I get an error message (Navigation to the webpage was cancelled), yet everything is working fine

This message shows up on the lower right corner of my screen and there doesn't seem to be any way to delete it

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • I have attempted to update OS X 10.8.4 and keep getting this error message...The operation was cancelled.(3072) Anyone know why?

    I have attempted to update OS X 10.8.4 and keep getting this error message...The operation was cancelled.(3072) Anyone know why?

    You're trying to update an application that's running, perhaps in another account. Make sure you quit all apps that are to be updated. If another user is logged in under Fast User Switching or Screen Sharing, he or she must do the same.

  • Recieve the message "Navigation to the webpage was cancelled" after typing about:config and hitting enter?

    Recently I over cleaned my computer with "Auslogics duplicate file finder program" and have since had problems activating some programs and accessing some websites; for example could not load Adobe Reader PDF files. Then I downloaded Foxit PDF Reader and then I was unfortunately stuck with Ask homepage. I tried to access "about: config" to disable Ask homepage but could not access the about config webpage. I have since reinstalled my homepage, but I would like to know how to access about:config webpage if I need to at some time in the future.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Lync Server 2010 Control Panel - "navigation to the webpage was canceled"

    Hi All,
    I just installed Lync Server 2010. The SQL 2008 is installed on a separate box and both servers are on Windows 2008 R2.
    However, when I try to start the "Lync Server 2010 Control Panel"  i get a blank page with the following message "Navigation to the webpage was canceled"
    The Installation had no errors and went well. But I did have one problem in the Topology Builder where is asked to create a File Share and asked for FQDN and File Share. I entered "Server1.domain.com" and File Share "Poolshare" but it did
    not like it and error with a red cross saying.. 
    "FQDN Server1.domain.com is already used in this topology"
    So in the end I just change it to "Server1" then published and ran the installation sucessfully and all services are started OK
    Any idea? could it be that the file share is not using FQDN?
    Thanks
    ECL

    I have reveiwed this topic but have not been able to fing my answer. I am getting the same result when attempting to connect to the Lync Control Panel and the webpage saying "navigation was canceled..". Here are the details, any assistance is greatly
    appreciated:
    I have an existing OCS 2007 R2 server setup in the domain. My domain is company.CORP. It is a Standard Edition server for IM and Presence only. There is an Edge server as well and I have PIC enabled. My sipinternaltls SRV record to the current SE Front End.
    All works great. There is a SIP.company.com record in the domain too. I am standing up LYNC 2010 environment on HyperV and ran topology builder twice because I had to fix a name. (I see in Mac's comment that I need to run step2 again. Why is that?)
    My Share is on the HyperV server that is hosting the Front End server but they are completely different servernames. My topology published successfully and create some data in the File Share and the Backend DB was created and populated with tables. The certificates
    were successfully applied and all services started right up. The latest version of Silverlight was installed and the server was rebooted. Still the darn White Page with 'Navigation to the webpage was canceled'.
    I am able to go into IIS and launch the Control Panel successfully by browsing on the "cscp" directory for the Lync Server Internal Web Site. I can also connect to the Control Panel by using the
    httpS://admin.company.com/cscp but I have to put  'cscp ' in the path. I cannot browse AD using the Control Panel to find my TestLyncUser1 account but I can find the account, and successfully enable
    the account, using the Lync Management Shell. The account was enables and was able to successfully login to the Lync FE server (manually, since the SRV record point to OCS).
    This is where I am stuck. Why won't it launch from the Programs File Tool and why do I have to designate the CSCP in the URL? I am Not sure why I couldn't browse AD successfully in the Control Panel yet I could with Powershell. I will begin troubleshooting
    that issue next. Could it be because my sip.company.com record points to a different OCS Pool? Or my SRV internaltls record points to the OCS Pool? Microsoft supports standing up the two environments side-by-side and migrating but maybe I am missing something.
    Any ideas anyone?
    I want to add that I will be having a FE Pool and have named and published my second FE but I have not installed it. The Pool VIP is created in DNS and only pointing to FE1 right now.

