I get an error when I want to finish my iMovie project?

I want to finish my I movie project so I can make a dvd of it. I get an error after about an hour of it Formating the finish project. Any Help out there?

''I can clear the cache and get back to my site OK, but other computers running XP also get this problem which means that a great many people can no longer access my site with Firefox. I need to resolve this issue possibly with a change to my link code (It's OK getting to the site via the address or returning with the back button), or a fix to Firefox'''
Problem partially resolved by removing "refresh once" code, although this works OK on my other sites without problems and with other browsers.

Similar Messages

  • Why do I get this error when I want to run a test using Ant?

    Why do I get this error when I run the Ant build file?
    Testsuite: JUnit
    Tests run: 1, Failures: 0, Errors: 1, Time elapsed: 0 sec
    Caused an ERROR
    JUnit
    java.lang.ClassNotFoundException: JUnit
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:242)
    at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
    at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
    at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)

    Abder-Rahman wrote:
    In the "XML" file, I was giving the name of the test as JUnit ---> <test name="JUnit">Well, do you have a class called just "JUnit" that contains a test?

  • I get this error when trying to compile a plain C++ project

    Tool:0: Couldn't run '/usr/bin/gcc-3.3' because it does not refer to an accessible executable.
    I get this error when I try to compile/build a normal C++ project.
    I make a new project. C++ tool. Call it "test"
    It automatically makes a main.cpp file which should output "hello world" but instead I get that error above. Not sure what is going on.

    I'm not sure where the "verbose" icon is, but I did get this, if it helps
    Native Build of Target "Test" using Build Style "Development"
    CompileC build/Test.build/Test.build/Objects-normal/ppc/main.o main.cpp normal ppc c++ com.apple.compilers.gcc.3_3
    cd /Users/Eric/Documents/Test
    /usr/bin/gcc-3.3 -x c++ -arch ppc -pipe -Wno-trigraphs -fpascal-strings -fasm-blocks -g -O0 -Wreturn-type -Wunused-variable -fmessage-length=0 -ffix-and-continue -mtune=G5 -Wp,-header-mapfile,/Users/Eric/Documents/Test/build/Test.build/Test.build/Test .hmap -F/Users/Eric/Documents/Test/build -I/Users/Eric/Documents/Test/build/include -I/Users/Eric/Documents/Test/build/Test.build/Test.build/DerivedSources -c /Users/Eric/Documents/Test/main.cpp -o /Users/Eric/Documents/Test/build/Test.build/Test.build/Objects-normal/ppc/main. o
    And my version of Xcode and such is..
    Xcode 2.0
    Xcode IDE 514.0
    Xcode Core 515.0
    ToolSupport 514.0
    Not sure about the SDK.
    iBook G4 and iPod Mini Mac OS X (10.4.5)

  • Getting an error when I want to run my project on another pc! URGENT!!

    Hey everyone,
    This is my first post. I have a big problem. I created an enterprise application for a college project but now I want to test it on my laptop. Unfortunately when I want to run the project it gives me this error:
    deployment started : 0%
    Deploying application in domain failed;
    Internal Exception: java.sql.SQLException: Error in allocating a connection. Cause: Class name is wrong or classpath is not set for : com.mysql.jdbc.jdbc2.optional.MysqlDataSource
    Error Code: 0
    C:\Wesley Chin J2EE Project\EdHardyClothingStore\nbproject\build-impl.xml:264: The module has not been deployed.
    When I try and deploy the project it wont deploy.
    Any ideas on what i can do to fix it?
    Urgent help please as I have to hand in the project today!
    Thanks soo much in advance,
    Wesley

    Hello Wesley,
    you will need the jdbc driver for your database.
    You will find it on http://dev.mysql.com/downloads/connector/j/3.1.html
    Download it and put it in your glassfish classpath, e. g. [glassfish-root]/domains/domain1/lib/ext and restart the server.
    Greetings,
    Andreas

  • I remember accidently pressing the import all photos instead of the 10 that i wanted, so i clicked delete. Also i always just pull card from computer & get a error when it do it

    I remember accidently pressing the import all photos button instead of the 10 photos that i wanted, so i clicked delete. Another thing i always just pull camera card from computer slot & then get a error when it do it saying i shouldnt do it that way, I just never knew what to do. Sorry I am so ignorant when it comes to computers. I hope you can help this silly blonde

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I keep getting an error when signing in, it wants me to start a trial, but i have purchased the product already?

