I get a network error during installation

Cannot read file C:\windows\installer\AppleSoftwareUpdate.msi

Hmm. Sorry I must not be making my question clear. I've already downloaded and run the setup package. All of the software is already installed.
I'm having trouble establishing a wireless connection to the printer. When I try to do that I get this:
Any ideas on what to do here? The driver file doesn't exist in any of the Windows directories I was directed to look in.
In fact, I don't even know if it should be in any of those directories. The advice I was following there was with regard to a Windows XP issue. And I'm on Windows 8.1.

Similar Messages

  • I can't update, I keep getting a "Fatal error during installation.  Error 1603" message

    I can't update, I keep getting a "Fatal error during installation.  Error 1603" message

    ireeeeen wrote:
    Oh it's from photoshop elements 5.0
    hopefully you can answer my question
    You'll have more luck in the Elements forum:
    http://forums.adobe.com/community/photoshop_elements

  • TS5376 When I try to remove "Apple Mobile Device Support" I get a "Fatal error during installation" message.  I have windows XP

    The program will not start because MSVCR80.dll is missing.  I am trying to unistall I tunes and then reinstall it because the latest upgrade did not work.  I was able to remove "Itunes" and "apple Software update' but when I tried to remove "Apple mobile device support" I get a "fatal error during installation" message.

    First try a repair install of Apple Mobile Device Support. If that goes through successfully, restart the PC and see if you can now uninstall Apple Mobile Device Support.
    If the Repair install doesn't help, try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
    Fix problems with programs that can't be installed or uninstalled

  • Network error during installation of Itunes.

    hey
    I am try install Itunes, but it comes with "network failure with Itunes.MSI".
    Also If i try to open itunes on its own it ask for it and browse to it. Then it say that it is invalid.
    What am i doing wrong? Please help me.

    With that one, download and install the Windows Installer CleanUp utility from Microsoft:
    http://support.microsoft.com/kb/290301
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp, restart the PC, and try another iTunes install. Does it go through properly this time?

  • PhotoSmart C6280 - Fatal Error During Installation

    I have Win 7 (64 bit) system and cannot install software for my C6280 All-In-One Printer.  I keep getting a "Fatal Error During Installation" message and then the software tries to uninstall.  During this process a reboot is required and then the software tries to install again and then fails.  I'm in a never ending circle of install-uninstall-install-uninstall........
    How do I get out of this?  I want to completely uninstall all software associated with this printer and then start from the beginning.
    The issue that brought about this situation was that I was getting the following message at bootup time:
              "There was a problem starting C:\users\Myron\AppData\Local\IsolatedStorage\HP\zelqof.dll
               The specified module could not be found."
    I am assuming that the missing module would get installed if I re-install all of the associated software with the printer as this is the ONLY printer connected (USB) to this PC.
    This question was solved.
    View Solution.

    Hello BigDog5280,
    Welcome to the HP Forums.
    I see that you are having an issue with a looping uninstall/reinstall of the software and drivers.
    If you have Norton 360 installed, please disable it and reboot the computer.  When the computer is back on, attempt to reinstall with Norton 360 still disabled.
    Here is a link to a document that deals with a Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to download itunes, can someone help me with this?

    I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes.  Can anybody help me to resolve this issue?

    You can try disabling the computer's antivirus and firewall during the download the iTunes installation
    Also try posting in the iTunes forum since it is not an iPod touch problem.

  • Keep getting "Fatal error during installation" messages on install of 7.0 SP1

    Hi,
    I keep getting the following error on installation (dialogue box) on Win2K
    of WLS 7.0.1.0:
    "Fatal error encountered during file installation. The installer will now
    cleanup and exit! [file size error for E:\ ...]"
    While this looks like an obvious file download error I have pulled down the
    full download 3 times and the network download once and it keeps happening.
    Note that when the installer first starts it says it's doing a checksum
    check and this passes OK. The errors only occur during individual file
    installation. What's more is that it occurs at different points in the
    install process (any time between about 20% and 60% completed).
    Weird. Note that I have previously had WLS installed on my system before.
    Any ideas much appreciated.
    regards
    --malcolm