  • Navigation to the webpage was cancelled  Error in Portal

    Hi All,
    I am getting error Navigation to the webpage was cancelled in SAP Portal when and select few of the
    application like SRM Application , Some external HTMl application.
    Bala

    Hi ,
    I hope you are using IE8 browser. This error usually comes when we go from secure to non-secure environment.
    i.e. from HTTPS to HTTP .
    To resolve this issue you can you below options  :
    1. Change the IE setting which will allow the navigation from secure to non-secure environment.
    2. Use same protocol either HTTP or HTTPS (Basis  Team will help you in this )
    3. Use correct SSL certificate  (Basis  Team will help you in this)
    The First option is very easy , you just need to change the IE setting , Which is explained in
    sapnote 0001427561
    Regards,
    Piyush

  • Navigation to the webpage was canceled

    "Navigation to the webpage was canceled" I get this error when I try to login to System Monitoring/Administration
    We have newly configured solman. Can anyone please hint at what the error could be?
    Thanks
    Prasad

    The hosts file entry was not maintained!
    The problem is resolved now, thanks

  • Navigation to the webpage was cancelled

    Hi All,
    I am getting error Navigation to the webpage was cancelled when i click on SRM Application.
    Bala

    Hi ,
    I hope you are using IE8 browser. This error usually comes when we go from secure to non-secure environment.
    i.e. from HTTPS to HTTP .
    To resolve this issue you can you below options  :
    1. Change the IE setting which will allow the navigation from secure to non-secure environment.
    2. Use same protocol either HTTP or HTTPS (Basis  Team will help you in this )
    3. Use correct SSL certificate  (Basis  Team will help you in this)
    The First option is very easy , you just need to change the IE setting , Which is explained in
    sapnote 0001427561
    Regards,
    Piyush

  • Navigation to the webpage was cancelled Solution Manager 4

    Hi Experts,
    I am accessing Solution Manager, We have servers configured on it
    The problem I am getting is
    DSWP - When I click on any server it says NAVIGATION TO THE WEBPAGE WAS CANCELLED.
    RFC Connections and SLD Connecitions are fine
    Please let me know.
    Thanks & Regards,
    Vikram

    Hi Vikran,
    I think you are not using the correct FQDN, could you kindly fix it?
    Please look at note 654982, for the requirement of FQDN. After you have
    set it, please kindly restart the Solman system and make sure it is
    loaded correctly. (run report RSPFPAR to double check.)
    The FQDN mean (Full Qualified Doman Name), which is set in parameter of
    the instance profile icm/host_name_full
    -please make sure All PCs including solman server itself can ping the
    FQDN, and the port 8001 is not blocked
    - Then make sure the browser in client PC can be load the URL as per
    below. (set proxy, network ports, etc correctly, this you have to ask
    your network colleague)
    http://<FQDN>:8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?
    for e.g. my test system
    http://mysapuni-kul.sap.com
    :8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?

  • Every time I try to send an email, I get an error message which says "The recipient was rejected by the server because it does not allow relaying" How can I fix this?

    My email is not working properly, I can receive emails but I cannot send them. Every time I try to send an email an error message appear saying "The recipient was rejected by the server because it does not allow relaying". There used to be no problem with my email it has only come up recently. Also, my Internet works fine. I have tryed restoring my iPad to factory settings but it still doesn't work. Does anyone know how to fix it?

    try to check the email id   of the guy you are trying to send the email to as i had the same problem i had written yahoo.com when it was yahoo.in 

  • ITunes wont download the restoring software for my itouch it gets finished and gives me an error message that says the network conection timed out but it works fine what do i do?

    i tunes wont download itouch restoring sotware it gets finished and gives me an error message saying the network conection timed out but its working fine what do i do?

    I have this same problem, i though it was my internet (super slow) it would take 3 HOURS!! to download the update and then after all the waiting, it would say "network connection timed out" Ive restarted it and checked my settings over and over but it still says "timed out" wat should I do?!?

  • Always get an error message on startup the connection was lost. don't know how to get around this.

    always get this screen:
    The connection was reset
    The connection to the server was reset while the page was loading.
    * The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    * If you are unable to load any pages, check your computer's network
    connection.
    * If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    nothing I try in the settings seems to get around this
    == This happened ==
    Every time Firefox opened
    == don't remember

    try to check the email id   of the guy you are trying to send the email to as i had the same problem i had written yahoo.com when it was yahoo.in 

  • OOB Navigation to the webpage was cancelled

    Hi
    I have the following scenario:
    I wrote a silverlight app that I host on my dev server. when you browse to the website that I host, my silverlight app launches and everything is fine. However, when I run it out of browser, I get the following error:
    ftp://ftp.tut.ac.za/uploads/jpg kak.jpg
    on application startup. It doesn't even try to load any of my content
    Now, the weird thing about it is that this only happens on my friend's pc who is running win7. I've tested the app on other win7 and xp machines and the OOB works fine, its just his pc that has this error.
    Now I've played around with all his IE security settings and disabled all of them but to no avail. I've reset IE's security to factory and still no cigar. I've also installed Firecox but still nothing. His internet connection is on permanently, so I dont
    see why it would give such an error. I've also tried disabling the firewall. I'm pretty much ready to tell him to format, but then if I get this error again from one of my clients then I still wont know what the cause is.
    As far as I'm concerned this must be a security thing, but then again, I've been wrong before...
    has anybody seen this behaviour before? As I said , this only happens OOB, and his silverlight is updated.

