If i surf the web until mignight, at 00.01 a.m. this page starts bugging me.
I have yust to click on the link "skip this ad" to return to the desired web page.
Using Adblockplus and NoScript plug-ins had sadly no effect.
I've read somewere that the ploblem should be an f**** adware called "directCPV"., and that the solution is toremove an .exe file called Directcpv.exe or somewhat else, but in my pc I haven't found any of those linked to this adware.
I tried a full system scan with an antivirus (McAfee), with Malwarebytes, Ad-Aware, ATF cleaner, Spybot, Exterminate-it but NO RESULTS.
I tried to do this in safe mode too.
No way cleaning the cache, temp files, cookies etc.
finally I tried to uninstall Firefox (cleaning all registry entry too) and reinstall it, but the problem is still there.
The only cure seems to be formatting the HD, but it's very last chance.
If someone have an idea, please post it here.

I get a blue line that runs left and right only on the games section, what is that?

Similar Messages

Maybe you are looking for