I get an error message when I scan a file and try to e-mail or save it as a pdf?
When I scan and hit save as pdf, I get and error that says check properties for the file to make sure it is not a read only?
I recently installed Mavrick 10.90 on my Mac book pro. I have a HP 4500 printer scanner. and I have Adobe 11.0. My wife suggested that I uninstall the printer software and re-install it. After I did that, the problem was solved.
Similar Messages
-
When I try to launch the edit tab, I get a error message to close restart my computer and try again.
The editor saved prefs often get corrupted. This is because PSE saves your settings each time you close the application. Problems can sometimes occur if you don’t let the program close properly or if you launch another application too quickly whilst closing down Elements. You may need to rebuild the editor preferences to resolve any conflicts. To begin, close Elements.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. After a few seconds release the three keys and look behind the welcome screen by closing it. Alternatively hold down the three keys whilst clicking on the desktop icon for the Editor or PhotoshopElementsEditor.exe in the Programs folder. Keep holding down all three keys for a few seconds; then release. You should get the settings option.
When you see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Then wait whilst Elements rebuilds the preferences. -
Every time I log onto Firefox I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
I would like to fix whatever is causing this error message to appear, but I haven't found my, "application's profile directory" so that I can check for "read/write restrictions". My hard drive is 640GB with 554GB free space remaining.
I am running Windows 7 - 64 and am using Avast Internet Security 2013.The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]]. -
Hello everyone. I need help.
I have an Illustrator file that I created and then saved.When I tried to reopen the file I got the error message
Offending operator: Bg
Context:
-293.6436 3.81445 -303.502 -12.5605 -314.9639 -24.0186 c
Bb
1 (Unnamed gradient 2) 0 0 90 1 1 0 0 1 0 0 Bg
Waiting for reply.Eneas,
This is a case of file corruption.
One thing often tried first is to create a new document and File>Place the (PDF contents, if any, of the) corrupted one to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html -
Error message when I open Word document and try to convert it?
I keep getting a message stating that it is not a fully supported file or was damaged, e.g. it was sent as an email attachment and was not correctly decoded. Even when I start a new Word document, I get this same error message. Please help.
If I remember correctly, it wasn't a conscious decission, but a (perhaps voluntary?) mistake. Somebody pressed a wrong button somewhere, and all the FAQs were gone for ever, without any chance of recovery to the best of my knowledge.
-
How to avoid getting bogus error messages when running a build file?
Consider the following fragment in a build file:
<var name="component.key" value="provisioning.include.atk"/>
<var name="provisioning.include.atk.domain.hostname" value="localhost"/>
<echoNested>component.key.domain.hostname=${${component.key}.domain.hostname}<
/echoNested>
When we run with ant -v
Result:
Property "${component.key" has not been set
[echoNested] component.key.domain.hostname=localhost
Expected result:
[echoNested] component.key.domain.hostname=localhost
Can someone explain why I am getting the message "Property "${component.key" has not been set"?
Thanks,
PrasannaIn your ANT script you can not use "${${" together
Please refer to http://jaysensharma.wordpress.com/2009/12/06/ant_basics/
You can do something like this:
*"build.xml"*
<project name="webservices-complex" default="runSuccess">
<property name="component.key" value="localhost" />
<property name="component.key.domain.name" value="localhost" />
<target name="runSuccess" >
<echo message="${component.key}" />
</target>
<target name="runSuccess2" >
<echo message="${component.key.domain.name}" />
</target>
</project>
Edited by: Jay SenSharma on Feb 11, 2010 11:49 AM -
The plug in version is 6.2.0.29, which shows that is supports my camera.
Hi Sully172,
Please check the below link
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
It clearly states that D7100 requires a minimum camera raw version of 7.4
I would advise you to either use the camera raw dng converter or upgrade to Photoshop Elements 13.