    So, your App is fine. The problem is on your friend's PC.
    Yes, my app works fine, its just his pc that gives this error
    Are these all error message or there are more? Need more information. Thanks.
    Yup, unfortunately that is all I get. I've reinstalled silverlight many times and still the same issue. I installed the developer runtime aswell to see if I get any meaningfull exceptions but atlas, it just gave a general exception at startup( cant remember
    the full trace, I just remember it crashed at app startup. Will see if I can get it again)
    Futher note:
    When I had firefox as the default browser and launched my app, a "save file" dialog would popup. This popup would then want to save index.html. After I then saved the file, the app would display the error msg seen in the jpg. I opened the "index.html" that
    popped up in the dialog in a notepad and it would be my app homepage.
    So it is able to retrieve the homepage of my app, yet be unable to display it. And this only happens on his pc. I have tested it on other pc's without fail

  • Microsoft Lync Server 2013 Control Panel "Navigation to the webpage was canceled"

    i'm facing this issue on the last 2 days.My Lync server 2013 was seted up a month ago and everything went fine on the installation.
    Lync server 2013 on Windows 2008R2 SP1.
    I could login to the Control Panel (using domain administrator credentials), create users (including myself) manage clients etc.
    i didn't login to Lync server for at least a week, beacause i didin't have any other user to add. When time came to add a new user to Lync, i got this error whenever i try to open Control Panel.
    i didn't change anything during this time, so i'm really confused by this.
    i've checked everything from the start and all seem to be in place.
    i also can't open the admin page from the local host as i get an error
    HTTP error 403.4 - Fobidden.
    i tried also to create new certificates for Lync server, but issue remains.
    Also, any solutions i've read for this problem doesn't work as everything is placed correct as other users suggest.
    Can anyone please help me further?
    Cheers,
    Elias

    Ok I had the same problem, I missconfigured the admin simple url in topology builder (TB) which I fixed.  Also the default certificate in the FE server did not have a SAN entry for the "admin" simple url (which was an error). 
    So I corrected the admin address in TB republised it, redid step two on the FE, reissued adn replaced the old cert.  The new cert had the corrected admin simple url.  Checked IIS on the server and made sure that the internal web server had the
    right certificate, restarted IIS.
    The default Lync control pannel still did not come up, I rebooted the server, the closest I got was being prompt for my credential which it did not accept.
    Finally control pannel came up with https://localhost/cscp but I got prompted becuase of a certificate missmatch:
    but it still worked!!! Very very wierd.  I have not changed CA servers.  I am interested about why this happened....
    [email protected]        BK
    Bob Krangle

  • I cannot access my ebay account. I can still look for stuff but if I try to login in I get an error message saying that the connection was reset. This is the only site I am having issues with. The site works with IE6 but I would rather use Firefox.

    - Was having problems accessing messages on Facebook, seems to be working now
    - Cannot login on ebay.ca or ebay.com
    - Having troubles listing items on ebay (uploading pictures)... this started before the logging in problems
    - Problems only on laptop, other PC in the not having any problems
    - Can log in to ebay using IE on laptop, but I would rather use Firefox

    HouFunGuy wrote:
     One thing I notice is that the _mmServerScripts folder does not show up in my Local Files folder - even after refreshing. (The underscore must hide this folder?)When I change the drop-down from Local View to Testing Server I don't see the _mmServerScripts folder, and all folders are red.
    The underscore at the beginning of the folder name hides it in the Files panel, although you can turn on the option to display hidden files by accessing the panel options menu.
    The folder icons in the Files panel are colour coded: green is for local files, red represents the testing server (or Subversion repository, if defined), and yellow (Windows) or blue (Mac) represents your remote server.
    As Randy says, check the Web URL in your testing server definition. It should be http://localhost/check_php/.

  • When I publish HTML Help from FrameMaker 12, I get a usable .chm, but if I copy the entire output folder to a network drive, I get a "Navigation to the webpage was cancelled" error instead of the content that shows locally.

    I'm sure I'm missing something basic here, but any assistance is appreciated.

    News flash – CHM on servers disabled – check out http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm

Maybe you are looking for