I get a "Landing - Error" message after logging in

I get a "Landing - Error" message after logging in Any ideas?

Hi ,
Thanks for joining the EE Community.
Have you tried clearing the cache in your web browser or using a different browser?
Thanks
James

Similar Messages

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    B-rock

  • Install error message after logging off OSX

    When logging out of Mavericks, I get an error message on the screen as it goes to black that asks me do I want to abort the installation or continue with the installation. It closes out to the login screen after pressing either button you press, one says "abort" the other states " "continue". This started a few months ago and I can't seem to remember if there was an install issue on an update to an app or if it was something else because you only get the error message when you log out of the user account or shut down the computer. I updated to 10.10.1 and it still appears exactly as with Mavericks OS.
    I don't have time to take a screen shot of the message in a yellow box as it disappears quickly, but it reminds me at the log in window in background via a female voice that the MAC needs my attention.
    Cant get rid of message, any help appreciated.

    Hi ,
    Thanks for joining the EE Community.
    Have you tried clearing the cache in your web browser or using a different browser?
    Thanks
    James

  • I get a video error message after update.

    When I go to one of my videos or go on youtube to watch a video I get an error message sayinh, "There was an error playing the file." Why is it saying this? Before the update everything was fine.
    Post relates to: Pre p100eww (Sprint)

    It looks that you may need to do a partial/full erase on the device. If you do not know how to do one here is the link. http://kb.palm.com/wps/portal/kb/common/article/23197_en.html

  • TS1424 When I try to download my purchased music I get the following error message after it repeatedly tries to download:    zero KB or 6.8 MB - stopped (err = -100000)

    This occurs whether I try to download to itunes on my PC with Windows Vista or to my iPod Touch (4th Gen).  Any suggestions please?

    On about the 50th try to re-download the track it finally worked for some unknown reason (??).  Any suggestions to help make sure this error doesn't occur again so I can maintain my sanity?

  • Why am I getting the same error message after replacing with a new cartridge?

    I have replaced the cartridge with two different new HP cartridges, but the message continues to say that cartridge is empty. In addition, it won't even allow me to print in black only.  Any suggestions?

    Please read this post then provide some details. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
    Are you using refilled/reman cartridges?  These usually have not been reset to show proper ink levels.  In this case contact your supplier or use genuine HP cartridges.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP LaserJet CP1025nw Color getting a Mispick error message

    I have a HP LaserJet CP1025nw Color printer, running on WIN 7 64-bit and I am getting a Mispick error message after almost every page that prints.  I have had this printer for the past 1-1/2 years and it has worked fine.  I replaced the black toner over a month ago with no issues.  The Attention light blinks and has to be rest after each print job.  I can print a test page then it errors, I clear it and then it will re-print the test page again.  I have cleaned the rollers, check for any loose paper pieces, changed the paper (type and size) nad have powered off & unplugged the power to the printer several times. It will come up with no errors and then once I send something to print, it will print it and then immediately after the page is printed the Attention light will start to blink. I have even gone as far as unintsalling the printer and reinstalling all the drivers and software, to no avail.
    Any help would be greatly appreciated.
    Thank you,
    Jarm1964

    This is probably a little late but it may help someone with the same issue in the future.  I had the exact same scenario - HP LJ CP1025nw color on Win7-64 and it suddenly started receiving the mispick error after every print job.  There was nothing stuck, no paper jam, no problem picking up paper, etc.  It turns out it was a setting on the printer - under Printer Properties (from Devices and Printers), on the Configure tab I had checked Allow Manual Duplexing and Jam Recovery set to On.  When I unchecked Allow Manual Duplex and turned Jam Recovery to Off, the mispick error went away.   Not sure which of the 2 was the culprit.

  • Unknown error message after I click sign in from the app stort

    Hello ,Excuse me if this has already been discussed.
    I have been prompted to download a new version of iphoto after discovered it missing my mac pro
    I get an "Unknown error" message after I click sign in from the app store to download.
    I can't download and I can't find iphoto.
    Have I lost all my I photos is one question I have.
    Thank you

    Your photos should be safe as they are in the Library.
    As to the download issue: contact Mac App Store support. There's a link on the right hand side of the Store Window.

