I get an error at 99% of the burn when trying burn avchd movie to dvd

I have had premiere elements 10 for a few months and starting about a week ago I have been getting an error while trying to burn video to a dvd disc in avchd format.
I have used several different discs but the error always occurs at 99% of the burn stage. The buring just stops no matter how long I wait. I can still burn avchd disc using the video browser program that came with my cannon vixia hd camera.I don't have any problems burning video to dvd in standard format. I am a novice at this judging by what I have read in the forums. My computer is relatively new hp running windows 7 premium home 64 bit. To the best of my knowledge nothing has changed on the computer,
and I have plenty of memory.

David,
Thank you for that information.
First two thoughts:
What brand and type of blank media are you using?
Have you checked for updates for your multi-drive/burner's firmware?
Both of those can impact the success of a burn.
As a test, I would Burn to Folder, then use a utility, such as ImgBurn (free and great), to see if this is a media, burner or perhaps PrE issue.
Good luck, and please let us know a bit more,
Hunt

Similar Messages

Getting "an error occurred while preparing the installation" when trying to install Yosemite

I have verified i meet all the requirements to upgrade my imac from snow leopard to yosemite. i have verified date is correct, and reset the NVRAM by holding Command+Option+P+R while rebooting. Keep getting same error "An error occurred while preparing the installation. Try running this application again." Any other suggestions would be greatly appreciated.
Hardware Overview:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.29f1

Try booting into the Safe Mode and installing Yosemite there.
Safe Mode - About
Safe Mode

TS3899 getting an error, "unable to connect to server" when trying to access his yahoo email account. no different user name/wifi is off.

getting an error, "unable to connect to server" when trying to access yahoo email account. I did not change my password, but now everytime I try to access my email from my IPhone 4s, I get the error.

Try the Yahoo mail app.

I keep getting error "Unable to join the network" when trying to connect to wifi

Help! I have tried to connect to multiple networks and keep getting the same error message. I have reset my network settings and wiped the ipod clean restored. Any ideas?

No.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

AFter upgrading to FF7, I get certificate errors & only see text & broken links when trying to reach the FF Addons website. How can I correct this?

I am currently at work, & this issue is occuring on my home computer--which I cannot reach at the moment.

I now find that even when I attempt to visit the FF Addon page from work, using either IE or FF 6, gives me the same problems. & the system date & time on my work computer is correct.

HT201250 I get an error message: "Could not unmount disc" when trying to set up a new external backup drive

Trying to back up my mac to update the OS. Just bought a new external drive, and when launching thru time machine I get the "could not unmount disc" error. The .dmg (macinstall) quit's unexpectedly too, so I can't launch it either way.

Hi, what format is it? If already Mac format, likely Spotlight is holding it open, if not you need to format it...
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html

I am getting an error in 4.0.0.12 when trying to create a data miner workflow after db upgrade, any suggestions?

java.sql.SQLException: ORA-20999: Error in WF_CREATE:
ORA-00600: internal error code, arguments: [kzxcInitLoadLocal-7], [64131], [ORA-64131: XMLIndex Metadata: failure during the looking up of the dictionary
ORA-30966: error detected in the XML Index layer
ORA-31011: XML parsing failed
ORA-06512: at "SYS.XMLTYPE", line 310
ORA-06512: at "ODMRSYS.ODMR_WORKFLOW_SEC", line 198
ORA-06512: at "ODMRSYS.ODMR_WORKFLOW_SEC", line 2039
ORA-06512: at "ODMRSYS.ODMR_WORKFLOW", line 62
ORA-06512: at "ODMRSYS.ODMR_WORKFLOW", line 72
ORA-06512: at line 1
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:445)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:450)
    at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)
    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
    at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:204)
    at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1041)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1329)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3584)
    at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3665)
    at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4739)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1352)
    at oracle.dmt.dataminer.generated.server.OdmrWorkflow.wfCreate(OdmrWorkflow.java:376)
    at oracle.dmt.dataminer.repository.Workflow.create(Workflow.java:364)
    at oracle.dmt.dataminer.wizard.workflow.WorkflowDialogState.finishCreate(WorkflowDialogState.java:96)
Thanks

Thanks for the quick response and as you stated it appears to be an issues with the XML schema for XMLDB.
The db server instance is on an SLC host deployed by a DEV build:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE    11.2.0.1.0    Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I have tried both SQL Dev 3.2.20.09 and 4.0.0.12 on separate db hosts and in both case I had to modify the sqldev/dataminer/scripts/validateODMRSYS.sql so the upgrade would "validate" and finish. The cursor in validateODMRSYS.sql originally looked for "INVALID" objects and changes to it caused it to report all objecst invalid which calls RAISE_APPLICATION_ERROR(...) then fails to validate, see cursor snippet below. After correcting the cursor and running the upgrade upon double-click or ODM connection it is successful. I have multiple log files of the process if needed.
DECLARE
w_object_type varchar2(200);
w_object_name varchar2(200);
w_owner varchar2(200);
w_status varchar2(50);
countObjects integer := 0;
--SELECT owner,
--       object_type,
--       object_name,
--       status
--FROM   dba_objects
--WHERE status = 'INVALID' AND
--       owner = 'ODMRSYS'
--ORDER BY owner, object_type, object_name
cursor objects_cursor is
SELECT owner,
       object_type,
       object_name,
       status
FROM   dba_objects
WHERE --status = 'INVALID' AND
       owner = 'ODMRSYS'
ORDER BY owner, object_type, object_name;
Thanks!

HT201210 Getting an error code (code 50 I think)when trying to sych my updated iPhone 5s to updated iTunes.

Getting error code when synching with iTunes. Never had a problem before updating iOS and my Mac.

iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes

I am getting an error code of 1150 from itunes when trying to sync and back up my ipad

Need help can not sync or back up ipad4 to computer.

Settings > General > Restrictions > Install Apps = ON

Grey circle with cross in the middle when trying to boot from Tiger DVD

When I try to boot from the DVD that installs Tiger, it get the Apple logo and spinning wheel as usual when booting a Mac OS. Then the Apple logo turns into a grey circle with a cross in the middle, signifying "no"! I haven't locked my firmware, but could it be locked? I got the computer from Apple when my original G5 died (it was a lemon). Did Apple lock the firmware???
The OS on my Macintosh HD is Leopard.

So what specific model is this iMac? Is it a G5? Or is it an Intel iMac?
If it is a G5 you have posted in the wrong forum, this is the Intel forum. A G5 is not an Intel Mac, it has the IBM PowerPC CPU.
If this is an Intel, which Intel model is it? Did it come with Mac OS X Tiger installed on it? If it did not come with Tiger, if it came with Leopard, you cannot put Tiger on it.
Dah•veed

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.

I get "an error has occurred in the script on this page" it comes up for no reason on Firefox and I can't remove the message, it then goes away on it's own after 3 minutes? how do I prevent this message coming up? I have Windows 7.
I can work the screen behind the message which stays in the centre of my screen.

Windows version is...?
What pages are giving you problems? [post links to same]
Are you getting the script errors only when attempting to print or...?
Has your printer's manufacturer confirmed that your currently installed printer software is IE11-compatible (yet)?
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

I get an error at 99% of the burn when trying burn avchd movie to dvd

Similar Messages

Maybe you are looking for