    I keep getting an error when signing in, it wants me to start a trial, but i have purchased the product already?

    If you purchased a serial number, then click on "License this Product". You will be asked to sign in with your Adobe ID/password and you will be asked for a serial number, or you might click on "I have a serial number".  Once you enter the serial number, it should be properly activated as a permanent license.
    Gene

  • I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

    I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

    SparkchaserEd wrote:
    I am getting an error when resizing the Mac HD.
    What does this error say?

  • I'm getting the following error when I want to put something in Mycloud : 6/02/12 21:00:14,689 Cloud: -[__NSCFDictionary name]: unrecognized selector sent to instance 0x1002d57c0

    I'm getting the following error when I want to put something in Mycloud : 6/02/12 21:00:14,689 Cloud: -[__NSCFDictionary name]: unrecognized selector sent to instance 0x1002d57c0

    I'm getting the following error when I want to put something in Mycloud : 6/02/12 21:00:14,689 Cloud: -[__NSCFDictionary name]: unrecognized selector sent to instance 0x1002d57c0

  • HT201210 my ipod is jailbroken and i wanted to unjailbreak it by updating it , but i always get an error when i do what is another way i can unjailbreak my ipod

    my ipod is jailbroken and i wanted to unjailbreak it by updating it , but i always get an error when i do what is another way i can unjailbreak my ipod.

    You can try putting the iPod into DFU mode and see if that will let you restore and remove the jailbreak:
    http://www.iclarified.com/entry/index.php?enid=1034
    Some jailbreaks cannot be removed and in some cases will permanently disable your iPod. If that happens to you, then you will have to buy a new iPod; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPod.
    You're on your own from here. We can provide no further help with a jailbroken iPod in these forums.
    Good luck.

  • I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...".  Never did burn the DVD.  Any ideas?

    I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...".  Never did burn the DVD.  Any ideas?
    Thanks, Scott

    Hi
    This Q is close to - Something is wrong. What's it ?
    You have to supply much more info to be able to start guessing.
    • What material was used ? Video codec, Audio file format and Photo file format
    • Free space on Start-Up hard disk. How much ?
    • Brand of DVD used ?
    • Type of DVD used ?
    • Burn speed set down or not ?
    • Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
    And all extra info You can supply - that set's us on track.
    Yours wanting to be of help. Bengt W

  • I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work)

    I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work) since I use iCloud and I tunes match

    YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
    Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
    TMI?
    GB

  • WHEN TRYING TO DOWNLOAD THE LATEST VERSION OF ITUNES, I KEEP GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.dll was not found

    AFTER DOWNLOADING THE LATEST VERSION OF ITUNES, I CAM GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.DLL WAS NOT FOUND. UNABLE TO LOCATE COMPONENT. BEFORE I REMOVE THIS VERSION AND TRY TO RELOAD AGAIN, JUST WANTED TO BE SURE I WOULDN'T LOSE ALL 200 PURCHASED SONGS ON MY PC.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99220)

  • I get this error when trying to create a ringtone - iTunes could not connec

    I get this error when trying to create a ringtone:
    "iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
    But I CAN connect - if I click on the iTunes Store, it connects right away.
    I want to make a ringtone from a song that I purchased, but all I get is the same error message.
    iTunes 9.2.2, Ireland iTunes Store.

    have you seen this KB article: http://support.apple.com/kb/HT1398 ?
    JGG

  • I've started getting an error when trying to transfer purchased videos to iPhone.

    I've started getting an error when trying to transfer purchased videos to my iPhone.
    I get an error saying that selected videos will not play on the iPhone. They were purchased from iTunes and have been played on the phone previously.
    So far I've only noticed it on SD/HD videos, but not all SD/HD videos. Not had an issue yet with the judt SD files.
    Anyone else encountered this?
    Ta

    YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
    Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
    TMI?
    GB

  • HT1338 i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

    i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

    I dunno, that doesn't make any sense to me.
    I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes.  There are only 3 that run in 32 bit only.  They are all 3rd party, and none of the prefpanes are non Intel.  Like I said, I have never owned a PPC machine.  Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well.  The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
    As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box.  All using the same hardware. but one at a time.  I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to.  (Which I don't)  I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact.  How could ML system preferences be trying to launch prefpanes from a totally different machine?

Maybe you are looking for