I get a error when I send a Email. Recipient "email@address" was rejected by server by sever

I set up my email the way the phone and iPad do. Very simple. It works most the time, but I am usually on wifi also. I ran into problem saying email was rejected by server, and it put email in my outbox. I looked in here to see if anyone had a good solution, then realized after reading the post I never actually checked my servers. My actual servers were different than the defaults that were set up. Example : the default server was mail.roadrunner.com, but the actual should be pop-server.roadrunner.com, and same for the smpt-server.roadrunner.com. Based on the ISP, must have the correct servers. But I was always able to send while on wifi. That part I did not understand. But since I fixed the servers, I have not seen any problem sending on either the iPad or iPhone. If you have not found fix, hope this may help if still having problem

Similar Messages

Why do I get this message when going on a website The requested URL was rejected. Please consult with your administrator. Your support ID is: 1074107325772756576

why do I get this message when going on a website The requested URL was rejected. Please consult with your administrator. Your support ID is: 1074107325772756576. I have only experienced this while trying to go on the Michael Kors website. How do I stop this from happening?

That's a problem on the web server, not on your computer.

New user, I get my mail on the phone, but can't send...message" sender address was rejected by server..Help please

New user, I get mail on the phone but can't send...message "senderaddress was rejected by server. Pleas help.

http://support.apple.com/kb/ts1426

HT1267 I am unable to send messages on my iPhone. I am getting an error when I send it. This just started this morning.

This is my first timeo n Apple Support. Suddenly this morning I am unable to send messages through my iPhone. I can send messages to one number, but all the other numbers I am sending to I receive an error message. Also, I can receive messages from the one number I can send to, but am unable to receive messages from any other number. What do I do to fix this?

Hi Steve,
No he has not turned iMessage off, infact when he sends me a message thru iMessage it says 'delivered'. I am at my wits end nd I don't know what to do anymore.

Hi I'm getting Lightoom error when trying to edit in Nik Software "Lightroom was unable to prepare the selected file at /Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing. It will not be opened.

Lightroom was unable to prepare the selected file at
/Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing.
It will not be opened.
what does this mean? can anyone help?

Yes it is on a portable drive yet I have already worked with it and exported it as a jpg. The problem arises whenever I try to edit in the plug-ins from Nik software...this just happened recently as it never happened before...for years?

HT201320 I cannot send e-mail, the message comes back. "Copy placed in Outbox, address was rejected by server" I think it may be real simple, can you help?

Can you help with my ipad problem?

Most, if not all ISPs and email account providers have similar limits to the following for personal/non-business email accounts as part of an overall effort to eliminate or reduce bulk spam emanating from the ISP's or email account provider's domain.
Any ISP or email account provider that doesn't impose similar limits is helping to contribute to the amount of spam that gets circulated.
.Mac has several safeguards in place to ensure that only .Mac members send messages with the Mac.com outgoing mail server.
Among them are reasonable limitations on:
The number of messages that can be sent each day (200 messages)
The number of recipients that can be sent to each day (400 recipients)
The number of recipients a message can be addressed to at one time (100 recipients)
There is also a 10 MB maximum size for messages sent or received using the .Mac mail system.

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until yesterday. HELP!

The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid. (This is the way I'm reading your question.)
If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance. If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements. (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
An email account setup is specific to an email provider, unfortunately. If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

I get an error when attempting to cancel my subscription to The Daily Read.

Anyone getting an error when trying to cancel a subscription? I get a website error. It's pretty frustrating. I also get an Ajax error when trying to send a message to an HP expert.

Hi havequick99,
Try the solutions located at this website: How to Manage, Pause, or Unsubscribe from Prints and Faxes
If you got an error at ePrintcenter.com, it may be the website was experiencing technical problems and you can try again.
Please post here if you this solved your problem (and select Solved) or if you need further help.
I work on behalf of HP.

Hey I'm getting an error when I'm using an AU plugin its saying"Host Error: illegal midi databyte2 an my logic crashes any tips? thanks

hey I'm getting an error when I'm using an AU plugin its saying"Host Error: illegal midi databyte2 an my logic crashes any tips? thanks

There is a minor issue with Logic where Logic sends corrupt midi data
to plugins when recording in loopmode (looptool),
we've released a hotfix for ElectraX 1.2 as well as fixed this in
ElectraX 1.3 (currently in beta).
ElectraX 1.3 is set for release in early July and if I remember
correct the current ElectraX demo also has the fix included,
so redownloading/reinstalling the demo should take care of it.
In the meanwhile another possible workaround is to switch off
loopmode when recording.
from TONE 2

Keep getting 5002 Error when trying to Sign In

Hello,
I created a new @me.com address today for a seperate Apple ID account. I am needing to sign into the iTunes Store, but I keep getting a response that says:
"We could not complete your iTunes Store request. An unknown error occurred (5002)."
Any ideas as to what's going on here?
I also took a screen cap of the issue:
Thank you for the help!
Marcus

Thank you for your response Carolyn; however, that article does not fix my problem. I am getting this error when trying to sign into the iTunes Store on my Mac.
I get the same problem when signing into the Store on the iPad or iPhone. I simply can't log in, but when I go to iCloud.com or the Apple ID login on Apple.com, it works.
Marcus

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

Getting an error when i am execution a BI query using ABAP.

Hi Expert,
I am getting an error when i am execution a BI query using ABAP. Its Giving me this Error "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying as bellow.
Property Data Integrity has been set differently to the system default.
Current setting: 0 for GHRGPDM12
System default: u2019 7 u2018
As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
when i am debugging , I am getting error from
create instance of cl_rsr_request
CREATE OBJECT r_request
EXPORTING
i_genuniid = p_genuniid.
this FM. Its not able to create the object. Can any one please help me out.
Thanks in advance.
Regards
Satrajit

Hi,
I am able to solve this problem
Regards
Satrajit

I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally.

I get a error when I send a Email. Recipient "email@address" was rejected by server by sever

Similar Messages

Maybe you are looking for