    Hi Malcolm:
    you were getting -- "[file size error for E:\ ...]"
    the installation worked on the C: drive.
    > Yes I have a number of partitions C: thru E: with D: being System part (C:
    > is Win 95 parition with Win2k boot on it too), D: E: are NTFS. E drive has
    > used 10GB and 1.5GB free.
    Since I cannot see your system and explore the used and free space, and I am not a
    Windows 2000 file management expert, I can only speculate on the causes.
    Maybe your E: drive is very fragmented and Windows cannot find enough clusters or chunks
    to let this complete. The Win95 partition is a FAT16 format; the others are NTFS.
    Perhaps there is more free space on C:, or Windows can better get what it needs when
    allocated in smaller portions.
    Where is the "platform701_win32.exe" file when you execute it?
    I am wondering if it is stored on a FAT16 drive.
    Are you using PartitionMagic? Can you give more space to E: or change cluster sizes?
    I asked about the swapfile because I am thinking about areas that grow and shrink, and
    could cause trouble at varying points as you described. So, there are TMP and TEMP ?
    Later,
    Wayne
    Malcolm Robbins wrote:
    "Wayne W. Scott" <[email protected]> wrote in message
    news:[email protected]...
    Malcolm Robbins wrote:
    Wayne,
    are you there? Any ideas?Yes. I didn't see any follow-ups for awhile, then I was very busy at theoffice.
    Your downloaded file is probably okay, but I will compare to one of mine.
    Including yours here for my own reference.
    ====
    file = platform701_win32.exe
    checksum = 3657019252 (as reported by cygwin)
    size = 283,279 KB (win2k) or 290076933 bytes (as reported by cygwin)
    ====
    "Fatal error encountered during file installation. The installer will now
    cleanup and exit! [file size error for E:\ ...]"
    * I'll bet you are running out of space on the E: drive!
    Is E: one of your partitions? How much free space is on it?Yes I have a number of partitions C: thru E: with D: being System part (C:
    is Win 95 parition with Win2k boot on it too), D: E: are NTFS. E drive has
    used 10GB and 1.5GB free.
    Are you telling it to use the E: drive?Yes.
    Can you use C: ?I suppose I could try, if that matters ???!!!
    --- I just tried it and it all worked!!! Why is this? I don't really want
    to keep it on C:
    Where is the Windows swapfile?It's on D:
    Please search your system -- all drives -- for 'registry.xml' and show
    what is found.
    Wayne

  • Error during installation OS 10.8.2 getting restart  and thin black break screen

    error during installation OS 10.8.2 getting restart after apple logo several times and thin black&white crashed screen

    I had this problem too.
    Go to http://support.apple.com/kb/DL1580
    Download the update manually and install. Worked on my MBP15 retina.
    Regards
    Chris

  • HT1338 i reinstall my macbook pro after i try to install application software but i am getting error during installation.

    i reinstall mac os through mac dvd after completing installation  i try to install application through application dvd but its showing error during installation. IPhoto,IDVD ,etc all these software i need to install but getting problem.Please resolve my problem.I checked my hardware test i passed .

    Hi,
    Try cleaning the DVD and try again. It could be that you have a bad disc.
    Open the "Console" application. "Applications -> Utilities" are there any diagnostic messages or error logs, crash reports in the Console window? If a program crashes during the installation, post the error message. The first fifty lines of the crash log should suffice.
    I'm guessing that it could be that certificate expired so the installer package is no longer trusted. You can try setting the date on your Mac back to around the date you bought it and try the installation again. I hope this helps. If not and you may need to request a new DVD.
    Let me know how it goes.

