I get an error message saying "is not registered with iMessage"?
How do I sync my contacts, so I can send iMessages?
Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.
Similar Messages
-
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
TestnTag wrote:
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage. The destination device must be registered with the Apple servers by turning on iMessage. Therefore, the user with the iPhone must enable it for iMessage. -
I have an iPod touch 5th generation (7.1.2) that has not been sending iMessages to other iMessage users. At first my iPod would not let me sign in to use iMessage, but I searched on different discussion boards that helped me log in. Now the trouble is not being able to send messages at all. I tried to delete the contact I was trying to message and restart the conversation board, but that didn't help at all. The contact continues to say 'xxxxxx not registered with iMessage" when, in fact, they are. I need help to resolve this issue.
ThanksCan you receive Message?
If so can you reply?
Have you tried when connect to another network?
Also see:
iOS: Troubleshooting Messages
Using FaceTime and iMessage behind a firewall -
I have reset my apple id and password, but I am still getting an error message indicating, "wrong account associated with this id/password" !!!
Any thoughts as to why?What exactly do you mean by the statement that you have reset your Apple ID and password. I am not familiar with being able to reset and Apple ID.
-
my facetime wont open it askes to verify email i gort the email verified it and then i wait for awhile than i get a message saying that facetime couldnt verify email and to check network connectivity but i am connected to the internet. what do i need to do to get my factime working again?
Hey Desireeesamaroon,
Thanks for the question. I understand that you are experiencing issues with FaceTime on your Mac. The following resource may help you troubleshoot these issues:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks,
Matt M. -
Error message: "framework not found!" occurs every time I try to track a package on FedEx site. No problem on IE, just Firefox.
== This happened ==
Not sure how often
== TodaySame problem - started 8/2/10.
-
The title pretty much sums it up. What do I do now??
I am currently running Windows 7: Service Pack 1. For Lightroom, I am running the Stand-Alone version 5.6 and am Trying to auto-update to 5.7 through the Lightroom "Help" menu. I have provided a screenshot of the error in this reply.I tried to zoom in on the error but Windows zoom functions would not allow. Sorry. Thank you!
-
HT201210 i get an error message saying that a session could not be started.
i am using an iphone 3g. i am only trying to get the iphone to work as an ipod. it has been reset and when i try to restore it i get an error message saying that cant continue with activation at this time try again later. i am trying to fix that rror by updating the iphone. that is when i get the error stating that they cant start a session. i tried a couple fixes but i dont know how
Same - with latest Itunes version 10, iphone 3gs, ipad 2 and new ipad all on iOS6. Tried rebooting attached, not attached, even reinstalled itunes. same problem - will sync fine but refuses to backup or restore. Windows 7 also. Itunes bug since the last version 10. Also restarted the Apple Mobile device service to no avail.
-
I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks
Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?
If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]] -
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
So I downloaded the latest iTunes 10 version. When I go to open iTunes I get an error message C:\Program Files (x86)\Common Files\Apple\Apple Application Support\QuartzCore.dll is either not designed to run on Windows or it contains an error. Try installing the program using the original installation media or contact your system administrator or the software vendor for support. So I tried to download it again and I get a little box saying Repair or Remove and I have tried to do both but then I get an error message saying another installation is in process and to try again later. Anyone have any ideas on how to fix this?? Any help is greatly appreciated.
If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll. -
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?
try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.
Maybe you are looking for
-
Adobe Bridge Web Gallery looks great in all browsers except Firefox 13
I'm not sure if this is a coding issue within Dreamweaver or if it has to to with the bridge gallery. The gallery looks perfect in all of the browsers except for Firefox 13 and Firefox 11 OSX. Firefox pushes it all the way to the left. Any help wo
-
Won't power on after checking battery for exchange program
This is so silly its not even funny. I simply shutdown my 12" 1.5Ghz power book. Took the battery out to read the serial number, which by the way is one of the faulty ones. Then put it back in and now it won't power on. Pressing the power button does
-
I moved some Appleworks documents from my G5 Power Mac to my macbook pro. It is now obvious to me that my documents cannot be opened because the application is not there. Does anyone know when Appleworks might be available for this computer?
-
BW 3.5 upgrade to BW 7.3
Dear Expert : We also have a plan to updrade BW 3.5 to BW 7.3. I have following questions need you kindly sharing your experience. We will plan to perform Technical upgrade from BW 3.5 to BW 7.3, After that we will migrate BW 3.5 Object to BW 7.3 nat
-
Can't enter games!!!
After doing the upgrade to iOS 5 for my iPad2, everything went well... BUT NOW I CAN'T PLAY ANY GAMES!!!