I get an error when I try to update airport

Iget an error when I try to update airport

What do you want to do with your AirPort, and what kind is it (Extreme, Express, Time Capsule)?

Similar Messages

  • Any one know what error -5000 is?  I get this error when I try to update to IOS 5 on my 3gs phone.

    Any one know what error -5000 is?  I get this error when I try to update to IOS 5 on my 3gs phone.

    I am also facing the same issue.
    four days back, my power buttton stopped working.
    Then my sim card slot stopped reading like it was stuck at gsm/cdma band.
    Even without simcard it said searching..
    then I changed the power button and antenna strip myself as my iphone5 is uk ee and i live in india.
    Everything was fine and I booted the phone.
    The power button worked like a new device... but the searching problem still remained.
    I hard resetted my phone but to no vail. even Find My phone was not turning off.
    then I forced my phone to recovery mode and downloaded iphone5,2 7.0.2,11A501_restore.ipsw from web and flashed it.
    At the start it recognised and everything was good until the "restoring iphone firmware" was stuck at the end point.
    I tried every trick on net. Even tried to downgrade.. but it was blocked.
    at the last it is either stuck at firmware or itunes unknown error (3)
    Please somebody help me to recover this PAPERWEIGHT to a phone again...

  • I get an error when I try to update to version 7.0.4 on my iPad 2

    When I try to download the software update to 7.0.4, I get a error message saying there was an error downloading the software.

    Have you tried updating with iTune (tap to enlarge image)?

  • I get an error when i try to update the latest update

    For the last month, I have tried to update after affect latest update, but every time i try to install it ,i get a error that the download has failed

    You may try downloading the update using below link and try updating it manually by Running the dmg file.
    http://prodesigntools.com/swupdl/updates/oobe/aam20/mac/AdobeAfterEffects-13.0.0-Trial/13. 0.2/setup.dmg
    Then Quit and re-launch Creative Could App check if it showing up to date.

  • Why am I getting an error when I try to update my Airport software?

    I'm trying to update my using Airport Utility software and I get the error that it can not find the airport.msi file? I've looked for the file on my PC and on the original install disk and can't find it? What am I doing wrong or is this an Apple issue?

    Hello,
    I can't uninstall it, can't repair it, can't even down load from the apple site the latest version and install without it looking for this apple.msi. I tried to update the firmware, and now the Airport Utility will not even work!
    Very frustrating. I am connected to the Internet via it. But this still doesn't make sense.

  • Error "This serial number is not for a qualifying product..." when installing an upgrade or upsell. i GET THE ERROR WHEN I TRY TO Update my CS 5 Web premium

    I had to re-install my CS 5 Web Premium as i had to refresh my window. I try to update after activating. Then it says the product is not valid! God knows what's wrong with ADOBE!

    The messages you are receiving indicate that you are trying to install an upgrade version.  You are being asked to enter the name and serial number of the older product that you are upgrading from in order to prove that you qualify for using the upgrade.

  • HT4528 I keep getting an error when I try to update the software.  My phone won't work.  What is going on with it?

    I received notice that my phone had a software update.  When I tried to do it, it said there was an error.  Now I can only connect to the Wifi at home or if a store has a guest account.  I can't make calls or receive calls.  My text won't work.  I am so confused.  How do I fix my phone??

    Hello mjlamonea
    If the update had an error, then check out the article below to restore your iPhone. It will walk you through putting your iPhone into recovery mode and then using iTunes on your computer to restore it. If you have a back up through iTunes or iCloud, then your can put that back up back on after you have completed the restore.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

    I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

    I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and  some people said that they worked.
    Here is the original Link:
    https://discussions.apple.com/thread/2151777?start=0&tstart=0
    OK, this worked for me:( Original Post by r0tt3n4pp13)
    1. Save iTunes install file to your desktop.
    2. Disconnect from internet.
    3. Disable Firewall/Security software.
    4. Run install. Note that it installs Application Support and a bunch of other software this time.
    5. Run iTunes.
    6. Enable Firewall/Security software.
    7. Reconnect to internet.
    8. Download Watchmen Director's Cut post haste.
    OR!
    (Original post by Cr4z33)
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.

