I get a weird error message when I boot up the computer

Every once in a while when I boot up my computer it gives me an error message that says:
"Your computer’s clock is set to a date before March 24th 2001. This may cause some applications to behave erratically."
But my clock is not set to an old date/time. And when I go into the date/time settings to check, they are always set correctly. Why am I getting this message??

it could be logic board problem (just a guess at this point and not a conclusion), unless some software setting changes date/time as was suggested.
logic board is the main electronic board inside, containing processor, video chip etc., it also includes the chip controlling real time and date.
it is possible that the time chip is failing for some reason and it can't be replaced on it's own - the whole board may need to be replaced.
if the iBook is out of warranty it will be to expensive and probably not worthwhile just for the clock problem.
if it's in warranty (1 year from purchase date or 3 years with AppleCare warranty) any authorized service provider will get it fixed:
http://www.apple.com/buy/locator/service.html
you can look up the warranty here by entering serial number for the iBook where it says "About Your Support Coverage":
http://www.apple.com/support/
also someone may have other suggestions on software causes.

Similar Messages

  • I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

    I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms  are appreciated.

    Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

  • I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

    I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
    Thanks for your help in advance....

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • Get these two error messages when I run the iTunes exe file:  Error 2 and Error 2 (Windows error 2).  Both say Apple Application Support is required.  Uninstalled and tried to install again several times.  Using Windows 7 64 bit on laptop.

    Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit.  Get these two error messages when I run the iTunes exe file:  Error 2 and Error 2 (Windows error 2).  Both say Apple Application Support was not found.  Can anyone tell me why this is happening?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • On My Mac Pro Getting an unknown error message when trying to update apps

    On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

    Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
    Settings>Store>Apple ID - tap your ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Sign in again -Settings>Store>Apple ID - sign in.
    If that doesn't work either, reset your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error.

    I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error. (-50). my icloud drive was stuck in an upgrade cycle, but i've stopped that and still get the error message.

    I restarted itunes and tried again (based on a similar question/solution from 2012).
    I don't get the error message anymore, but it's really sort of odd that after step one of sync, it looks as if sync stopped, and then all of a sudden you see step 4 of sync.
    Also before the upgrade I had 7+ gigs of space free and after the upgrade I have 10 gigs free. seems like something is amiss, but it's not like I have anyway of determining that.

  • A get an internal error message when i try to install adobe reader

    I get an internal error message when I try to install Adobe reader.  I also get error message 1606 could not access net location %APPDATA%\.  How can I fix this?

    See this article http://support.microsoft.com/kb/886549/ regarding the corrupted %APPDATA% environment variable.
    If you require further help, please specify your Windows version.

  • I keep getting an error message when trying to download the new security software IOS 7.0.6?

    I keep getting an error message when trying to download the new security software IOS 7.0.6?

    what error message?

  • TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

    I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

    Did you try this:
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    Also see:
    HT4061 error message 3014.: Apple Support Communities

  • Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

  • I get a download error message when I try to open my apps tab on my home network

    I get a download error message when I try to open my apps tab on my home network. But I am able to sign in to my account on the web. Do you know how to fix this?

    This is an open forum, not Adobe support... you need Adobe support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • TS1394 im getting an error message when trying to install the snow leopard application cd 2. need  help.

    im getting an error message when trying to install the application cd on my Imac os x 10.6.4   what can I do to solve this problem?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

    I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

    OK, I tried a few things, and I do not understand the results.
    1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
    2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
    3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
    4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
    My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

  • Very often I get a contact error message when I try to use my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol.

    Very often I get a contact error message when I try to us my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol..

    See this support article - https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

Maybe you are looking for

  • How do I delete my iCloud account from Apple?

    I have an iCloud account which I never used.  Wanted to delete it to minimize the potential hazardous of being hacked.

  • Trouble connecting Macbook Air and iTunes with Apple TV

    When I tried to connect my iTunes to my Apple TV,this message showed 'An error occurred while connecting to the AirPlay device "Apple TV". An unknown error occurred (-15000)'. I just changed my iTunes ID. I am using Macbook Air 13" mid 2011 OS X Lion

  • Problem in structure mapping

    hello friends, I am adding 4 fields to std program RFITEMAR this is for customer line item. iam fetching this 4 fiedls from bset table. i have copied the std structure into zstructure. and the same iam giving in my prog but iam gettting a dump saying

  • Can I group list view by folders then files (like in Windows)

    I'm brand new to Mac (was a Windows user since 1993) and so now I'm starting over as a NOOB! One thing that's driving me crazy is that I am used to viewing my list of files and folders with the folders grouped together alphabetically (or chronologica

  • Photoshop "step backward" maintains current layer selection?

    How about make Photoshop "step backward" command maintain current layer selection? So that when using the "step backward" to undo something it doesn't select a differnt layer. The current "step backward" layer change issue is annoying.