  • 1603 fatal error during installation-L7680 all in one printer

    I continue to get this error because the installation finds newer software and quits.  I have completed the MSI error 1603 solution 16 page paper for windows XP and was unsuccessful.  I then used CCleaner to clean all registry errors, and that still didn't work. 
    Is there a quick fix to get past this error and install the latest scanner software on the HP site?  I can print with this printer, but can not see it on the network nor use the scanner.
    Best regards,
    Ed

    Hello @charleydog 
    Welcome to the forums
    I read your post about the Fatal Error 1935 you're receiving when installing your Photosmart C4280 on your Windows 8.1 system.
    I have located a specific document for this certain error you are seeing. I would suggest checking out the guide and trying out all of the steps it recommends to resolve the Fatal Error issue.
    Fatal Error 'Error 1935. Fatal error during installation.' (MSI Error 1935) Displays During HP Softw...
    I hope this helps you!
    Have a terrific weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HT201210 When I try to do a software upgrade from 4 to 6 on my ipad I get a Network error message.  i have full internet access. Any ideas?

    I am trying to upgrade my ipad ios 4 to IOS 6 or above. I  get a network error code saying the ipad upgrade server cannot be contacted. I do have full internet access on a high speed connection. Any suggestions?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
    Go into the iPad's Settings.
    Locate and tap "General" from the menu on the left.
    The second option from the top is "Software Update". Tap this to move into the update settings.
    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • Adobe Illustrator CS3: Fatal error during installation

    Hello,
    I just bought the AI CS3. It installed OK on my friend's laptop (windows). However, when I clicked the big button in the installation:
    "Install Adobe Illustrator CS3"
    A window showed:
    Initializing Adobe Illustrator...
    Then I got a message:
    "Setup has encountered an error and cannot continue. Contact Adobe customer Support for assistance. Fatal error during installation".
    I've tried several times. My computer meets all the requirements (it's a really new and faster PC). And there's no old versions of AI on it yet.
    Can anyone help? Thanks!!!

    Do you have any other Adobe products on your computer? When I installed CS3 on my Mac, I kept getting failures. After contacting Adobe, they told me I had to delete ALL other Adobe products -- including Flash and Adobe Reader. Plus, I had to do searches and delete any support files associated with them. It took hours!

  • Error during installation of IDES 4.7 on Windows 2003 Server OS

    Hi....
    I'm getting the following error during the installation of the IDES 4.7.
    Request someone to guide me.
    The error part of the log file is produced below
    Thanks
    Ashwin
    See 'D:\oracle\ora92/bin/lsnrctl stat' output in 'D:\SAPinst ORACLE KERNEL\lsnrctl.log'.
    INFO 2007-07-05 23:24:57
    'D:\oracle\ora92/bin/lsnrctl stat' returned with '3'.
    INFO 2007-07-05 23:24:57
    Creating file D:\SAPinst ORACLE KERNEL\lsnrctl.log.
    INFO 2007-07-05 23:25:00
    See 'D:\oracle\ora92/bin/lsnrctl start' output in 'D:\SAPinst ORACLE KERNEL\lsnrctl.log'.
    INFO 2007-07-05 23:25:00
    'D:\oracle\ora92/bin/lsnrctl start' returned with '0'.
    INFO 2007-07-05 23:25:00
    Copying file D:/sap47ee/kernel/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
    INFO 2007-07-05 23:25:00
    Creating file D:\SAPinst ORACLE KERNEL\oradbusr.sql.
    INFO 2007-07-05 23:25:01
    Changed working directory to D:\SAPinst ORACLE KERNEL.
    INFO 2007-07-05 23:25:05
    Changed working directory to D:\SAPinst ORACLE KERNEL.
    ERROR 2007-07-05 23:25:10
    CJS-00084  SQL Statement or Script failed. Error Message: Executable D:\oracle\ora92/bin/sqlplus.exe returns 959.
    ERROR 2007-07-05 23:25:10
    FJS-00012  Error when executing script.
    INFO 2007-07-05 23:26:23
    Changed working directory to D:\SAPinst ORACLE KERNEL.
    INFO 2007-07-05 23:26:28
    Changed working directory to D:\SAPinst ORACLE KERNEL.
    ERROR 2007-07-05 23:26:33
    CJS-00084  SQL Statement or Script failed. Error Message: Executable D:\oracle\ora92/bin/sqlplus.exe returns 959.
    ERROR 2007-07-05 23:26:33
    FJS-00012  Error when executing script.