Thanks -
Error message when importing data using Import and export wizard
Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I get an error message when starting itunes
Hi, i'v ehad this problem for a while .. i'm not a computer expert but i do my best. I get an error message when clicking to start iTunes ... can someone help me ! i don't want to lose my songs !
top fixes are
- turning off security software before the install as Apple suggests
- installing QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
- setting up Norton to allow iTunes
- scanning for malware with ewido (Free at www.ewido.net/en/)
In your case, if iTunes was working OK for a while and then mysteriously stopped, youve got a virus, I bet. Do the ewido malware scan. -
I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install. if i do this will i loose my files and music?
No, you should not lose anything.
-
I get an error message when I try to save my images in Photoshop CS6
I get an error message when I'm trying to save my images. It reads as follows:
"Could not save because file is locked, you do not have necessary access permissions or another file is using it"
The file is not locked (I unlocked the image as a layer), I am the administrator, and it wasn't being used elsewhere.
This has happened with all the images I've worked on in the past 90 minutes. Has anyone got a solution? I've never gotten this message beforeCheck that you actually have write permissions on the drive you are trying to save to. They can an do get changed.
-
I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.
See:
iPhone - not enough access privileges: Apple Support Communities -
I get an error message when I sync my iPhone 5 with iTunes on my Windows 7 Samsung laptop. I recently backed up all of my data using Samsung Recovery Solution 5 to an external hard drive so that I could restore my laptop. I put all of my data back on the restored laptop and reinstalled iTunes. After the error message that says that certain items could not be found and the "sync" is finished I go back to my music in iTunes and there are exclamation marks next to many songs. I follow some instructions regarding the Edit - Preferences - Advanced settings and the exclamation marks go away until I try to sync my phone again. Then I get the same error message and the exclamation marks return. I have uninstalled and reinstalled iTunes and the same thing happens again. I am about to schedule an appointment with the Genius Bar but would like to avoid that if possible. Thank you in advance for any help.
Hello Courtney,
Thank you for the details of the issue you are experiencing when syncing your music to your iPhone. It sounds like iTunes is not able to locate the original file for the song to transfer it to your device. I recommend reviewing the following articles to locate you music files on your computer:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I had to reinstall itunes and now I get an error message when i try to open it please help
i had to reinstall itunes and now I get an error message when i try to open it please help
Please make sure to post the error message here, then we can help you decypher it.
You may want to make sure you're installing the right version of itunes. If you have a 64bit system, you will need to make sure to download and install the 64bit version of iTunes.
http://support.apple.com/kb/DL1427
Maybe you are looking for
-
Hp pavilion p7-1167c windows 7 64bit
Boots up most of the time with a "Default" desktop. File folders etc. are no longer on desktop but appear in program list. Fire Fox browser is in default with no saved information. Sometimes after various restore operations my regular desktop appears
-
What display bracket can I use to raise my new 21.5in iMac?
I just ordered a 21.5 in iMac and I'm trying to find an desk mount that will allow me to raise it off the desk. All the found arm mounts seem to say they are not compatible with the latest 21.5 in iMacs. Which one can I use?
-
Username and password in SQL Plus
What happend to the Username/Password Scott/Tiger. I have installed Oracle9i, then i ran SQL-Plus, typed Scott in username and Tiger in Password. I only got ORA-12560 error. I also tried System/Manager, but got the same error. Can anyone help? Best R
-
Won't open Outlook Express compose window when I click on a website's Mailto link
I have Firefox 3.6.10 running on Windows XP on my desktop. When I am at a website with a Mailto link and click on the link, I expect my Outlook Express compose window to open. This is because Firefox's Tools>Options>Applications>mailto for Outlook Ex
-
Error when update to OS4.2 solved in win7
I got an error in Itunes when i tried to updated my firmware from 4.1->4.2 *My software:* Win 7 Itunes 10.1.0.54 Zonealarm PRO Tried several times to update, changed to a different USB hub, restarted Itunes, rebooted computer and nothing worked to so