I get a white screen with a grey flashing folder icon with a question mark in it when i try to start up my i mac, what's happening?

A few days ago my i mac when into grey screen; there were a few options for starting up, restoring etc i tried all of them to the extent possible but didn't work. Then i decided to unplug my external backup drive in case it may be erased or info lost in this process and now all i get when i turn it on is a white screen with a flashing folder and question mark. Any ideas?

That indicates the computer is having difficulty finding the startup volume. Your internal HD may have failed or the system may have "forgotten" where it is. If you are using Lion or later (10.7.x or later) then restart in the Recovery Partition and choose the startup disk. Before doing anything carefully read and follow Apple's instructions in:
A flashing question mark or globe appears when you start your Mac

Similar Messages

At start up I get a white screen then eventually a blinking folder icon with a question mark in the middle

Help! As of today, my iMac will not boot up. When I turn it on I get a blank white screen then, after about a minute, a blinking folder icon with a question mark in the middle.

Find your original install disk, insert it and re-boot holding the "C" key during startup. It will take longer but should boot. Then you need to select Disk Utilityfrom the Menu Bar. Do a Repair Disk on your hard drive. When it finishes re-boot normally.

I restarted my computer, but the screen only shows a flashing folder icon with a question mark. What to do?

I restarted my computer, but the screen only shows a flashing folder icon with a question mark. What to do?

It means that the system boot directory can't be found.
See this support article for suggested actions
Also see this discussion.

MacBook won't start - shows flashing folder icon with question mark

When I attempted a Spotlight search, my MacBook froze. I shut it down, and when I start again I get the sound, the blue screen, and then a flashing folder icon with a question mark. I tried starting with Option pressed down; didn't work, and now I don't even get the flashing folder icon, just the blue screen. Any suggestions?

The flashing folder with question mark means the computer can't find a working OS on the computer. This may mean your hard drive has failed.
Try holding the Shift key while starting up the machine. This puts the machine into Safe Mode.
If you have your install discs, insert Install Disc 1 and start up the computer while holding down the C key. When the Installer has loaded, choose a language. From the Utilities menu, choose *Disk Utility*. Does your hard drive show up here? If so, click on its icon (the one with manufacturer name & capacity, NOT "Macintosh HD"), and then click on the *Repair Disk* button.
If booting in Safe mode doesn't help or you don't have your install discs, you need to bring the computer to an Apple store and have the folks there look. If Disk Utility doesn't list your hard drive, it has very likely failed and will need to be replaced. If your machine is out of warranty, you're better off replacing it yourself, as it's very easy to do.
~Lyssa

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup.

When I turn on my MacBook Pro I get a grey screen with a folder icon and a question mark. I can't the computer to boot up.

What do I do when I power up the computer and get a grey screen with a folder icon and a question mark?

vickyfromosseo wrote:
What do I do when I power up the computer and get a grey screen with a folder icon and a question mark?
Read this: A flashing question mark or globe appears when you start your Mac

What does a white screen with a flashing folder icon with a question mark in it mean?, what does a white screen with a flashing folder icon with a question mark in it mean?

My computer seemed locked up, nothing would open. I had to force quiy everthing. I tried to normally shut it down and it wouldnt shut down. I held the on off power switch. When I tried to turn it back on It stays tuck on the white screen with a flashing folder icon with a question mark in it . Has my hard drive gone bad?

Reboot the computer holding the option key down, you will get a selection of your OS X internal boot drive or the perhaps the disk you stuck in.
You can choose what you can boot into.
If it's the hard drive and it's there, then select that and head to System Preferences and change the startup disk to the hard drive, you shoudl be fine.
If only to disk, then select that and run Disk Utility > Repair, If your drive doesn't appear on the left, it's likely dead.
Repair the drive and reboot holding the Shift key down, see if that fixes things some more and reboot again normally.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

15" MacbWhite screen with a blinking file folder icon with a question mark on it.

15" Macbook. When i power on all I get is white screen with a blinking file folder icon with a question mark on it.N

You may have a bad hard drive. The flashing folder with the ? indicates that the system cannot find your hard drive. Use the installation disc that came with your machine. Insert it into the disc drive and restart the machine holding down the "C" key . When the restart shows the Apple screen you can release the C keyWhen the installation screen appears, click on the utilities button. Does the left side of the disc utilities screen show your HD? If not, then your HD is bad or it could be a loose connection. ifixit.com has a good tutorial on how to replace the HF in the Macbook. Follow the instructions to remove your HD. Reinstall your HD and boot up your machine to see if it recognizes your HD. If it does't, you probably will need to replace your HD>
Is your machine still under warranty? If so, take it to your nearest Apple Store for repairs as the repairs will be covered under your warranty. If you bought AppleCare when you bought your computer your warranty is for three years. If you didn't buy the Apple Care, then your warranty is only good for one year from the date of purchase.

My macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?

my macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?

Try this.
Erase and Reinstall OS X
Note: This will delete all data on the disk. Back up important files before continuing.
Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
Press the Power Button to turn on the computer.
Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads.
Select Disk Utility and then choose Continue.
Select your startup disk (Macintosh HD by default) from the left.
Select the Erase tab.
Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
After the disk is erased, choose Disk Utility > Quit Disk Utility.
Select Reinstall OS X and then choose Continue.
Follow the instructions.
I hope I solved your question.
Austin

Installed hard drive in bay 2 now get flashing folder icon with ? mark

Mac Pro 1.1, OS x 10.7 - installed storage hard drive in bay 2 now get flashing folder icon with ? mark

found the answer - hold down opt/alt key, reboot, choose drive with os installed. it worked.

Help ! Flashing folder icon with question mark when starting up

Hi, I have tried to restore my macbook pro 15 (2012 model with Yosemite OS X) to factory settings and wipe out the hard drive but on restarting it I now just get a blank screen with a flashing folder icon with a question mark on it. Any help/advice anyone I would be very grateful for ! Thanks, Mark

Something didn't install properly.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

What does a flashing folder icon with a "?" inside mean?

What does a flashing folder icon with a "?" inside mean?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Startup problem flashing folder icon with a question mark

Hello All,
My macbook (Intel Core Duo) suddenly stopped working. Ater I push the powerbutton, I hear a clicking noise(about 1/second) coming it seems, from the cd-rom drive. Then after about 20 seconds, the clicking noise goes away and I get a flashing folder icon with a question mark (?) in it. And it just sits there for ever. I tried all the troubleshooting tricks mentioned in the user's guide, like taking out the battery and pressing the power key for 5 seconds, pressing command and control keys while pushing the power button e.t.c. I also ran the Apple Hardware Test program and it mentioned there was no problem with hardware. When I try to install the operating system with Mac OS X CD1, I go through the steps and there is no destination volume (my Macintosh HD is not seen) to install on. I appreciate any help on this matter. Thanks a bunch.

Chances are if you do not see your MacBook's HD then your HD has crashed and you will need to contact Apple (or take to an Apple Store or reseller) to have it replaced.
I hope it's still under warranty and I hope you have been backing up to another device.
This happened to me about a month ago and Apple replaced my HD and I had back ups (although I wasn't backing up religiously) so I didn't loose everything. When I picked up my MacBook with it's new HD, I also bought a new firewire external drive and back up nightly.
Good Luck - Call Apple.

Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode

I get a white screen with a grey flashing folder icon with a question mark in it when i try to start up my i mac, what's happening?

Similar Messages

Maybe you are looking for