I get a Software License Agreement screen that is blank and won't let me choose "Accept", so how do I fix this?

This happens when I open Acrobat.

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Similar Messages

  • My app store will not let me update or get new apps which are all free and it keeps telling me to enter my billing info and when i do that it sayd my security code ain't right and won't let it go through..how do i fix this??

    my app store will not let me update or get any apps..they keep asking me for my billing info through my card and i enter my info and it says the security code is wrong when i know its right...how can i fix this? whats the problem?

    Select None for payment method >  iTunes Store: Changing account information
    If None is not available > Why can’t I select None when I edit my payment information?
    Yes, you can redeem an iTunes gift card for current purchases.
    How to Redeem iTunes Gift Cards and content codes
    And you can check the balance of a redeemed card >  Account Home - Apple Store

  • HT1689 I go to click on the buy button and then it half disappears and won't let me download anymore. How do I fix that?

    I go to click on the buy button and then it half disappears and won't let me download anymore. How do I fix that?

    If you have a 1G iPod or iOS 3.x that seems to be a problem that Apple created when they updated their website. No know solution yet except to download on your computer and sync.

  • My 2nd generation iPod nano screen is showing lines and I cannot see the whole menu. How can I fix this problem?

    I believe that my wife disconnected the iPod nano (2nd Gen.) improperly and now the screen has a whole bunch of lines. I can see the screens moving when I move to the next screen. But it's just lines. Any help would be greatly appreciated.

    well unfortunatley your warranty is over so the device is not covered,  BUT sounds like you have interupting signals being sent from a stuck home button constantly being pressed and maybe even a digitizer problem (the touch screen).  You can try to restore your ipod to your computer to see if it might be some kind of software related issue.  Just restore to the last sync you have on iTunes.  But FIRST...I would try to Reset your ipod.
    Go to Settings>General>Reset> Reset all settings.

  • I'm getting the message, "Your Apple ID has been disabled," when I try to make a purchase. I reset my password and updated it in my account, but it still won't let me purchase anything. How can I fix this?

    I'm getting the message, "Your Apple ID has been disabled," when I try to make a purchase. I reset my password as directed (several times) and updated it in my account, but I'm still getting the same message. What do I do?

    You need to contact support:
    http://www.apple.com/support/itunes/ww/
    Enter country and select bottom contact support link on the left on the next page that loads.
    AC

  • Keep getting the Software License Agreement

    I have a payed license for using all of the Adobe CC, but although I installed everything correctly I'm keep on getting the Software License Agreement window with the accept-button on it once in a while. Although I accepted it a million times now it keeps on coming back. Not only with illustrator, but also with photoshop, AfterFX and so on.
    Also sometimes I have to re-login to the cloud to use the Adobe CC. Is that normal? I was hoping this was only needed once, but once in a while I have to login again to use Adobe CC update-panel.
    It's getting really annoying. Anybody got the same problem? How did you solve this?

    Martino,
    I believe this is one for this forum,
    http://forums.adobe.com/community/download_install_setup
    or for Customer Care (just go straight to I Still Need Help),
    http://helpx.adobe.com/contact.html?product=illustrator&topic=download ing-installing-and-setting-up

  • Sign in required and Adobe Software License Agreement screens appear

    Hi
    Everytime I launch the Adove CC Software (Indesign, Photoshop, Illustrator....) I have to sign in and then the Adobe Software License Agreement screen appears. Are these two screens supposed to appear everytime I launch the software (it didn't used to do this). It's very frustrating. Any help would be welcome.
    Regards
    Dan

    Sign in or activation errors
    Mylenium

  • Unable to download Error getting License. License Server Communication Problem: E_ACT_NOT_READY.  Cannot open ebooks on my Adobe DE.  How do I fix this?

    Unable to download Error getting License. License Server Communication Problem: E_ACT_NOT_READY.  Cannot open ebooks on my Adobe DE.  How do I fix this?

    I had the exact same problem & this worked for me. All I needed was the first step. Good luck!!!! (copied from another thread):
    "Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
    Uninstalling and reinstalling does not help, and indeed installation can even trigger this state.
    Unfortunately, it often then gives misleading error messages about what is wrong.
    A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
    Another is  "E_AUTH_NOT_READY"
    This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
    Restart ADE, and then reauthorize with your (old) Adobe ID.
    In extreme cases on the mac, the following extra step has helped some people.  Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0

  • I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition.  I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

    I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition.  I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

    No easy fix for a few reasons:
    1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
    2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
    I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
    Win7 x64 booting natively via EFI (no bios emulation)
    Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
    My recomendations:
    1) Install on a second smaller hard-drive; or
    2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
    3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

  • I am getting an error message that indicates /system/library/extensions/OnUSBMassStorage.kext was installed improperly.  How do I fix this?

    I am getting an error message that indicates /system/library/extensions/OnUSBMassStorage.kext was installed improperly.  How do I fix this?

    First off, you are running an intel not a PPC.
    Second have you attached a USB external drive to your computer?  Remove all peripherals and see if the message goes away.  Then reattach each peripheral one by one to weed out the problematic one.

  • When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

    When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

    Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • I just deleted and restored iTunes because I had 4 or 5 of each song. After all that I STILL HAVE 4 or 5 of every song. HOW DO I FIX THIS?

    I just deleted and restored iTunes because I had 4 or 5 of each song. After all that I STILL HAVE 4 or 5 of every song. HOW DO I FIX THIS? Or do I just stop using iTunes?

    Since this a potentially drastic approach I will remind you that at this point you ought to have a complete backup of your library in case things get worse rather than better...
    Select the Music source, select all (ctrl-a), delete, DO NOT SEND FILES TO THE TRASH!
    Repeat with other media sources if you wish.
    Import your media, get it organized, backup again.
    I can recall if I've sent you in the direction of this information yet...
    Here are the typical layouts for the iTunes folders:
    In the layout above, with the media folder (everything in the red box) inside the library folder, the library is considered to be portable. A portable library can be moved from one path to another without breaking the links between the library and the media and being self-contained is much easier to backup
    ... but if you are going to start over I'd recommend you work with iTunes rather than fighting it. If you want your own folder structure for your media (I know I do, but generally recommend people don't because it is less hassle) then turn off the option under Edit > Preferences > Advanced to Keep the iTunes Media folder organized, but place your structure somewhere inside the iTunes media folder. That way you get the advantages mentioned above and are much less likely to create duplicates by accident again in future.
    tt2

  • Getting error message setting up contacts "your setup cannot start because the iCloud server has stopped responding"   How can I fix this?

    Trying to set up contacts on Windows7 PC. Get error message that "setup cannot start because iCloud server has stopped responding.  How can I fix this?

    Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it.    Found this in another post and it worked great.
    Solution:
    Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
    By WaKaDo

  • I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

    I am trying to get my iPad to print from hp air printer and it only prints on photo paper. How do I fix it to print on paper. I already put setting to copy on printer but it prints blank.

    Thank you everyone. I figured it out. I thought that you can use regular paper to print pictures from photos on Ipad. This is not possible. I was able to use regular print paper to print from my mail. My problem is solved!! 

  • TS1717 error message that iTunes can't start because mcvcr80.dll is missing.  How do I fix this?

    after installing itunes update on windows 7 pc, get error message that program can't start because mcvcr80.dll is missing.  How do I fix this?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for