  • I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

    I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
    The operation can’t be completed because an unexpected error occurred (error code -50)

    I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
    Unfortunately the error messages are archane and it is hard to discover their meaning.
    You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
    A5. http://pondini.org/TM/Troubleshooting.html
    Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
    If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

  • WHEN TRYING TO DOWNLOAD THE LATEST VERSION OF ITUNES, I KEEP GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.dll was not found

    AFTER DOWNLOADING THE LATEST VERSION OF ITUNES, I CAM GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.DLL WAS NOT FOUND. UNABLE TO LOCATE COMPONENT. BEFORE I REMOVE THIS VERSION AND TRY TO RELOAD AGAIN, JUST WANTED TO BE SURE I WOULDN'T LOSE ALL 200 PURCHASED SONGS ON MY PC.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99220)

  • I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software.

    I just purchased a month to month subscription for Acrobat Pro and I am getting an error when I try to download the software. after about 50% of the way, it just crashes.
    Thank you,
    JTF

    I am having the same problem - the install crashes around 40%. 
    I am using MAC OS 10.10.2 and purchased Acrobat Pro monthly subscription.  The error message is: 
    'Acrobat installer has encountered an unexpected failure.  Please try again.  If it continues to fail, contact Adobe support.'
    I have tried several times but keep getting the same error message.  Any ideas?
    Thanks,
    Cindy

  • "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why?

    "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

    Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

  • TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

    I get "server error" when I try to use icloud.1 on my Windows 7 pc
    How do I resolve this problem?

    Hi doggywag,
    Yes, you must have an iOS device or a Mac to create an iCloud account.
    Cheers,
    GB

  • I get an error when I try downloading files - 8520 Curve

     I get an error when I try downloading files with my 8520 curve...and they say must contact my webmaster

    Hello !
    Could you please be more elaborative for explaining your issue?

  • I get an error when I try to move instances of public folders.

    We have exchange 2003 and exchange 2010 setup in a coexistence environment. I get an error when I try to move instances of public folders from Exchange 2003 to Exchange 2010. "Unable to create the required MAPI profile. Please verify that you have
    sufficient permissions to write to the MAPISVC.INF file. ID no: c103073a Exchange system Manager." I have checked the permissions on the exchange 2003 server. I am unable to locate the MAPISVC.inf file on the exchange 2010 server. This is the last set
    before we begin our move to exchange 2010 and then on to exchange 2013. Any help would be appreciated.

    Hi,
    Do you mean you get the error like the following one?
    An error occurred while trying to establish a connection to the Exchange Server. Be sure that port 443 (for ssl) or port 80 (for non-ssl) can be reached. If you are connecting to the public folders, be sure that the public store is mounted. If you are connecting
    to the mailboxes and the progress bar shows particular mailbox. Be sure that the user has at least one email address.
    Exception failed to connect using secure URL https://gsfcdp16es/esadmin/admin/nyu.email.gs.com/publicfolders with error. 
    The underlying connection was closed. Unable to connect to the remove server.
    Please check if you can expand PF tree in ESM.
    Please make sure SSL is disabled on /ExAdmin and  /Public virtual directory. If possible, you can recreate the ExAdmin virtual directory to check result.
    Best regards,
    Belinda Ma
    TechNet Community Support

Maybe you are looking for

  • Helps for WLP9.2 in a cluster:  deploy errors, propagation errors

    I wrote a document for our portal project's production support that details how to fix several recuring problems with WLP9.2 (GA) in cluster. I'm sharing this with the community as a help. Email me if you'd like updates or have additional scenarios /

  • Shatter theme background color

    I love the shatter theme... Only problem with it is its whie background color. I use this to show slideshow on lcd's in bar and the white kind of lights up the place... way too much. Is there any way at all to change this? Would be great to go from #

  • UI Dimensions for iPhone

    What dimensions should I create the UI as for iPhone development in Flash?    When I created a new AIR for iOS document in Flash 5.5, the default stage size was created at 320 x 480. In Flash 6, the default stage size was created at 640 x 960. I'm as

  • Business Partners and Sales Document

    Hi experts, I have a quistion for you all. Consider the following scenario: I have one opportunity with multiple sales team members assigned to it as well as multiple competitors. Can I view this information in BW a BW report, e.g. per Opportunity, s

  • Getting next line of resultset under certain conditions

    Hello, I have a resultset with a column of ascending numbers. Now I want to compare these numbers to a value. If one of the numbers matches exactly to the value then everything is fine and I can use number <= value as condition. If the value doesn't