  • Getting the error message while logging through work place after upgrade

    Hi,
    C:\Documents and setting\YP80002\Local Settings\Temporary Internet files\Content.IE5\GTKFGH6L\tx[2].sap
    Application not found
    Getting the error message while logging through work place.
    It is urgent
    Thanks,
    Sri.

    After upgrading the Batch file it worked fine.
    Thanks,
    Sri.

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • Runtime error R6025 message after log on to Vista - Flash Card not working

    Hi
    I'm a newbie & would appreciate any advice.
    I am getting a runtime error message R6025 when I log on to Windows Vista.
    When I click out of the box I then get a message saying Toshiba Flash Card not working.
    I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
    Sorry if I sound thick
    Thanks
    Neelie

    Hi
    I found this MS knowledge base article:
    +Description of the R6025 run-time error in Visual C++\+
    http://support.microsoft.com/kb/125749
    But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
    However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
    At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
    Bye

  • After my phone was fully submerged in water, I'm getting the overheating error message but the phone is not hot at all. Is this the result of the phone being damaged by the water?

    I dropped my iPhone 4S in my friends pool. It was fully submerged for about 30 seconds.
    We took it out, dried it and put it in rice. After 24 hours I checked the phone. It turns on and runs smoothly. It connects to the computer and syncs perfectly. But after a couple minutes of use I get an overheating error message. But the phone is not hot at all.
    Is this the result of the phone being damaged by the water? Is there any way around this? The phone works perfectly fine and isn't overheating at all.
    What can I do?

    Despite the error that I get after a few minutes, the phone does work fine.
    But by most peoples definition, the phone isn't working.
    I just want to know if anyone has been in my boat and if the overheat message without the phone overheating can correct itself or if it goes away with sufficient drying of the phone.
    I know its slim, but I figured I'd ask.

  • I'm getting an error message after importing a table through Dreamweaver into a page developed in Muse.

    I'm getting a couple of messages after importing a table through Dreamweaver into a page developed in Muse. I have compared the code of the page with the table with the page before I inserted the table and cannot find anything missing. the web address is http://gourmetdreams.com/weekly-menu.html
    How can I clear this up?
    I also noticed that when I uploaded the file there was one error: "- error occurred - Access denied.  The file may not exist locally,  may be open in another program, or there could be a local permission problem."

    Thanks for your help! I imported the table into Muse, then exported the site as html and opened it in Dreamweaver. I should've tried that in the first place but gave up when I couldn't edit it in Muse. I didn't know you could edit the html right in Muse. Also, my styling and the images I was using weren't showing up in Muse but once I opened it in Dreamweaver, everything fell into place. AND I could edit it! My client needs to edit this page every week, so I needed to be sure she could do that. She doesn't use Muse but does use Dreamweaver. At this point, I think I'll leave it alone and not try to style it with inline css. Maybe when I get a little more time, I'll try it. I just don't want to mess things up now that the're working.

  • I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

    JUst experienced the exact  same problem after changing password.Getting same message. Hope someone has an answer for this.

Maybe you are looking for

  • /etc/hosts and /etc/inet/hosts

    we're running Sol10x86 11-06 and notice that there's no link between /etc/hosts and /etc/inet/hosts as there has been on some previous versions. /etc/hosts is the only file that contains all of the info for our IPMP configuration, and that seems to b

  • Hindi Langauge has some strange character in zsca/installed_language=H

    Dear Experts, I have imported HINDI language and run the I18n for getting the values of the paramter zsca*, but it shows some strange character in it. And copied/paste the same thing in instance profile, but nothing works? Any idea how to get resolve

  • Area range command for route summarization

    Is "area X range" command applicable for summarizing intra-area routes of non-backbone as well as backbone area? ie, using this command, can summarized routes be sent from non-backbone to backbone and vice versa?

  • Instructions for Oracle Database Server Version 10.2.0.4 Patch 49

    Hi ! Before trying to do anything on the database by applying the patch I received from Oracle, I want to be sure to fully understand the readme file that is with the patch. Oracle 10g. Dataguard configuration I need to do CPU patch. I follow the pat

  • Slow backup between due to FWSM

    Dear All,              We have FWSM running  4.1(7) system software. It has multiple contexts. Our DB team is initiating backup of DB (around 10-11 TB) from one server (WEB-CONTEXT) to another server (PROD-CONTEXT), it takes a week or sometime it tak