    this is the content of file oradbusr.log
    what conclusion can be drawn out of it???
    old   3:    if substr(upper('&&1'),1,5) = 'SAPR3' then
    new   3:    if substr(upper('SAPR3S'),1,5) = 'SAPR3' then
    old   6:           if upper('&&2') = 'NT' then
    new   6:           if upper('NT') = 'NT' then
    old  13:                :sDomain := upper('&&3');
    new  13:                :sDomain := upper('INDIA');
    old  17:           :sSchema := upper('&&1');
    new  17:           :sSchema := upper('SAPR3S');
    old  18:           if upper('&&2') = 'NT' then
    new  18:           if upper('NT') = 'NT' then
    old  25:                :sDomain := upper('&&3');
    new  25:                :sDomain := upper('INDIA');
    using following Parameters:                                                    
    .  Oracle SID:                         R3S                                     
    .  Oracle Version:                     9.2.0.2.1                               
    .  Parametervalue os_authent_prefix:   OPS$                                    
    .  Database User (Schema):             SAPR3                                   
    .  SAP R/3 Administrator:              OPS$INDIA\R3SADM                        
    .  SAP R/3 Serviceuser:                OPS$INDIA\SAPSERVICER3S                 
    unable to assign default tablespace to user: SAPR3                             
    begin
    ERROR at line 1:
    ORA-00959: tablespace 'PSAPUSER1D' does not exist
    ORA-06512: at line 90

  • Itunes: Fatal Error During Installation (it wont download at all) HELP!

    Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
    +*Preparing to install...*+
    Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
    Then another window pops up saying:
    *+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
    *+Verify that you have access to that directory.+*
    and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
    so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
    *+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
    +*Verify that you have access to that directory.*+
    Then after this i went to the folder
    +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
    and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
    WHAT DO I DO?!?!? please can someone help me
    The details for my computer are:
    Microsoft Windows XP
    Professional Version 2002
    Service Pack 2

    if it helps at all...
    I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
    and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
    ...is there any possible way that anybody can help me out with this.
    any help that anyone can offer is very greatly appreciated,
    Please & Thank You.

  • Fatal error during installation

    I have been attempting to update my version of Boot Camp from 2.1 to 2.2. I have tried on numerous occasions with Apple Software Update but it never installs when the computer restarts. I have Vista 32bit installed on the partition. I tried to update with my Snow Leopard disk to 3.0 but it says the installer encountered errors before Boot Camp could be configured. It also does this with my Leopard disk. As a last resort I tried to repair the Boot Camp Services from the Windows Vista control panel and I get Fatal Error During Installation. Any ideas?
    Thanks,
    tuvixcrc

    Hi,
    Since you only give one of error log and the Error 0x80070643 code is a common error, we need more information to diagnose the problem. Before you collect the logs, you should follow up these steps to install Visual Studio:
    1. Re-download the Visual studio from Microsoft official site here:
    http://www.visualstudio.com/downloads/download-visual-studio-vs
    After download you should use File Checksum Integrity Verifier tool to verify the integrity of your download. If the values don't match, your download may be corrupted and you should download the file again:
    Refer to the below page to know checksum detailed number:
    http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx#
    Refer to
    Download the Microsoft File Checksum Integrity Verifier to know how to check the checksum hash value.
    2. Disable your Anti-Virus or Anti-Spyware software and be sure that your OS has been "patched" up - Update your computer (Windows) before install the VS.
    3. Clean your %temp% folder and run the installer with Administrator permission.
    Look the links to get more information:
    http://blogs.msdn.com/b/msdnforum/archive/2010/03/06/visual-studio-and-net-framework-installation-tips.aspx
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/60f71a54-506e-4c70-be98-e993ce6d1ddf/visual-studio-installation-tips?forum=vssetup
    If that still cannot go on the VS installation, please use
    http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
    https://Onedrive.live.com/ and share the link here.
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Maybe you are looking for