I get an error mess when trying to complete backup "The backup disk image "/Volumes Time Capsul MacBook Pro.sparsebundle" could not be accessed (error -1).
When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?
I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.
Similar Messages
-
I have two Imacs backing up to a time capsule and I keep getting this error on one of them The backup disk image “/Volumes/Data/APPLE’s iMac.sparsebundle” could not be accessed (error -1). How do I resolve this?
See #C17 in Time Machine -- Troubleshooting by Pondini, our resident expert on Time Machine.
http://pondini.org/TM/Troubleshooting.html -
I recently obtained the 3 TB time capsule and after setting it up I have backed up using time machine and after a few days it gives this error. I erased the drive and started over but the same thing happened. I do not see the error message that I get listed in the articles. Any ideas?
Error message - The backup disk image “/Volumes/Data/Ence’s iMac.sparsebundle” could not be accessed (error -1).The best "articles" by far are those provided by Time Capsule and Time Machine guru Pondini.
He's the guy that Apple calls when they can't figure things out.
Check out # C17 in Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html
Other good stuff you should have:
Time Machine - Frequently Asked Questions http://pondini.org/TM/FAQ.html
Using Time Machine with a Time Capsule http://pondini.org/TM/Time_Capsule.html -
Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
AnthonyTry this Discussion...
https://discussions.apple.com/message/18783684#18783684 -
My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?
Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html -
Time Machine could not complete the backup.
The backup disk image "/Volumes/Data/Name's iMacsparsebundle" could not be accessed (error -1 )I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked! -
When trying to use Time Capsule on my passport I get this message
The backup disk image “/Volumes/My Passport/EDS MAC.sparsebundle” could not be created (error 1).That should be a C9 or C17 error.. see
http://pondini.org/TM/Troubleshooting.html
Try rebooting everything.. as something has lost connection.. perhaps.
Make sure the disk is actually available in finder.. and try mounting it. -
HT3546 MacBook Pro.sparsebundle" could not be accessed (error -1).
When i try to backup my Time Capsul I get the error (MacBook Pro.sparsebundle” could not be accessed (error -1).)
please help my how I solv this problame?
Mrityunjoy BiswasI had this problem, and found that changing the name of my Time Capsule's hard drive fixed it.
You'll need to use Airport Utility to connect to your Time Capsule. My Time Capsule drive was named "Time Capsule HD." I renamed it to "Data," and that fixed the problem. -
I got this error while my mac was backing up to time machine: he backup disk image “/Volumes/Data/Sanjeev’s iMac.sparsebundle” could not be created (error (null)). Please could someone help
Has the backup been working ok??
If that is the case simply reboot the TC.. or if that fails, reboot the whole network, restarting in correct order..
modem.. wait 2min
TC.. wait 2min -
The backup disk image ... could not be accessed (error -1).
Thanks to the great Pondini...
http://pondini.org/TM/C17.html -
Please help! Got myself a timecapsule a few months back. I just use it to back up my mac, and also have a wireless printer connected. I have a Macbook Pro (Mac OS X 10.7.3). When I first got my Time Capsule it backed up flawlessly, but in the last few months has started showing the message above. So now it wont back up at all.
Have done probably 2 system updates during this time, and even a firmware update a few days ago for the timecapsule. This recent firmware update seem to fix it for a day, but now the problem is back!!! Even Mac support wasnt able to help last time I called.
HELP HELP HELP!!!
CheersSee #C17 in Time Machine - Troubleshooting
-
Every time I try to back up my Macbook to my time machine, I get this: The backup disk image “/Volumes/Data/Megan Clegg’s MacBook Pro_00254bd6da0a.sparsebundle” could not be accessed (error -1).
I have tried everything! Please help. I have new software, checked keychain passwords... What do you think?See #C17 in Time Machine - Troubleshooting.
-
Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up. -
We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
However, after a couple of minutes- it comes back saying that the disk is unreadable.
I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive.
I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
Help!
Thanks,
Neilneillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here. -
Time Machine did not back up:
Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
How do I correct this issue?
Thanks!You need to be careful Bob.. people might take this literally.
Bob Timmons wrote:
How do I correct this issue?
Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
https://discussions.apple.com/thread/5222487?tstart=0
Maybe you are looking for
-
Short dump error when using count(*)
Hi Experts I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface. I have 1402345 records available
-
We have changed our appleid and password on the computer successfully, now our iphones keep asking for our password to the old appleid and will not accept it. how do i change my appleid on my phone?
-
How to use the created search helps in the program?
Hi Everyone, I know how to create Search help elementary / collective search help through SE 11. I have a question, how can I make use of the created search help in the program. How to use the Search help in the programs, which is created through SE1
-
Motion tween within a symbol (CS5)
hi, im doing an animation (in CS5) for an independent art class and i had a question in short im trying to get a motion tween, which is within a symbol, to show up in the main animation i have a guy who is swinging a sledge hammer using the bone tool
-
When playing iTunes through my stereo via Apple TV I find that "1" on the volume control is too loud. If you switch to Apple TV via the Output tab in the Sound System Preference (via the Apple Menu) you can then use a combination of the iTunes volum